Mehdi Rahimi, Fahimeh Dehghani, Bahram Rezai, and Mohammad Reza Aslani, Influence of the roughness and shape of quartz particles on their flotation kinetics, Int. J. Miner. Metall. Mater., 19(2012), No. 4, pp. 284-289. https://doi.org/10.1007/s12613-012-0552-z
Cite this article as:
Mehdi Rahimi, Fahimeh Dehghani, Bahram Rezai, and Mohammad Reza Aslani, Influence of the roughness and shape of quartz particles on their flotation kinetics, Int. J. Miner. Metall. Mater., 19(2012), No. 4, pp. 284-289. https://doi.org/10.1007/s12613-012-0552-z
Mehdi Rahimi, Fahimeh Dehghani, Bahram Rezai, and Mohammad Reza Aslani, Influence of the roughness and shape of quartz particles on their flotation kinetics, Int. J. Miner. Metall. Mater., 19(2012), No. 4, pp. 284-289. https://doi.org/10.1007/s12613-012-0552-z
Citation:
Mehdi Rahimi, Fahimeh Dehghani, Bahram Rezai, and Mohammad Reza Aslani, Influence of the roughness and shape of quartz particles on their flotation kinetics, Int. J. Miner. Metall. Mater., 19(2012), No. 4, pp. 284-289. https://doi.org/10.1007/s12613-012-0552-z
Surface roughness and shape play an important role on the behavior of particles in various processes such as flotation. In this research, the influence of different grinding methods on the surface roughness and shape characteristics of quartz particles as well as the effect of these parameters on the flotation of the particles was investigated. The surface roughness of the particles was determined by measuring their specific surface area via the gas adsorption method. The shape characteristics of the particles were measured and calculated by images obtained by scanning electron microscopy via an image analysis system. The flotation kinetics was determined using a laboratory flotation cell. The results showed that the particles of rod mill products have higher roughness and elongation ratio and lower roundness than the particles of ball mill products. The flotation kinetics constant of the particles increased with their surface roughness increasing. Particles with higher elongation and lower roundness indicated higher floatability. In addition, the influence of the surface roughness on the flotation kinetics was greater than that of shape parameters.
Surface roughness and shape play an important role on the behavior of particles in various processes such as flotation. In this research, the influence of different grinding methods on the surface roughness and shape characteristics of quartz particles as well as the effect of these parameters on the flotation of the particles was investigated. The surface roughness of the particles was determined by measuring their specific surface area via the gas adsorption method. The shape characteristics of the particles were measured and calculated by images obtained by scanning electron microscopy via an image analysis system. The flotation kinetics was determined using a laboratory flotation cell. The results showed that the particles of rod mill products have higher roughness and elongation ratio and lower roundness than the particles of ball mill products. The flotation kinetics constant of the particles increased with their surface roughness increasing. Particles with higher elongation and lower roundness indicated higher floatability. In addition, the influence of the surface roughness on the flotation kinetics was greater than that of shape parameters.
下载: