Xiang-feng Liang, Yu-tao Zhao, Zhi-hong Jia, and Chi Zhang, Preparation and tensile properties of DD5 single crystal castings, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 683-690. https://doi.org/10.1007/s12613-016-1281-5
Cite this article as:
Xiang-feng Liang, Yu-tao Zhao, Zhi-hong Jia, and Chi Zhang, Preparation and tensile properties of DD5 single crystal castings, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 683-690. https://doi.org/10.1007/s12613-016-1281-5
Xiang-feng Liang, Yu-tao Zhao, Zhi-hong Jia, and Chi Zhang, Preparation and tensile properties of DD5 single crystal castings, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 683-690. https://doi.org/10.1007/s12613-016-1281-5
Citation:
Xiang-feng Liang, Yu-tao Zhao, Zhi-hong Jia, and Chi Zhang, Preparation and tensile properties of DD5 single crystal castings, Int. J. Miner. Metall. Mater., 23(2016), No. 6, pp. 683-690. https://doi.org/10.1007/s12613-016-1281-5
The preparation procedure of DD5 single crystal castings was optimized. The microstructure characteristics of DD5 single crystal superalloy were investigated by microstructure observation and segregation behavior examination. The results show that the grain orientation is optimized by constraining the spiral crystallizer in [001] orientation and spatial scale. Also, the γ’ phase of inter-dendrites is larger and more irregular than that in dendrite arms. High temperature tensile tests of DD5 single crystal castings exhibit that the peak stress increases with increasing temperature, while the area reduction shows an opposite trend, when the temperature is below 800℃; meanwhile, when the temperature is between 800℃ and 1000℃, the fracture stress of the alloy is the same as the peak stress. The fracture mode changes from shear to ductile with increasing temperature from 600℃ and 1000℃.
The preparation procedure of DD5 single crystal castings was optimized. The microstructure characteristics of DD5 single crystal superalloy were investigated by microstructure observation and segregation behavior examination. The results show that the grain orientation is optimized by constraining the spiral crystallizer in [001] orientation and spatial scale. Also, the γ’ phase of inter-dendrites is larger and more irregular than that in dendrite arms. High temperature tensile tests of DD5 single crystal castings exhibit that the peak stress increases with increasing temperature, while the area reduction shows an opposite trend, when the temperature is below 800℃; meanwhile, when the temperature is between 800℃ and 1000℃, the fracture stress of the alloy is the same as the peak stress. The fracture mode changes from shear to ductile with increasing temperature from 600℃ and 1000℃.
下载: