Laboratory of Applied Physics and Mechanics of Advanced Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China
Key Laboratory of Interface Science and Engineering in Advanced Materials (Ministry of Education), Taiyuan University of Technology, Taiyuan, 030024, China
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, 100083, China
MicroNano System Research Center, Taiyuan University of Technology, Taiyuan, 030024, China
Zr-based bulk metallic glass matrix composites (BMGMCs) with a composition of Zr60.0Ti14.7Nb5.3Cu5.6Ni4.4Be10.0 (at%) were fabricated by an innovative process, i.e., semisolid processing plus Bridgman solidification. Different morphologies, distributions, and volume fractions of the crystalline phases can be achieved by tailoring the withdrawal velocity. The largest fracture strain of Zr60.0Ti14.7Nb5.3Cu5.6Ni4.4Be10.0(at%) composites with the withdrawal velocity of 1.0 mm/s was found to be 16.7%. The mechanism of plasticity improvement is mainly attributed to the interpenetrated structure of the crystalline phase, which greatly confines the rapid propagation of shear bands.
Laboratory of Applied Physics and Mechanics of Advanced Materials, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, 030024, China
Key Laboratory of Interface Science and Engineering in Advanced Materials (Ministry of Education), Taiyuan University of Technology, Taiyuan, 030024, China
State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing, 100083, China
MicroNano System Research Center, Taiyuan University of Technology, Taiyuan, 030024, China
Zr-based bulk metallic glass matrix composites (BMGMCs) with a composition of Zr60.0Ti14.7Nb5.3Cu5.6Ni4.4Be10.0 (at%) were fabricated by an innovative process, i.e., semisolid processing plus Bridgman solidification. Different morphologies, distributions, and volume fractions of the crystalline phases can be achieved by tailoring the withdrawal velocity. The largest fracture strain of Zr60.0Ti14.7Nb5.3Cu5.6Ni4.4Be10.0(at%) composites with the withdrawal velocity of 1.0 mm/s was found to be 16.7%. The mechanism of plasticity improvement is mainly attributed to the interpenetrated structure of the crystalline phase, which greatly confines the rapid propagation of shear bands.
下载: