Xian-hui Li, Qing-zhi Yan, Yong-jun Han, Mei-qi Cao, and Chang-chun Ge, Fabrication of solid-phase-sintered SiC-based composites with short carbon fibers, Int. J. Miner. Metall. Mater., 21(2014), No. 11, pp. 1141-1145. https://doi.org/10.1007/s12613-014-1020-8
Cite this article as:
Xian-hui Li, Qing-zhi Yan, Yong-jun Han, Mei-qi Cao, and Chang-chun Ge, Fabrication of solid-phase-sintered SiC-based composites with short carbon fibers, Int. J. Miner. Metall. Mater., 21(2014), No. 11, pp. 1141-1145. https://doi.org/10.1007/s12613-014-1020-8
Xian-hui Li, Qing-zhi Yan, Yong-jun Han, Mei-qi Cao, and Chang-chun Ge, Fabrication of solid-phase-sintered SiC-based composites with short carbon fibers, Int. J. Miner. Metall. Mater., 21(2014), No. 11, pp. 1141-1145. https://doi.org/10.1007/s12613-014-1020-8
Citation:
Xian-hui Li, Qing-zhi Yan, Yong-jun Han, Mei-qi Cao, and Chang-chun Ge, Fabrication of solid-phase-sintered SiC-based composites with short carbon fibers, Int. J. Miner. Metall. Mater., 21(2014), No. 11, pp. 1141-1145. https://doi.org/10.1007/s12613-014-1020-8
Solid-phase-sintered SiC-based composites with short carbon fibers (Csf/SSiC) in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure, density, and flexural strength of the composites with different Csf contents were investigated. SEM micrographs showed that the Csf distributed in the SSiC matrix homogeneously with some gaps at the fiber/matrix interfaces. The densities of the composites decreased with increasing Csf content. However, the bending strength first increased and then decreased with increasing Csf content, reaching a maximum value of 390 MPa at a Csf content of 5wt%, which was 60 MPa higher than that of SSiC because of the pull-out strengthening mechanism. Notably, Csf was graphitized and damaged during the sintering process because of the high temperature and reaction with boron derived from the sintering additive B4C; this graphitization degraded the fiber strengthening effect.
Solid-phase-sintered SiC-based composites with short carbon fibers (Csf/SSiC) in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure, density, and flexural strength of the composites with different Csf contents were investigated. SEM micrographs showed that the Csf distributed in the SSiC matrix homogeneously with some gaps at the fiber/matrix interfaces. The densities of the composites decreased with increasing Csf content. However, the bending strength first increased and then decreased with increasing Csf content, reaching a maximum value of 390 MPa at a Csf content of 5wt%, which was 60 MPa higher than that of SSiC because of the pull-out strengthening mechanism. Notably, Csf was graphitized and damaged during the sintering process because of the high temperature and reaction with boron derived from the sintering additive B4C; this graphitization degraded the fiber strengthening effect.
下载: