Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

Dong-hui Liu; Hao Liu; Jian-liang Zhang; Zheng-jian Liu; Xun Xue; Guang-wei Wang; Qing-feng Kang

doi:10.1007/s12613-017-1487-1

Volume 24 Issue 9

Sep. 2017

Turn off MathJax

数据统计

计量

文章访问数: 479
HTML全文浏览量: 76
PDF下载量: 12
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2017 > 24(9): 991-998

Dong-hui Liu, Hao Liu, Jian-liang Zhang, Zheng-jian Liu, Xun Xue, Guang-wei Wang, and Qing-feng Kang, Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process, Int. J. Miner. Metall. Mater., 24(2017), No. 9, pp. 991-998. https://doi.org/10.1007/s12613-017-1487-1

Cite this article as:

Dong-hui Liu, Hao Liu, Jian-liang Zhang, Zheng-jian Liu, Xun Xue, Guang-wei Wang, and Qing-feng Kang, Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process, Int. J. Miner. Metall. Mater., 24(2017), No. 9, pp. 991-998. https://doi.org/10.1007/s12613-017-1487-1

Citation:

PDF( 4072 KB)

引用本文 PDF XML SpringerLink

研究论文Open Access

Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

School of Metallurgy and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
Xuanhua Iron & Steel Group Co. Ltd., Xuanhua 075100, China
Beijing Shenwu Environment & Energy Technology Co., Ltd., Beijing 102200, China

通讯作者:
Jian-liang Zhang E-mail: zhang.jianliang@hotmail.com

中文摘要

The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results show that the Ore-A exhibits good granulation properties, strong liquid flow capability, high bonding phase strength and crystal strength, but poor assimilability. With increasing Ore-A ratio, the tumbler index and the reduction index (RI) of the sinter first increase and then decrease, whereas the softening interval (∆T) and the softening start temperature (T_10%) of the sinter exhibit the opposite behavior; the reduction degradation index (RDI_+3.15) of the sinter increases linearly, but the sinter yield exhibits no obvious effects. With increasing Ore-A ratio, the distribution and crystallization of the minerals are improved, the main bonding phase first changes from silico-ferrite of calcium and aluminum (SFCA) to kirschsteinite, silicate, and SFCA and then transforms to 2CaO·SiO₂ and SFCA. Given the utilization of Ore-A and the improvement of the sinter properties, the Ore-A ratio in the high-limonite sintering process is suggested to be controlled at approximately 6wt%.

关键词:

Research ArticleOpen Access

Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

+ Author Affiliations

Abstract

Abstract

The basic characteristics of Australian iron ore concentrate (Ore-A) and its effects on sinter properties during a high-limonite sintering process were studied using micro-sinter and sinter pot methods. The results show that the Ore-A exhibits good granulation properties, strong liquid flow capability, high bonding phase strength and crystal strength, but poor assimilability. With increasing Ore-A ratio, the tumbler index and the reduction index (RI) of the sinter first increase and then decrease, whereas the softening interval (∆T) and the softening start temperature (T_10%) of the sinter exhibit the opposite behavior; the reduction degradation index (RDI_+3.15) of the sinter increases linearly, but the sinter yield exhibits no obvious effects. With increasing Ore-A ratio, the distribution and crystallization of the minerals are improved, the main bonding phase first changes from silico-ferrite of calcium and aluminum (SFCA) to kirschsteinite, silicate, and SFCA and then transforms to 2CaO·SiO₂ and SFCA. Given the utilization of Ore-A and the improvement of the sinter properties, the Ore-A ratio in the high-limonite sintering process is suggested to be controlled at approximately 6wt%.
- iron ore concentrate;
- limonite;
- basic characteristics;
- sinter properties;
- sintering process

FullText(HTML)

Supplements(0)

References(17)

References

[1]	Z.W. Peng, D. Gregurek, and C. Wenzl, Sustainability in metallurgy, JOM, 67(2015), No. 9, p. 1931.
[2]	S.L. Wu, G.L. Zhang, S.G. Chen, and B. Su, Influencing factors and effects of assimilation characteristic of iron ores in sintering process, ISIJ Int., 54(2014), No. 3, p. 582.
[3]	D.H. Liu, J.L. Zhang, Z.J. Liu, Y.Z. Wang, X. Xue, and J. Yan, Effects of iron sand ratios on the basic characteristics of vanadium titanium mixed ores, JOM, 68(2016), No. 9, p. 2418.
[4]	J. Zhu, S.L. Wu, J.X. Fan, G.L. Zhang, and Z.G. Que, Effect of the separation of large limonite ore particles in the granulation process of sinter raw materials, ISIJ Int., 53(2013), No. 9, p. 1529.
[5]	F.Z. Chen and J.B. Sun, Current development situation on technology for limonite-sintering at home and analysis on its influence factors, Angang Technol., 4(2015), No. 4, p. 8.
[6]	J.J. Dong, G. Wang, Y.G. Gong, Q.G. Xue, and J.S. Wang, Effect of high alumina iron ore of gibbsite type on sintering performance, Ironmaking Steelmaking, 42(2015), No. 1, p. 30.
[7]	S.L. Wu and G.L. Zhang, Liquid absorbability of iron ores and large limonite particle divided adding technology in the sintering process, Steel Res. Int., 86(2015), No. 9, p. 1014.
[8]	D.H. Liu, J.L. Zhang, Z.J. Liu, K.J. Li, Y.Z. Wang, and G.W. Wang, Effects of liquid infiltration characteristics of iron ores with a high proportion of limonite on sinter strength, Metall. Res. Technol., 113(2016), No. 3, p. 301.
[9]	S.L. Wu, Y.M. Dai, D. Oliveira, Y.D. Pei, J. Xu, and H.L. Han, Optimization of ore blending during sintering based on complementation of high temperature properties, J. Univ. Sci. Technol. Beijing, 32(2010), No. 6, p. 719.
[10]	M. Zhou, T. Jiang, S.T. Yang, and X.X. Xue, Vanadium-titanium magnetite ore blend optimization for sinter strength based on iron ore basic sintering characteristics, Int. J. Miner. Process., 142(2010), p. 125.
[11]	T. Maeda, R. Kikuchi, K. Ohno, M. Shimizu, and K. Kunitomo, Effect of particle size of iron ore and coke on granulation property of quasi-particle, ISIJ Int., 53(2013), No. 9, p. 1503.
[12]	G.W. Zhang, L.J. Tong, Y. Yao, and Z.L. Li, Study on process mineralogy of Australian magnetite concentrate, China Min. Mag., 25(2016), No. 3, p. 107.
[13]	Z.C. Huang, Z.G. Han, J.W. Zhou, T.Q. Jiang, and X.P. Yang, Influence of MgO on microstructure of fine magnetite concentrate based sinter, Iron Steel, 40(2005), No. 9, p. 16.
[14]	D.Q. Zhu, T.J. Chun, J. Pan, L.M. Lu, and Z. He, Upgrading and dephosphorization of Western Australian iron ore using reduction roasting by adding sodium carbonate, Int. J. Miner. Metall. Mater., 20(2013), No. 6, p. 505.
[15]	S.L. Wu, J. Zhu, J.X. Fan, G.L. Zhang, and S.G. Chen, Sintering behavior of return fines and their effective utilization method, ISIJ Int., 53(2013), No. 9, p. 1561.
[16]	G.L. Zhang, S.L. Wu, S.L. Chen, J. Zhu, J.X. Fan, and B. Su, Optimization of dolomite usage in iron ore sintering process, ISIJ Int., 53(2013), No. 9, p. 1515.
[17]	B. Phillips and A. Muan, Phase equilibria in the system CaO-iron oxide-SiO₂ in air, J. Am. Ceram. Soc., 42(1959), No. 9, p. 413.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

中文摘要

Basic characteristics of Australian iron ore concentrate and its effects on sinter properties during the high-limonite sintering process

Abstract

References

数据统计

Catalog