A. Ramírez-López, R. Aguilar-López, A. Kunold-Bello, J. González-Trejo, and M. Palomar-Pardavé, Simulation factors of steel continuous casting, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp. 267-275. https://doi.org/10.1007/s12613-010-0304-x
Cite this article as:
A. Ramírez-López, R. Aguilar-López, A. Kunold-Bello, J. González-Trejo, and M. Palomar-Pardavé, Simulation factors of steel continuous casting, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp. 267-275. https://doi.org/10.1007/s12613-010-0304-x
A. Ramírez-López, R. Aguilar-López, A. Kunold-Bello, J. González-Trejo, and M. Palomar-Pardavé, Simulation factors of steel continuous casting, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp. 267-275. https://doi.org/10.1007/s12613-010-0304-x
Citation:
A. Ramírez-López, R. Aguilar-López, A. Kunold-Bello, J. González-Trejo, and M. Palomar-Pardavé, Simulation factors of steel continuous casting, Int. J. Miner. Metall. Mater., 17(2010), No. 3, pp. 267-275. https://doi.org/10.1007/s12613-010-0304-x
The factors involved in simulating the continuous casting process of steel and the effects of the factors on the thermal behavior were investigated. The numerical methods and the influence of some assumptions were also analyzed, such as nodes used to discretize the steel in array size and computing time to obtain good approaches. The results show that some of these factors are related with the design of the continuous casting plant (CCP), such as geometrical configuration, and the operating conditions, such as water flow rate, heat removal coefficient in the mold, casting times, and casting speed in the strand, which affect the heat removal conditions over the temperature and solidification profiles.
The factors involved in simulating the continuous casting process of steel and the effects of the factors on the thermal behavior were investigated. The numerical methods and the influence of some assumptions were also analyzed, such as nodes used to discretize the steel in array size and computing time to obtain good approaches. The results show that some of these factors are related with the design of the continuous casting plant (CCP), such as geometrical configuration, and the operating conditions, such as water flow rate, heat removal coefficient in the mold, casting times, and casting speed in the strand, which affect the heat removal conditions over the temperature and solidification profiles.
下载: