留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 24 Issue 1
Jan.  2017
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  578
  • HTML全文浏览量:  111
  • PDF下载量:  30
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2017  >  24(1): 47-54
Chao-jie Zhang, Yan-ping Bao, Min Wang,  and Le-chen Zhang, Teeming stream protection using an argon shroud during casting of steel ingots, Int. J. Miner. Metall. Mater., 24(2017), No. 1, pp. 47-54. https://doi.org/10.1007/s12613-017-1377-6
Cite this article as:
Chao-jie Zhang, Yan-ping Bao, Min Wang,  and Le-chen Zhang, Teeming stream protection using an argon shroud during casting of steel ingots, Int. J. Miner. Metall. Mater., 24(2017), No. 1, pp. 47-54. https://doi.org/10.1007/s12613-017-1377-6
shu
引用本文 PDF XML SpringerLink
研究论文

Teeming stream protection using an argon shroud during casting of steel ingots

  • State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China

  • 通讯作者:

    Yan-ping Bao    E-mail: baoyp@ustb.edu.cn

  • Two kinds of argon shroud protection devices with two different basic structures were designed and investigated. Industrial experiments and numerical simulations were used to examine the protection effect, and the mechanism of air entrapment during the casting of steel ingots was analyzed. The influence of the structure of the argon shroud protection device on the protection effect was investigated. An argon shroud protection device mounted to the nozzle holder on the bottom of the ladle does not provide a good protection effect because air can easily flow into the teeming system and cause reoxidation of molten steel during teeming. By contrast, an argon shroud protection device seated on the top of the central trumpet provides an excellent protection effect, where air has little chance of flowing into the teeming system during casting. The feasibilities of the argon shroud protection devices are discussed.
    • Research Article

    Teeming stream protection using an argon shroud during casting of steel ingots

    + Author Affiliations
      Abstract
    • Two kinds of argon shroud protection devices with two different basic structures were designed and investigated. Industrial experiments and numerical simulations were used to examine the protection effect, and the mechanism of air entrapment during the casting of steel ingots was analyzed. The influence of the structure of the argon shroud protection device on the protection effect was investigated. An argon shroud protection device mounted to the nozzle holder on the bottom of the ladle does not provide a good protection effect because air can easily flow into the teeming system and cause reoxidation of molten steel during teeming. By contrast, an argon shroud protection device seated on the top of the central trumpet provides an excellent protection effect, where air has little chance of flowing into the teeming system during casting. The feasibilities of the argon shroud protection devices are discussed.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(15)
    • [1]
      C. X. Ji, Y. Cui, Z. Zeng, Z. H. Tian, C. L. Zhao, and G. S. Zhu, Continuous casting of high-Al steel in Shougang Jingtang Steel Works, J. Iron Steel Res. Int., 22(2015), p. 53.
      [2]
      K. Jin, B. G. Thomas, and X. Ruan, Modeling and measurements of multiphase flow and bubble entrapment in steel con tinuous casting, Metall. Mater. Trans. B, 47(2016), No. 1, p. 548.
      [3]
      L. C. Zhang, Y. P. Bao, M. Wang, and C. J. Zhang, Variation and optimization of acid-dissolved aluminum content in stainless steel, Int. J. Miner. Metall. Mater., 23(2016), No. 4, p. 408.
      [4]
      D. Li, X. Q. Chen, P. Fu, X. Ma, H. Liu, Y. Chen, Y. F. Cao, Y. K. Luan, and Y. Y. Li, Inclusion flotation-driven channel segregation in solidifying steels, Nat. Commun., 5(2014), p. 5572.
      [5]
      J. Zhang, F. M. Wang, and C. R. Li, Thermodynamic analysis of the compositional control of inclusions in cutting-wire steel, Int. J. Miner. Metall. Mater., 21(2014), No. 7, p. 647.
      [6]
      L. Zhang and B. G. Thomas, State of the art in the control of inclusions during steel ingot casting, Metall. Mater. Trans. B, 37(2006), No. 5, p. 733.
      [7]
      K. Sumitomo, M. Hashio, T. Kishida, and A. Kawami, Bottom pouring and ingot quality at Sumitomo metal industries, Iron Steel Eng., 62(1985), No. 3, p. 54.
      [8]
      L. Ragnarsson and D. Sichen, Inclusions generated during ingot casting of tool steel, Steel Res. Int., 81(2010), No. 1, p. 40.
      [9]
      N. Tripathi and D. Sichen, Non-metallic inclusions in the ingot and final products of a medium-carbon tool steel, Scand. J. Metall., 33(2004), No. 6, p. 362.
      [10]
      L. Ragnarsson, W. Song, Y. Ma, and D. Sichen, Oxygen penetration in the protection shroud in steel casting, Steel Res. Int., 81(2010), No. 11, p. 965.
      [11]
      Z. J. Zhang, Teeming stream protection technology for ingot casting, Steelmaking, 1988, No. 4, p. 46.
      [12]
      L. Ragnarsson, W. Song, Y. L. Ma, and D. Sichen, Physical and mathematical modelling of argon shroud for protection of steel stream during casting, Int. J. Cast. Met. Res., 23(2010), No. 6, p. 368.
      [13]
      T. W. Sun, Experiment and analysis of argon shroud protection during teeming, Steelmaking, 1991, No. 5, p. 23.
      [14]
      T. J. Zhou, Investigation of the effect of argon protection behavior in the ingot casting process, Baosteel Tech. Res., 9(2015), No. 4, p. 20.
      [15]
      K. Iwata, T. Choh, and M. Inouye, A model experiment on the gas entrainment with pouring liquid steel stream, Trans. Iron Steel Inst. Jpn., 23(1983), No. 3, p. 218.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计