留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 25 Issue 4
Apr.  2018
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  440
  • HTML全文浏览量:  71
  • PDF下载量:  11
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2018  >  25(4): 453-458
Ya-ran Zhang, Qi Cai, Yong-chang Liu, Zong-qing Ma, Chong Li,  and Hui-jun Li, Evaluation of precipitation hardening in TiC-reinforced Ti2AlNb-based alloys, Int. J. Miner. Metall. Mater., 25(2018), No. 4, pp. 453-458. https://doi.org/10.1007/s12613-018-1591-x
Cite this article as:
Ya-ran Zhang, Qi Cai, Yong-chang Liu, Zong-qing Ma, Chong Li,  and Hui-jun Li, Evaluation of precipitation hardening in TiC-reinforced Ti2AlNb-based alloys, Int. J. Miner. Metall. Mater., 25(2018), No. 4, pp. 453-458. https://doi.org/10.1007/s12613-018-1591-x
shu
引用本文 PDF XML SpringerLink
研究论文

Evaluation of precipitation hardening in TiC-reinforced Ti2AlNb-based alloys

  • State Key Laboratory of Hydraulic Engineering Simulation and Safety, School of Materials Science and Engineering, Tianjin University, Tianjin 300354, China;

  • Materials Genome Institute, Shanghai University, Shanghai 200444, China

  • 通讯作者:

    Yong-chang Liu    E-mail: licmtju@163.com

  • Ti2AlNb-based alloys with 0.0wt%, 0.6wt%, and 2.0wt% carbon nanotube (CNT) addition were fabricated from spherical Ti-22Al-25Nb powder by sintering in the B2 single-phase region. Phase identification and microstructural examination were performed to evaluate the effect of carbon addition on the hardness of the alloys. Carbon was either in a soluble state or in carbide form depending on its concentration. The acicular carbides formed around 1050℃ were identified as TiC and facilitated the transformation of α2+B2 → O. The TiC was located within the acicular O phase. The surrounding O phase was distributed in certain orientations with angles of 65° or 90° O phase particles. The obtained alloy was composed of acicular O, Widmanstatten B2+O, and acicular TiC. As a result of the precipitation of carbides as well as the O phase, the hardness of the alloy with 2.0wt% CNT addition increased to HV 429±9.
    • Research Article

    Evaluation of precipitation hardening in TiC-reinforced Ti2AlNb-based alloys

    + Author Affiliations
      Abstract
    • Ti2AlNb-based alloys with 0.0wt%, 0.6wt%, and 2.0wt% carbon nanotube (CNT) addition were fabricated from spherical Ti-22Al-25Nb powder by sintering in the B2 single-phase region. Phase identification and microstructural examination were performed to evaluate the effect of carbon addition on the hardness of the alloys. Carbon was either in a soluble state or in carbide form depending on its concentration. The acicular carbides formed around 1050℃ were identified as TiC and facilitated the transformation of α2+B2 → O. The TiC was located within the acicular O phase. The surrounding O phase was distributed in certain orientations with angles of 65° or 90° O phase particles. The obtained alloy was composed of acicular O, Widmanstatten B2+O, and acicular TiC. As a result of the precipitation of carbides as well as the O phase, the hardness of the alloy with 2.0wt% CNT addition increased to HV 429±9.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(44)
    • [1]
      D. Banerjee and J.C. Williams, Perspectives on titanium science and technology, Acta Mater., 61(2013), No. 3, p. 844.
      [2]
      A. Nocivin, I. Cinca, D. Raducanu, V.D. Cojocaru, and I.A. Popovici, Mechanical properties of a Gum-type Ti-Nb-Zr-Fe-O alloy, Int. J. Miner. Metall. Mater., 24(2017), No. 8, p. 909.
      [3]
      Y.Y. Zong, B. Shao, Y.T. Tian, and D.B. Shan, A study of the sharp yield point of a Ti-22Al-25Nb alloy, J. Alloys Compd., 701(2017), p. 727.
      [4]
      X. Lu, L.H. Zhao, L.P. Zhu, B. Zhang, and X.H. Qu, High-temperature mechanical properties and deformation behavior of high Nb containing TiAl alloys fabricated by spark plasma sintering, Int. J. Miner. Metall. Mater., 19(2012), No. 4, p. 354.
      [5]
      H.B. Feng, D.C. Jia, and Y. Zhou, Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites, Composites Part A, 36(2005), No. 5, p. 558.
      [6]
      S. Ranganath and R.S. Mishra, Steady state creep behaviour of particulate-reinforced titanium matrix composites, Acta Mater., 44(1996), No. 3, p. 927.
      [7]
      Y.Y. Liu, Z.K. Yao, H.Z. Guo, and H.H. Yang, Microstructure and property of the Ti-24Al-15Nb-1.5 Mo/TC11 joint welded by electron beam welding, Int. J. Miner. Metall. Mater., 16(2009), No. 5, p.568.
      [8]
      H.B. Yang, T. Gao, H.C. Wang, J.F. Nie, and X.F Liu, Influence of C/Ti stoichiometry in TiCx on the grain refinement efficiency of Al-Ti-C master alloy, J. Mater. Sci. Technol., 33(2017), No. 7, p. 616.
      [9]
      S.C. Tjong and Z.Y. Ma, Microstructural and mechanical characteristics of in situ metal matrix composites, Mater. Sci. Eng. R, 29(2000), No. 3-4, p. 49.
      [10]
      B. Ghosh and S.K. Pradhan, Microstructure characterization of nanocrystalline TiC synthesized by mechanical alloying, Mater. Chem. Phys., 120(2010), No. 2-3, p. 537.
      [11]
      M. Razavi, M.R. Rahimipour, and A.H. Rajabi-Zamani, Effect of nanocrystalline TiC powder addition on the hardness and wear resistance of cast iron, Mater. Sci. Eng. A, 454-455(2007), p. 144.
      [12]
      E. Zhang, S.Y. Zeng, and B. Wang, Preparation and microstructure of in situ particle reinforced titanium matrix alloy, J. Mater. Process. Technol., 125-126(2002), p. 103.
      [13]
      I.A.M. Arif, M.K. Talari, A.L. Anis, M.H. Ismail, and N.K. Babu, Grain refinement, microstructural and hardness investigation of C added Ti-15-3 Alloys prepared by argon arc melting, Trans. Indian Inst. Met., 70(2017), No. 3, p. 861.
      [14]
      R. Sarkar, P. Ghosal, K. Muraleedharan, T.K. Nandy, and K.K. Ray, Effect of boron and carbon addition on microstructure and mechanical properties of Ti-15-3 alloy, Mater. Sci. Eng. A, 528(2011), No. 13-14, p. 4819.
      [15]
      R. Banoth, R. Sarkar, A. Bhattacharjee, T.K. Nandy, and G. V.S.N Rao, Effect of boron and carbon addition on microstructure and mechanical properties of metastable beta titanium alloys, Mater. Des., 67(2015), p. 50.
      [16]
      N.K. Babu, K. Kallip, M. Leparoux, M.K. Talari, K.A. Alogab, and N.M. Alqahtani, Phase evolution during high energy cube milling of Ti-6Al-4V0.5 vol% TiC powders using heptane and tin as process control agents (PCAs), Adv. Eng. Mater., 19(2017), No. 2, art. No. 1600662.
      [17]
      Q.M. Wang, K. Zhang, J. Gong, Y.Y. Cui, C. Sun, and L.S. Wen, NiCoCrAlY coatings with and without an Al2O3/Al interlayer on an orthorhombic Ti2AlNb-based alloy:Oxidation and interdiffusion behaviors, Acta Mater., 55(2007), No. 4, p. 1427.
      [18]
      H.P. Duan, H.X. Xu, W.H. Su, Y.B. Ke, Z.Q. Liu, and H.H. Song, Effect of oxygen on the microstructure and mechanical properties of Ti-23Nb-0.7Ta-2Zr alloy, Int. J. Miner. Metall. Mater., 19(2012), No. 12, p. 1128
      [19]
      H. Zhang, H.J. Li, Q.Y. Guo, Y.C. Liu, and L.M. Yu, Hot deformation behavior of Ti-22Al-25Nb alloy by processing maps and kinetic analysis, J. Mater. Res., 31(2016), No. 12, p. 1764.
      [20]
      B. Shao, Y.Y. Zong, D.S. Wen, Y.T. Tian, and D.B. Shan, Investigation of the phase transformations in Ti-22Al-25Nb alloy, Mater. Charact., 114(2016), p. 75.
      [21]
      Y.C. Liu, F. Lan, G.C. Yang, and Y.H. Zhu, Microstructural evolution of rapidly solidified Ti-Al peritectic alloy, J. Cryst. Growth, 271(2004), No. 1-2, p. 313.
      [22]
      C.J. Cowen and C.J. Boehlert, Comparison of the microstructure, tensile, and creep behavior for Ti-22Al-26Nb (at. pct) and Ti-22Al-26Nb-5B (at. pct), Metall. Mater. Trans. A, 38(2007), No. 1, p. 26.
      [23]
      T.K. Nandy, R.S. Mishra, and D. Banerjee, Creep behaviour of an orthorhombic phase in a Ti-Al-Nb alloy, Scripta Met. Mater., 28(1993), No. 5, p. 569.
      [24]
      C.J. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle, Part I. The microstructural evolution in Ti-Al-Nb O + BCC orthorhombic alloys, Metall, Mater. Trans. A, 30(1999), No. 9, p. 2305.
      [25]
      I.W. Hall and C.Y. Ni, Thermal stability of an SCS-6/Ti-22Al-23Nb composite, Mater. Sci. Eng. A, 192-193(1995), p. 987.
      [26]
      Y.Q. Yang, Y. Zhu, Z.J. Ma, and Y. Chen, Formation of interfacial reaction products in SCS-6SiC/Ti2AlNb composites, Scripta Mater., 51(2004), No. 5, p. 385.
      [27]
      X. Luo, Y.Q. Wang, Y.Q. Yang, M.X. Zhang, B. Huang, S. Liu, and N. Jin, Effect of C/Mo duplex coating on the interface and tensile strength of SiCf/Ti-21Al-29Nb composites, J. Alloys Compd., 721(2017), p. 653.
      [28]
      P.R. Smith, A.H. Rosenberger, M.J. Shepard, and R. Wheeler, Review AP/M approach for the fabrication of an orthorhombic titanium aluminide for MMC applications, J. Mater. Sci., 35(2000), No. 13, p. 3169.
      [29]
      J. Wu, L. Xu, Z.G. Lu, B. Lu, Y.Y. Cui, and R. Yang, Microstructure design and heat response of powder metallurgy Ti2AlNb alloys, J. Mater. Sci. Technol., 31(2015), No. 12, p. 1251.
      [30]
      P. Davies, R. Pederson, M. Coleman, and S. Birosca, The hierarchy of microstructure parameters affecting the tensile ductility in centrifugally cast and forged Ti-834 alloy during high temperature exposure in air, Acta Mater., 117(2016), p. 51.
      [31]
      S. Gorsse, Y. L. Petitcorps, S. Matar, and F. Rebillat, Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite, Mater. Sci. Eng. A, 340(2003), No. 1-2, p. 80.
      [32]
      H. Feng, D. Jia, and Y. Zhou, Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti-4.0Fe-7.3Mo composite, J. Mater. Process. Technol., 182(2007), No. 1-2, p. 79.
      [33]
      H.Z. Niu, Y.F. Chen, D.L. Zhang, Y.S. Zhang, J.W. Lu, W. Zhang, and P.X. Zhang, Fabrication of a powder metallurgy Ti2AlNb-based alloy by spark plasma sintering and associated microstructure optimization, Mater. Des., 89(2016), p. 823.
      [34]
      M. Li, Q. Cai, Y.C. Liu, Z.Q. Ma, Z.M. Wang, Y. Huang, and J.X. Yu, Dual structure O + B2 for enhancement of hardness in furnace-cooled Ti2AlNb-based alloys by powder metallurgy, Adv. Powder Technol., 28(2017), No. 7, p. 1719.
      [35]
      M. Li, Q. Cai, Y. Liu, Z. Ma, Z. Wang, Y. Huang, and H. Li, Formation of fine B2/β + O structure and enhancement of hardness in the aged Ti2AlNb-Based alloys prepared by spark plasma sintering, Metall. Mater. Trans. A, 48(2017), No. 9, p. 4365.
      [36]
      M. Behera, S. Raju, R. Mythili, and S. Saroja, Study of kinetics of α⇔β phase transformation in Ti-4.4 mass% Ta-1.9 mass% Nb alloy using differential scanning calorimetry, J. Therm. Anal. Calorim., 124(2016), No. 3, p. 1217.
      [37]
      M.I.D. Barros, D. Rats, L. Vandenbulcke, and G. Farges, Influence of internal diffusion barriers on carbon diffusion in pure titanium and Ti-6Al-4V during diamond deposition, Diamond Relat. Mater., 8(1999), No. 6, p. 1022.
      [38]
      M. Hansen, K. Anderko, and H.W. Salzberg, Constitution of binary alloys, J. Electrochem. Soc., 105(1958), No. 12, p. 260.
      [39]
      K. Muraleedharan, D. Banerjee, S. Banerjee, and S. Lele, The α2-to-O transformation in Ti-Al-Nb alloys, Philos. Mag. A., 5(1995), No. 5, p. 1011.
      [40]
      J. Roger, B. Gardiola, J. Andrieux, J.C. Viala, and O. Dezellus, Synthesis of Ti matrix composites reinforced with TiC particles:thermodynamic equilibrium and change in microstructure, J. Mater. Sci., 52(2017), No. 7, p. 4129.
      [41]
      H.M. Rietveld, A profile refinement method for nuclear and magnetic structures, J. Appl. Crystallogr., 2(1969), No. 2, p. 65.
      [42]
      W. Wang, W.D. Zeng, C. Xue, X.B. Liang, and J.W. Zhang, Quantitative analysis of the effect of heat treatment on microstructural evolution and microhardness of an isothermally forged Ti-22Al-25Nb (at.%) orthorhombic alloy, Intermetallics, 45(2014), p. 29.
      [43]
      Y. Wang, X.Q. Cai, Z.W. Yang, D.P. Wang, X.G. Liu, and Y.C. Liu, Effects of Nb content in Ti-Ni-Nb brazing alloys on the microstructure and mechanical properties of Ti-22Al-25Nb alloy brazed joints, J. Mater. Sci. Technol., 33(2017), No. 7, p. 682.
      [44]
      B. Shao, S.X. Wan, D.B. Shan, B. Guo, and Y.Y. Zong, Hydrogen-induced improvement of the cylindrical drawing properties of a Ti-22Al-25Nb alloy, Adv. Eng. Mater., 19(2016), No. 3, art. No. 1600621.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计