Preparation and performance of dye-sensitized solar cells based on ZnO-modified TiO₂ electrodes

The ZnO-modified TiO₂ electrode was prepared by adding Zn(CH₃COO)₂·2H₂O to the TiO₂ colloid during the sol-gel production process, and was used in dye-sensitized solar cells (DSCs). The open circuit voltage (V_OC) and fill factor (ff) of the cells were improved significantly. The performances of the ZnO-modified TiO₂ electrode such as dark current, transient photocurrent, impedance, absorption spectra, and flat band potential (V_fb) were investigated. It is found that the interface charge recombination impedance increases and V_fb shifts about 200 mV toward the cathodic potential. The effect mechanism of ZnO modification on the performance of DSCs may be that ZnO occupies the surface states of the TiO₂ film.