留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 24 Issue 10
Oct.  2017
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  612
  • HTML全文浏览量:  119
  • PDF下载量:  31
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2017  >  24(10): 1125-1133
M. L. Saucedo-Muñoz, A. Ortiz-Mariscal, V. M. Lopez-Hirata, J. D. Villegas-Cardenas, Orlando Soriano-Vargas, and Erika O. Avila-Davila, Precipitation analysis of as-cast HK40 steel after isothermal aging, Int. J. Miner. Metall. Mater., 24(2017), No. 10, pp. 1125-1133. https://doi.org/10.1007/s12613-017-1503-5
Cite this article as:
M. L. Saucedo-Muñoz, A. Ortiz-Mariscal, V. M. Lopez-Hirata, J. D. Villegas-Cardenas, Orlando Soriano-Vargas, and Erika O. Avila-Davila, Precipitation analysis of as-cast HK40 steel after isothermal aging, Int. J. Miner. Metall. Mater., 24(2017), No. 10, pp. 1125-1133. https://doi.org/10.1007/s12613-017-1503-5
shu
引用本文 PDF XML SpringerLink
研究论文

Precipitation analysis of as-cast HK40 steel after isothermal aging

  • Instituto Politecnico Nacional (ESIQIE), Apdo. Postal 118-395, Mexico, D.F. 07300

  • Universidad Politecnica, Metepec y Tultitlan Edo. Mex., Mexico

  • Tecnológico de Estudios Superiores de Jocotitlan, Jocotitlan, Edo. Mex., Mexico

  • 通讯作者:

    V. M. Lopez-Hirata    E-mail: vlopezhi@prodigy.net.mx

  • As-cast HK40 steel was aged at 700, 800, or 900℃ for times as long as 2000 h. Microstructural characterization showed that the primary M7C3 carbide network contained a substantial content of manganese, in agreement with the microsegregation of manganese calculated by Thermo-Calc using the Scheil-Gulliver module. The dissolution of primary carbides caused the solute supersaturation of austenite and subsequent precipitation of fine M23C6 carbides in the austenite matrix for aged specimens. During prolonged aging, the carbide size increased with increasing time because of the coarsening process. A time-temperature-precipitation diagram for M23C6 carbides was calculated using the Thermo-Calc PRISMA software; this diagram showed good agreement with the experimental growth kinetics of precipitation. The fine carbide precipitation caused an increase in hardness; however, the coarsening process of carbides promoted a decrease in hardness. Nanoindentation tests of the austenite matrix indicated an increase in ductility with increasing aging time.
    • Research Article

    Precipitation analysis of as-cast HK40 steel after isothermal aging

    + Author Affiliations
      Abstract
    • As-cast HK40 steel was aged at 700, 800, or 900℃ for times as long as 2000 h. Microstructural characterization showed that the primary M7C3 carbide network contained a substantial content of manganese, in agreement with the microsegregation of manganese calculated by Thermo-Calc using the Scheil-Gulliver module. The dissolution of primary carbides caused the solute supersaturation of austenite and subsequent precipitation of fine M23C6 carbides in the austenite matrix for aged specimens. During prolonged aging, the carbide size increased with increasing time because of the coarsening process. A time-temperature-precipitation diagram for M23C6 carbides was calculated using the Thermo-Calc PRISMA software; this diagram showed good agreement with the experimental growth kinetics of precipitation. The fine carbide precipitation caused an increase in hardness; however, the coarsening process of carbides promoted a decrease in hardness. Nanoindentation tests of the austenite matrix indicated an increase in ductility with increasing aging time.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(18)
    • [1]
      A.A. Kaya, P. Krauklis, and D.J. Young, Microstructure of HK40 alloy after high temperature service in oxidizing/carburizing environment:I. Oxidation phenomena and propagation of a crack, Mater. Charact., 49(2002), No. 1, p. 11.
      [2]
      J.W. Liu, D.L. Jiao, and C.P. Luo, Microstructural evolution in austenitic heat-resistant cast steel 35Cr25Ni12NNbRE during long-term service, Mater. Sci. Eng. A, 527(2010), No. 10-11, p. 2772.
      [3]
      S. Haro R., D. Lopez L., A. Velasco T. and R. Viramontes B., Microstructural factors that determine the weldability of a high Cr-high Si HK40 alloy, Mater. Chem. Phys., 66(2000), No. 1, p. 90.
      [4]
      A.M. Babakr, A.A. Al-Ahmrai, K. Al-Jumayiah, and F. Habiby, Failure investigation of a furnace tube support, J. Fail. Anal. Prev., 9(2009), No. 1, p. 16.
      [5]
      A.A. Kaya, Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment:Ⅱ. Carburization and carbide transformations, Mater. Charact., 49(2002), No. 1, p. 23.
      [6]
      ASTM Standard, ASTM A351/A351M-03, Standard Specification for Casting, Austenitic, Austenitic-Ferritic (duplex), for Pressure-Containing Parts, ASTM, 2004.
      [7]
      O. Coreño-Alonso, A. Duffus-Scott, C. Zánchez-Cornejo, J. Coreño-Alonso, F. Sánchez-de Jesús, and A. Bolarín-Miró, On the effect of σ-phase formation during metal dusting, Mater. Chem. Phys., 84(2004), No. 1, p. 20.
      [8]
      L.H. de Almeaida, A.F. Ribeiro, and L.L. May, Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes, Mater. Charact., 49(2003), No. 3, p. 219.
      [9]
      M. Whittaker, B. Wilshire, and J. Brear, Creep fracture of the centrifugally-cast superaustenitic steels, HK40 and HP40, Mater. Sci. Eng. A, 580(2013), No. 9, p. 391.
      [10]
      J.O. Andersson, T. Helander, L. Höglund, P.F. Shi, and B. Sundman, Thermo-Calc&DICTRA, computational tools for materials science, Calphad, 26(2002), No. 2, p. 273.
      [11]
      Thermo-Calc Prisma software[tcfe7.tdb and mobFe2.ddb data] version 2016b, Sweden, 2016.
      [12]
      G. Kostorz, Phase Transformations in Materials, Wiley-VCH, Germany, 2001, p. 311.
      [13]
      W.C. Oliver and G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 7(1992), No. 6, p. 1564.
      [14]
      ASTM Standard, ASTM E18-02, Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials, ASTM, 2004.
      [15]
      Thermo-Calc software[tcfe7.tdb data] version 2016b, Sweden. 2016.
      [16]
      T. Sourmail, Precipitation in creep resistant austenitic stainless steels, Mater. Sci. Technol., 17(2001), No. 1, p. 1.
      [17]
      G.R. Kegg and J.M. Silcock, The shape of M23C6 particles, Scripta Metall., 6(1972), No. 11, p. 1083.
      [18]
      K.G.F. Janssens, D. Raabe, E. Kozeschnik, M.A. Miodownik, and B. Nestler, Computational Material Engineering, Elsevier, UK, 2007, p. 179.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计