Naganathan Sivakumar, Abdul Razak Hashim, and Abdul Hamid Siti Nadzriah, Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 536-541. https://doi.org/10.1007/s12613-012-0592-4
Cite this article as:
Naganathan Sivakumar, Abdul Razak Hashim, and Abdul Hamid Siti Nadzriah, Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 536-541. https://doi.org/10.1007/s12613-012-0592-4
Naganathan Sivakumar, Abdul Razak Hashim, and Abdul Hamid Siti Nadzriah, Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 536-541. https://doi.org/10.1007/s12613-012-0592-4
Citation:
Naganathan Sivakumar, Abdul Razak Hashim, and Abdul Hamid Siti Nadzriah, Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 536-541. https://doi.org/10.1007/s12613-012-0592-4
The performance of industrial waste incineration bottom ash in controlled low-strength material (CLSM) was investigated in this paper, as the quarry dust was added. CLSM mixtures were made from the industrial waste incineration bottom ash, quarry dust, and cement. Tests for fresh density, bleeding, compressive strength, shear strength, hydraulic conductivity, and excavatability were carried out. The compressive strength ranges from 60 kPa to 6790 kPa, the friction angle varies from 5° to 19°, and the cohesion is from 4 to 604 kPa. Most of the mixtures are found to be non-excavatable. It is indicated that the quarry dust addition increases the compressive strength and shear parameters, decreases bleeding, and increases the removability modulus.
The performance of industrial waste incineration bottom ash in controlled low-strength material (CLSM) was investigated in this paper, as the quarry dust was added. CLSM mixtures were made from the industrial waste incineration bottom ash, quarry dust, and cement. Tests for fresh density, bleeding, compressive strength, shear strength, hydraulic conductivity, and excavatability were carried out. The compressive strength ranges from 60 kPa to 6790 kPa, the friction angle varies from 5° to 19°, and the cohesion is from 4 to 604 kPa. Most of the mixtures are found to be non-excavatable. It is indicated that the quarry dust addition increases the compressive strength and shear parameters, decreases bleeding, and increases the removability modulus.
下载: