留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 17 Issue 4
Aug.  2010
数据统计

分享

计量
  • 文章访问数:  251
  • HTML全文浏览量:  71
  • PDF下载量:  12
  • 被引次数: 0
Na Li, Zhen-yu Liu, Guo-ping Zhou, Xiang-hua Liu,  and Guo-dong Wang, Effect of phosphorus on the microstructure and mechanical properties of strip cast carbon steel, Int. J. Miner. Metall. Mater., 17(2010), No. 4, pp. 417-422. https://doi.org/10.1007/s12613-010-0334-4
Cite this article as:
Na Li, Zhen-yu Liu, Guo-ping Zhou, Xiang-hua Liu,  and Guo-dong Wang, Effect of phosphorus on the microstructure and mechanical properties of strip cast carbon steel, Int. J. Miner. Metall. Mater., 17(2010), No. 4, pp. 417-422. https://doi.org/10.1007/s12613-010-0334-4
引用本文 PDF XML SpringerLink

Effect of phosphorus on the microstructure and mechanical properties of strip cast carbon steel

  • 通讯作者:

    Na Li    E-mail: huatsing2006@yahoo.com.cn

  • Carbon steel strips with different phosphorus and carbon contents were produced by using the twin roll strip casting process. Fine grains and dendrite structure were observed in high-P steels. Negative phosphorus segregation was found in strip cast high-P and high-C steels. For the steels with different carbon contents, phosphorus distribution in the thickness direction of the strip is obviously different. This is because solutes are redistributed in the melting pool and the phosphorus segregation rate is associated with the length of the mushy zone and the phosphorus solubility in different phases. Phosphorus as a solute in ferrite can lead to the higher hardness and strength with lower plastic propertyies.
  • Effect of phosphorus on the microstructure and mechanical properties of strip cast carbon steel

    + Author Affiliations
    • Carbon steel strips with different phosphorus and carbon contents were produced by using the twin roll strip casting process. Fine grains and dendrite structure were observed in high-P steels. Negative phosphorus segregation was found in strip cast high-P and high-C steels. For the steels with different carbon contents, phosphorus distribution in the thickness direction of the strip is obviously different. This is because solutes are redistributed in the melting pool and the phosphorus segregation rate is associated with the length of the mushy zone and the phosphorus solubility in different phases. Phosphorus as a solute in ferrite can lead to the higher hardness and strength with lower plastic propertyies.
    • loading

    Catalog


    • /

      返回文章
      返回