留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 25 Issue 2
Feb.  2018
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  559
  • HTML全文浏览量:  86
  • PDF下载量:  20
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2018  >  25(2): 199-215
Monideepa Mukherjee, Sumit Tiwari, and Basudev Bhattacharya, Evaluation of factors affecting the edge formability of two hot rolled multiphase steels, Int. J. Miner. Metall. Mater., 25(2018), No. 2, pp. 199-215. https://doi.org/10.1007/s12613-018-1563-1
Cite this article as:
Monideepa Mukherjee, Sumit Tiwari, and Basudev Bhattacharya, Evaluation of factors affecting the edge formability of two hot rolled multiphase steels, Int. J. Miner. Metall. Mater., 25(2018), No. 2, pp. 199-215. https://doi.org/10.1007/s12613-018-1563-1
shu
引用本文 PDF XML SpringerLink
研究论文

Evaluation of factors affecting the edge formability of two hot rolled multiphase steels

  • Research and Development, TATA STEEL, Jamshedpur 831001, India

  • PSG College of Technology, Coimbatore 641004, India

  • 通讯作者:

    Monideepa Mukherjee    E-mail: monideepa@tatasteel.com

  • In this study, the effect of various factors on the hole expansion ratio and hence on the edge formability of two hot rolled multiphase steels, one with a ferrite-martensite microstructure and the other with a ferrite-bainite microstructure, was investigated through systematic microstructural and mechanical characterization. The study revealed that the microstructure of the steels, which determines their strain hardening capacity and fracture resistance, is the principal factor controlling edge formability. The influence of other factors such as tensile strength, ductility, anisotropy, and thickness, though present, are secondary. A critical evaluation of the available empirical models for hole expansion ratio prediction is also presented.
    • Research Article

    Evaluation of factors affecting the edge formability of two hot rolled multiphase steels

    + Author Affiliations
      Abstract
    • In this study, the effect of various factors on the hole expansion ratio and hence on the edge formability of two hot rolled multiphase steels, one with a ferrite-martensite microstructure and the other with a ferrite-bainite microstructure, was investigated through systematic microstructural and mechanical characterization. The study revealed that the microstructure of the steels, which determines their strain hardening capacity and fracture resistance, is the principal factor controlling edge formability. The influence of other factors such as tensile strength, ductility, anisotropy, and thickness, though present, are secondary. A critical evaluation of the available empirical models for hole expansion ratio prediction is also presented.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(36)
    • [1]
      M. Takahashi, O. Kawano, T. Hayashida, R. Okamoto, and H. Taniguchi, High strength hot-rolled steel sheets for automobiles, Nippon Steel Tech. Rep., 88(2003), p. 8.
      [2]
      D.A. Smith, Forming Flanges and Process Limitations, Smith & Associates, Michigan, 2005, p. 1.
      [3]
      R.R. Hilsen, T.E. Fine, and G.J. Hansen, Stamping potential of hot-rolled, columbium-bearing high-strength steels,[in] Microalloying 75:Proceedings of an International Symposium on High-strength Low-alloy steels, Washington D.C., 1977, p. 654.
      [4]
      R.G. Davies, Edge cracking in high strength steels, J. Appl. Metalwork., 2(1983), No. 4, p. 293.
      [5]
      R.D. Adamczyk and G.M. Michal, Sheared edge extension of high-strength cold-rolled steels, J. Appl. Metalwork., 4(1986), p. 157.
      [6]
      R.D.K. Misra, S.W. Thompson, T.A. Hylton, and A.J. Boucek, Microstructures of hot-rolled high-strength steels with significant differences in edge formability, Metall. Mater. Trans. A, 32(2001), No. 13, p. 745.
      [7]
      X. Fang, Z. Fan, B. Ralph, P. Evans, and R. Underhill, The relationships between tensile properties and hole expansion property of C-Mn steels, J. Mater. Process. Technol., 132(2003), No. 1-3, p. 215.
      [8]
      K. Hasegawa, K. Kawamura, T. Urabe, and Y. Hosoya, Effects of microstructure on stretch-flange-formability of 980 MPa grade cold-rolled ultra high strength steel sheets, ISIJ Int., 44(2004), No. 3, p. 603.
      [9]
      R.J. Comstock, D.K. Scherrer, and R.D. Adamczyk, Hole expansion in a variety of sheet steels, J. Mater. Eng. Perform., 15(2006), No. 6, p. 675.
      [10]
      A. Karelova, C. Krempaszky, E. Werner, P. Tsipouridis, T. Hebesberger, and A. Pichler, Hole expansion of dual-phase and complex-phase AHS steels-effect of edge conditions, Steel Res. Int., 80(2009), No. 1, p. 71.
      [11]
      K. Chung, N. Ma, T. Park, D. Kim, D. Yoo, and C. Kim, A modified damage model for advanced high strength steel sheets, Int. J. Plast., 27(2011), No. 10, p. 1485.
      [12]
      J. Lee, S.J. Lee, and B.C. De Cooman, Effect of micro-alloying elements on the stretch-flangeability of dual phase steel, Mater. Sci. Eng. A, 536(2012), p. 231.
      [13]
      K. Kamibayashi, Y. Tanabe, Y. Takemoto, I. Shimizu, and T. Senuma, Influence of Ti and Nb on the strength-ductility-hole expansion ratio balance of hot-rolled low-carbon high-strength steel sheets, ISIJ Int., 52(2012), No. 1, p. 151.
      [14]
      B. Wang, Z.Y. Liu, X.G. Zhou, and G.D. Wang, Improvement of hole-expansion property for medium carbon steels by ultra fast cooling after hot strip rolling, J. Iron Steel Res. Int., 20(2013), No. 6, p. 25.
      [15]
      E.J. Chun, H. Do, S. Kim, D.G. Nam, Y.H. Park, and N. Kang, Effect of nanocarbides and interphase hardness deviation on stretch-flangeability in 998 MPa hot-rolled steels, Mater. Chem. Phys., 140(2013), No. 1, p. 307.
      [16]
      X.P. Chen, H.M. Jiang, Z.X. Cui, C.W. Lian, and C. Lu, Hole expansion characteristics of ultra high strength steels, Procedia Eng., 81(2014), p. 718.
      [17]
      L.Y. Zhou, D. Zhang, and Y.Z. Liu, Influence of silicon on the microstructures, mechanical properties and stretch-flangeability of dual phase steels, Int. J. Miner. Metall. Mater., 21(2014), No. 8, p. 755.
      [18]
      Z.K. Teng and X.M. Chen, Edge cracking mechanism in two dual-phase advanced high strength steels, Mater. Sci. Eng. A, 618(2014), p. 645.
      [19]
      J.Q. Qian and Y. Yue, Factors influencing dual phase steel flanging limit punching, J. Iron Steel Res. Int., 21(2014), No. 12, p. 1124.
      [20]
      M. Mukherjee, A.R. Chintha, S. Kundu, S. Misra, J. Singh, C. Bhanu, and T. Venugopalan, Development of stretch flangeable ferrite-bainite grades through thin slab casting and rolling, Mater. Sci. Technol., 32(2016), No. 4, p. 348.
      [21]
      F.S. Le Pera, Improved etching technique for the determina-tion of percent martensite in high-strength dual-phase steels, Metallography, 12(1979), No. 3, p. 263.
      [22]
      P. Van Houtte, The "MTM-FHM" Software System Manual, Materiaalkunde Department, Katholieke Universiteit, Leuven, 1995.
      [23]
      J. Ferreira, J. Tepedino, and T. Melo, Formability of a 590 MPa dual phase steel compared to two HSLA steels with similar yield and tensile strengths,[in] Proceedings of the International Conference on New Developments in Advanced High-Strength Sheet Steels, Orlando, 2008, p. 339.
      [24]
      A. Phillips, H. Kaul, J. Burg, C. Killmore, J. Williams, P. Campbell, and W. Blejde, Effect of microstructure and texture on the edge formability of light gauge strip steel, ISIJ Int., 51(2011), No. 5, p. 832.
      [25]
      M.F. Ashby, The deformation of plastically non-homogeneous materials, Philos. Mag., 21(1970), No. 170, p. 399.
      [26]
      F. Spenger, T. Hebesberger, A. Pichler, C. Krempaszky, and E.A. Werner, AHSS steel grades:strain hardening and damage as material design criteria,[in] Proceedings of the International Conference on New Developments in Advanced High-Strength Sheet Steels, Orlando, 2008, p. 39.
      [27]
      G.E. Dieter, Mechanical Metallurgy, McGraw-Hill Book Company, Singapore, 1988, p. 265.
      [28]
      R.G. Davies, The deformation behavior of a vanadium-strengthened dual phase steel, Metall. Trans. A, 9(1978), No. 1, p. 41.
      [29]
      A.K. De, S. Vandeputte, and B.C. De Cooman, Kinetics of low temperature precipitation in a ULC-bake hardening steel, Scripta Mater., 44(2001), No. 4, p. 695.
      [30]
      L.M. Cheng, W.J. Poole, J.D. Embury, and D.J. Lloyd, The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030, Metall. Mater. Trans. A, 34(2003), No. 11, p. 2473.
      [31]
      W. Yan, L. Zhu, W. Sha, Y.Y. Shan, and K. Yang, Change of tensile behavior of a high-strength low-alloy steel with tempering temperature, Mater. Sci. Eng. A, 517(2009), No. 1-2, p. 369.
      [32]
      M. Cai, H. Ding, Y. Lee, Z. Tang, and J. Zhang, Effects of Si on microstructural evolution and mechanical properties of hot-rolled ferrite and bainite dual-phase steels, ISIJ Int., 51(2011), No. 3, p. 476.
      [33]
      C. Mesplont, T. Waterschoot, S. Vandeputte, D. Vandershueren, and B.C. De Cooman, Development of high-strength bainitic steels for automotive applications,[in] Proceedings of the 41st Mechanical Working and Steel Processing Conference, Baltimore, 1999, p. 515.
      [34]
      T. Gladman, The Physical Metallurgy of Microalloyed Steels, Institute of Materials, London, 1997, p. 363.
      [35]
      D. Terentyev and F. Gao, Blunting of a brittle crack at grain boundaries:An atomistic study in BCC Iron, Mater. Sci. Eng. A, 576(2013), p. 231.
      [36]
      S.K. Paul, Non-linear correlation between uniaxial tensile properties and shear-edge hole expansion ratio, J. Mater. Eng. Perform., 23(2014), p. 3610.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计