Behavior of Inclusions in Steel 16MnR

Zhang Xuehui; Han Yuwen; Cai Kaike; Xiao Zhongmin; Meng Fanqing

Volume 5 Issue 2

Jun. 1998

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 1998 > 5(2): 99-99

Zhang Xuehui, Han Yuwen, Cai Kaike, Xiao Zhongmin, and Meng Fanqing, Behavior of Inclusions in Steel 16MnR, J. Univ. Sci. Technol. Beijing, 5(1998), No. 2, pp. 99-99.

Cite this article as:

Zhang Xuehui, Han Yuwen, Cai Kaike, Xiao Zhongmin, and Meng Fanqing, Behavior of Inclusions in Steel 16MnR, J. Univ. Sci. Technol. Beijing, 5(1998), No. 2, pp. 99-99.

Zhang Xuehui, Han Yuwen, Cai Kaike, Xiao Zhongmin, and Meng Fanqing, Behavior of Inclusions in Steel 16MnR, J. Univ. Sci. Technol. Beijing, 5(1998), No. 2, pp. 99-99.

Citation:

Zhang Xuehui, Han Yuwen, Cai Kaike, Xiao Zhongmin, and Meng Fanqing, Behavior of Inclusions in Steel 16MnR, J. Univ. Sci. Technol. Beijing, 5(1998), No. 2, pp. 99-99.

PDF( 91 KB)

Behavior of Inclusions in Steel 16MnR

+ Author Affiliations

Abstract

Abstract

The regularity of the development of inclusions and the cleanliness level of the steel 16MnR during the whole process are investigated. The emphasis is focused on the type, quantity, distribution, sources and formation of the large oxide inclusions in ingot. The result shows that the major inclusions in ingot are block Al₂O₃. The large oxide inclusions mainly come from entrapment of complex slags.
- 16MnR;
- ingot;
- inclusion;
- cleanness