Reinforcing effect of graphene on the mechanical properties of Al<sub>2</sub>O<sub>3</sub>/TiC ceramics

Zuo-li Li; Jun Zhao; Jia-lin Sun; Feng Gong; Xiu-ying Ni

doi:10.1007/s12613-017-1533-z

Volume 24 Issue 12

Dec. 2017

Turn off MathJax

数据统计

计量

文章访问数: 448
HTML全文浏览量: 66
PDF下载量: 11
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2017 > 24(12): 1403-1411

Zuo-li Li, Jun Zhao, Jia-lin Sun, Feng Gong, and Xiu-ying Ni, Reinforcing effect of graphene on the mechanical properties of Al₂O₃/TiC ceramics, Int. J. Miner. Metall. Mater., 24(2017), No. 12, pp. 1403-1411. https://doi.org/10.1007/s12613-017-1533-z

Cite this article as:

Zuo-li Li, Jun Zhao, Jia-lin Sun, Feng Gong, and Xiu-ying Ni, Reinforcing effect of graphene on the mechanical properties of Al2O3/TiC ceramics, Int. J. Miner. Metall. Mater., 24(2017), No. 12, pp. 1403-1411. https://doi.org/10.1007/s12613-017-1533-z

Citation:

PDF( 6892 KB)

引用本文 PDF XML SpringerLink

研究论文

Reinforcing effect of graphene on the mechanical properties of Al₂O₃/TiC ceramics

Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan 250061, China

通讯作者:
Jun Zhao E-mail: zhaojun@sdu.edu.cn

中文摘要

Multilayer graphene (MLG)-reinforced Al₂O₃/TiC ceramics were fabricated through hot pressing sintering, and the reinforcing effect of MLG on the microstructure and mechanical properties of the composites was investigated by experiment and simulation. The simulation of dynamic crack initiation and propagation was investigated based on the cohesive zone method. The results show that the composite added with 0.2wt% MLG has excellent flexural strength and high fracture toughness. The major reinforcing mechanisms are the synergistic effect by strong and weak bonding interfaces, MLG pull-out, and grain refinement resulting from the addition of MLG. In addition, the aggravating of crack deflection, branching, blunting, and bridging have indispensable contribution to the improvement of the as-designed materials.

关键词:

Research Article

Reinforcing effect of graphene on the mechanical properties of Al₂O₃/TiC ceramics

+ Author Affiliations

Abstract

Abstract

Multilayer graphene (MLG)-reinforced Al₂O₃/TiC ceramics were fabricated through hot pressing sintering, and the reinforcing effect of MLG on the microstructure and mechanical properties of the composites was investigated by experiment and simulation. The simulation of dynamic crack initiation and propagation was investigated based on the cohesive zone method. The results show that the composite added with 0.2wt% MLG has excellent flexural strength and high fracture toughness. The major reinforcing mechanisms are the synergistic effect by strong and weak bonding interfaces, MLG pull-out, and grain refinement resulting from the addition of MLG. In addition, the aggravating of crack deflection, branching, blunting, and bridging have indispensable contribution to the improvement of the as-designed materials.
- mechanical properties;
- ceramics;
- graphene;
- simulation;
- interface

FullText(HTML)

Supplements(0)

References(32)

References

[1]	K. Zimmermann, G.A. Schneider, A.K. Bhattacharya, and W. Hintze, Surface modification of Al₂O₃/TiC cutting ceramics, J. Am. Ceram. Soc., 90(2007), No. 12, p. 3773.
[2]	Y.H. Fei, C.Z. Huang, H.L. Liu, and B. Zhou, Mechanical properties of Al₂O₃-TiC-TiN ceramic tool materials, Ceram. Int., 40(2014), No. 7, p. 10205.
[3]	K.F. Cai, D.S. Mclachlan, N. Axen, and R. Manyatsa, Preparation, microstructures and properties of Al₂O₃-TiC composites, Ceram. Int., 28(2002), No. 2, p. 217.
[4]	W.H. Tuan, R.Z. Chen, T.C. Wang, C.H. Cheng, and P.S. Kuo, Mechanical properties of Al₂O₃/ZrO₂ composites, J. Eur. Ceram. Soc., 22(2002), No. 16, p. 2827.
[5]	S.X. Song, X. Ai, J. Zhao, and Q. Wu, Mechanical properties toughening and strengthening mechanisms of Al₂O₃/TiC nanocomposite, Mater. Mech. Eng., 27(2003), No. 12, p. 35.
[6]	Z.B. Yin, C.Z. Huang, B. Zou, H.L. Liu, H.T. Zhu, and J. Wang, Preparation and characterization of Al₂O₃/TiC micro-nano-composite ceramic tool materials, Ceram. Int., 39(2013), No. 4, p. 4253.
[7]	M.H. Bocanegra-Bernal, J. Echeberria, J. Ollo, A. Garcia-Reyes, C. Domínguez-Rios, A. Reyes-Rojas, and A. Aguilar-Elguezabal, A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites, Carbon, 49(2011), No. 5, p. 1599.
[8]	P. Michelis and J. Vlachopoulos, Complete CNT disentanglement-dispersion-functionalisation in a pulsating micro-structured reactor, Chem. Eng. Sci., 90(2013), No. 10, p. 10.
[9]	H. Porwal, S. Grasso, and M.J. Reece, Review of graphene-ceramic matrix composites, Adv. Appl. Ceram., 112(2013), No. 8, p. 443.
[10]	X. Jiang and L.T. Drzal, Multifunctional high density polyethylene nanocomposites produced by incorporation of exfoliated graphite nanoplatelets 1:Morphology and mechanical properties, Polym. Compos., 31(2009), No. 6, p. 1091.
[11]	A. Bianco, H.M. Cheng, T. Enoki, Y. Gogotsi, R.H. Hurt, N. Koratkar, T. Kyotani, M. Monthioux, C.R. Park, J.M.D. Tascon, and J. Zhang, All in the graphene family-A recommended nomenclature for two-dimensional carbon materials, Carbon, 65(2013), No. 6, p. 1.
[12]	J. Liu, H.X. Yan, and K. Jiang, Mechanical properties of graphene platelet-reinforced alumina ceramic composites, Ceram. Int., 39(2013), No. 6, p. 6215.
[13]	W. Kim, H.S. Oh, and I.J. Shon, The effect of graphene reinforcement on the mechanical properties of Al₂O₃ ceramics rapidly sintered by high-frequency induction heating, Int. J. Refract. Met. Hard Mater., 48(2015), p. 376.
[14]	Y. Fan, M. Estili, G. Igarashi, W. Jiang, and A. Kawasaki, The effect of homogeneously dispersed few-layer graphene on microstructure and mechanical properties of Al₂O₃ nanocomposites, J. Eur. Ceram. Soc., 34(2014), No. 2, p. 443.
[15]	H. Porwal, P. Tatarko, S. Grasso, J. Khaliq, I. Dlouhý, and M.J. Reece, Graphene reinforced alumina nano-composites, Carbon, 64(2013), No. 11, p. 359.
[16]	P. Kun, O. Tapasztó, F. Wéber, and C. Balázsi, Determination of structural and mechanical properties of multilayer graphene added silicon nitride-based composites, Ceram. Int., 38(2012), No. 1, p. 211.
[17]	K. Jiang, J. Li, and J. Liu, Spark plasma sintering and characterization of graphene platelet/ceramic composites, Adv. Eng. Mater., 17(2015), No. 5, p. 716.
[18]	Y. Cheng, Y. Zhang, T.Y. Wan, Z.B. Yin, and J.A. Wang, Mechanical properties and toughening mechanisms of graphene platelets reinforced Al₂O₃/TiC composite ceramic tool materials by microwave sintering, Mater. Sci. Eng. A, 680(2017), p. 190.
[19]	J. Liu, H.X. Yan, M.J. Reece, and K. Jiang, Toughening of zirconia/alumina composites by the addition of graphene platelets, J. Eur. Ceram. Soc., 32(2012), No. 16, p. 4185.
[20]	C. Ramirez and M.I. Osendi, Toughening in ceramics containing graphene fillers, Ceram. Int., 40(2014), No. 7, p. 11187.
[21]	M. Sebastiani, K.E. Johanns, E.G. Herbert, and G.M. Pharr, Measurement of fracture toughness by nanoindentation methods:recent advances and future challenges, Curr. Opin. Solid State Mater. Sci., 19(2015), No. 6, p. 324.
[22]	I. Benedetti and M.H. Aliabadi, A three-dimensional cohesive-frictional grain-boundary micromechanical model for intergranular degradation and failure in polycrystalline materials, Comput. Methods Appl. Mech. Eng., 265(2013), No. 9, p. 36.
[23]	M.L. Bauccio, ASM Engineered Materials Reference Book, 2nd Ed, Ohio:ASM international, 1994.
[24]	C.G. Lee, X.D. Wei, J.W. Kysar, and J. Hone, Measurement of the elastic properties and intrinsic strength of monolayer graphene, Science, 321(2008), No. 5887, p. 385.
[25]	P. Zhang, L.L. Ma, F.F. Fan, Z. Zeng, C. Peng, P.E. Loya, Z. Liu, Y.J. Gong, J.N. Zhang, X.X. Zhang, P.M. Ajayan, T. Zhu, and J. Lou, Fracture toughness of graphene, Nat. Commun., 5(2014), No. 4, p. 3782.
[26]	J.S. Zhao, Preparation and Properties of Al₂O₃/TiC/CNTs Composites[Dissertation], Shandong Jianzhu University, Jinan, 2012, p. 21.
[27]	S.G. Nyembe, Improvement of Alumina Mechanical and Electrical Properties using Multi-Walled Carbon Nanotubes and Titanium Carbide as a Secondary Phase[Dissertation], University of Witwatersrand, Johannesburg, 2013, p. 80.
[28]	M. Kostecki, M. Grybczuk, P. Klimczyk, T. Cygan, J. Woźniak, T. Wejrzanowski, L. Jaworska, J. Morgiel, and A. Olszyna, Structural and mechanical aspects of multilayer graphene addition in alumina matrix composites-validation of computer simulation model, J. Eur. Ceram. Soc., 36(2016), No.16, p. 4171.
[29]	R. Rao, R. Podila, R. Tsuchikawa, J. Katochet, D. Tishler, A.M. Rao, and M. Ishigami, Effects of layer stacking on the combination Raman modes in graphene, ACS Nano, 5(2011), No. 3, p. 1594.
[30]	X.L. Meng, C.H. Xu, G.C. Xiao, M.D. Yi, and Y.B. Zhang, Microstructure and anisotropy of mechanical properties of graphene nanoplate toughened Al₂O₃-based ceramic composite, Ceram. Int., 42(2016), No. 14, p. 16090.
[31]	Y. Ji and J.A. Yeomans, Processing and mechanical properties of Al₂O₃-5vol% Cr nanocomposites, J. Eur. Ceram. Soc., 22(2002), No. 12, p. 1927.
[32]	N. Claussen and J. Steeb, Toughening of ceramic composites by oriented nucleation of microcracks, J. Am. Ceram. Soc., 59(1976), No. 9-10, p. 457.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Reinforcing effect of graphene on the mechanical properties of Al₂O₃/TiC ceramics

中文摘要

Reinforcing effect of graphene on the mechanical properties of Al₂O₃/TiC ceramics

Abstract

References

数据统计

Catalog