留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 25 Issue 2
Feb.  2018
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  425
  • HTML全文浏览量:  64
  • PDF下载量:  20
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2018  >  25(2): 153-163
Yi-hong Li, Yan-ping Bao, Rui Wang, Li-feng Ma, and Jian-sheng Liu, Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process, Int. J. Miner. Metall. Mater., 25(2018), No. 2, pp. 153-163. https://doi.org/10.1007/s12613-018-1558-y
Cite this article as:
Yi-hong Li, Yan-ping Bao, Rui Wang, Li-feng Ma, and Jian-sheng Liu, Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process, Int. J. Miner. Metall. Mater., 25(2018), No. 2, pp. 153-163. https://doi.org/10.1007/s12613-018-1558-y
shu
引用本文 PDF XML SpringerLink
研究论文

Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process

  • Collaborative Innovation Centre of Taiyuan Heavy Machinery Equipment and School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China

  • State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China

  • School of Materials Science and Engineering, North University of China, Taiyuan 030024, China

  • 通讯作者:

    Yi-hong Li    E-mail: mm.liyh@163.com

  • A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber:boiling pattern (BP), transition pattern (TP), and wave pattern (WP). The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.
    • Research Article

    Modeling study on the flow patterns of gas-liquid flow for fast decarburization during the RH process

    + Author Affiliations
      Abstract
    • A water model and a high-speed video camera were utilized in the 300-t RH equipment to study the effect of steel flow patterns in a vacuum chamber on fast decarburization and a superior flow-pattern map was obtained during the practical RH process. There are three flow patterns with different bubbling characteristics and steel surface states in the vacuum chamber:boiling pattern (BP), transition pattern (TP), and wave pattern (WP). The effect of the liquid-steel level and the residence time of the steel in the chamber on flow patterns and decarburization reaction were investigated, respectively. The liquid-steel level significantly affected the flow-pattern transition from BP to WP, and the residence time and reaction area were crucial to evaluate the whole decarburization process rather than the circulation flow rate and mixing time. A superior flow-pattern map during the practical RH process showed that the steel flow pattern changed from BP to TP quickly, and then remained as TP until the end of decarburization.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(32)
    • [1]
      Y. Fukuda, S. Onoyama, T. Imai, S. Mukawa, T. Sado, K. Fukiage, O. Kunitake, N. Takagi, and H. Matsumoto, Development of high-grade steel manufacturing technology for mass production at Nagoya works, Nippon Steel Tech. Rep., 2013, No. 104, p. 90.
      [2]
      Y.H. Li, Y.P. Bao, R. Wang, M. Wang, Q.X. Huang, and Y.G. Li, Modeling on liquid level and bubble behavior in vacuum chamber of RH process, J. Iron Steel Res. Int., 23(2016), No. 4, p. 305.
      [3]
      Y.H. Li, Y.P. Bao, M. Wang, R. Wang, and D.C. Tang, Influence of process conditions during Ruhrstahl-Hereaeus refining process and effect of vacuum degassing on carbon removal to ultra-low levels, Ironmaking Steelmaking, 42(2015), No. 5, p. 366.
      [4]
      D.Q. Geng, J.X. Zheng, K. Wang, P. Wang, R.Q. Liang, H.T. Liu, H. Lei, and J.C. He, Simulation on decarburization and inclusion removal process in the Ruhrstahl-Heraeus (RH) process with ladle bottom blowing, Metall. Mater. Trans. B, 46(2015), No. 3, p. 1484.
      [5]
      L.J. Luo, J.Q. Yuan, P. Xie, J.W. Sun, and W. Guo, Hydrodynamics and mass transfer characteristics in an internal loop airlift reactor with sieve plates, Chem. Eng. Res. Des., 91(2013), No. 12, p. 2377.
      [6]
      T.T. Xu, X.D. Jiang, N. Yang, and J.H. Zhu, CFD simulation of internal-loop airlift reactor using EMMS drag model, Particuology, 19(2015), No. 2, p. 124.
      [7]
      C. Kamata and K. Ito, Cold model experiments on the application of gas lift pump to the transportation of molten metal, ISIJ Int., 35(1995), No. 7, p. 859.
      [8]
      J. Yue, G.W. Chen, Q. Yuan, L.G. Luo, and Y. Gonthier, Hydrodynamics and mass transfer characteristics in gas-liquid flow through a rectangular microchannel, Chem. Eng. Sci., 62(2007), No. 7, p. 2096.
      [9]
      M.K. Mondal, N. Maruoka, S. Kitamura, G.S. Gupta, H. Nogami, and H.Shibata, Study of fluid flow and mixing behavior of a vacuum degasser, Trans. Indian Inst. Met., 65(2012), No. 3, p. 321.
      [10]
      L.F. Zhang and F. Li, Investigation on the fluid flow and mixing phenomena in a Ruhrstahl-Heraeus (RH) steel degasser using physical modeling, JOM, 66(2014), No. 7, p. 1227.
      [11]
      B.H. Zhu, Q.C. Liu, D. Zhao, S. Ren, M.R. Xu, B.C. Yang, and B. Hu, Effect of nozzle blockage on circulation flow rate in up-snorkel during the RH degasser process, Steel Res. Int., 87(2016), No. 2, p. 136.
      [12]
      D. Mukherjee, A.K. Shukla, and D.G. Senk, Cold model-based investigations to study the effects of operational and nonoperational parameters on the Ruhrstahl-Heraeus degassing process, Metall. Mater. Trans. B, 48(2017), No. 2, p. 763.
      [13]
      Y. Kato, H. Nakato, T. FJii, S. Ohmiya, and S. Takatori, Fluid flow in ladle and its effect on decarburization rate in RH degasser, ISIJ Int., 33(1993), No. 10, p. 1088.
      [14]
      Q.X. Rui, F. Jiang, Z.M. Ma, Z.M. You, G.G. Cheng, and J. Zhan, Effect of elliptical snorkel on the decarburization rate in single snorkel refining furnace, Steel Res. Int., 84(2013), No. 2, p. 192.
      [15]
      D. Guo and G.A. Irons, Modeling of gas-liquid reactions in ladle metallurgy:Part I. Physical modelling, Metall. Mater. Trans. B, 31(2000), No. 6, p. 1447.
      [16]
      L. Neves, H.P.O. de Oliveria, and R.P. Tavares, Evaluation of the effects of gas in the vacuum chamber of a RH degasser on melt circulation and decarburization rates, ISIJ Int., 49(2009), No. 8, p. 1141.
      [17]
      S. Inada and T. Watanabe, A study of the effects of CO2 absorption in the NaOH solution-CO2 gas jet model, Tetsu-to-Hagané, 62(1976), No. 7, p. 807.
      [18]
      S.H. Kim and R.J. Fruehan, Physical modeling of liquid/liquid mass transfer in a gas stirred ladle, Metall. Trans. B, 18(1987), No. 2, p. 381.
      [19]
      L.J. Luo, F.N. Liu, Y.Y. Xu, and J.Q. Yuan, Hydrodynamics and mass transfer characteristics in an internal loop airlift reactor with different spargers, Chem. Eng. J., 175(2011), No. 1, p. 494.
      [20]
      Y.X. Guo, M.N. Rathor, and H.C. Ti, Hydrodynamics and mass transfer studies in a novel external-loop airlift reactor, Chem. Eng. J., 67(1997), No. 3, p. 205.
      [21]
      L. Lin, Y.P. Bao, F. Yue, L.Q. Zhang, and H.L. Ou, Physical model of fluid flow characteristics in RH-TOP vacuum refining process, Int. J. Miner. Metall. Mater., 19(2012), No. 6, p. 483.
      [22]
      F. Ahrenhold and W. Pluschkell, Circulation rate of liquid steel in RH degassers, Steel Res., 69(1998), No. 2, p. 54.
      [23]
      X.G. Ai, Y.P. Bao, W. Jiang, and J.H. Liu, P.H. Li, and T.Q. Li, Periodic flow characteristics during RH vacuum circulation refining, Int. J. Miner. Metall. Mater., 17(2010), No. 1, p. 17.
      [24]
      J.H. Wei, N.W. Yu, Y.Y. Fan, S.L. Yang, J.C. Ma, and D.P. Zhu, Study on flow and mixing characteristics of molten steel in RH and RH-KTB refining processes, J. Shanghai Univ., 6(2002), No. 2, p. 167.
      [25]
      N. Bendjaballah, H. Dhaouadi, S. Poncin, N. Midoux, J.M. Hornut, and G. Wild, Hydrodynamics and flow regimes in external loop airlift reactors, Chem. Eng. Sci., 54(1999), No. 21, p. 5211.
      [26]
      M.H. Siegel, J.C. Merchuk, and K. Schugerl, Air-lift reactor analysis:Interrelationships between riser, downcomer, and gas-liquid separator behavior, including gas recirculation effects, AIChE J., 32(1986), No. 10, p. 1585.
      [27]
      J.C. Merchuk, N. Ladwa, A. Cameron, M. Bumler, and A. Pickett, Concentric-tube airlift reactors:effect of geometrical design on performance, AIChE J., 40(1994), No. 7, p. 1105.
      [28]
      X.H. Huang and J.Z. Li, Principles of Steel Metallurgy, Metallurgical Industry Press, Beijing, 2013, p. 497.
      [29]
      S.Y. Kitamura, H. Aoki, K.I. Miyamoto, H. Furuta, K. Yamashita, and K. Yonezawa, Development of a novel degassing process consisting with single large immersion snorkel and a bottom bubbling ladle, ISIJ Int., 40(2000), No. 5, p. 455.
      [30]
      N. Maruoka, F. Lazuardi, H. Nogami, G.S. Gupta, and S.Y. Kitamura, Effect of bottom bubbling conditions on surface reaction rate in oxygen-water system, ISIJ Int., 50(2010), No. 1, p. 89.
      [31]
      M. Takahashi, H. Matsumoto, and T. Saito, The mechanism of decarburization in RH degasser, ISIJ Int., 35(1995), No. 12, p. 1452.
      [32]
      T. Kitamura, K. Miyamoto, R. Tsujno, S. Mizoguch, and K. Kato, Mathematical model for nitrogen desorption and decarburization reaction in vacuum degasser, ISIJ Int., 36(1996), No. 4, p. 395.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计