Cite this article as: |
Bao-guang Wang, Wen-hui Yang, Hong-ye Gao, and Wen-huai Tian, Microstructure and phase composition of hypoeutectic Te–Bi alloy as evaporation source for photoelectric cathode, Int. J. Miner. Metall. Mater., 25(2018), No. 5, pp. 584-590. https://doi.org/10.1007/s12613-018-1605-8 |
Hong-ye Gao E-mail: qgaohongye@msn.com
Wen-huai Tian E-mail: wenhuaitian@ustb.edu.cn
[1] |
J.R. Rathod, H.S. Patel, K.D. Patel, and V.M. Pathak, Structural and optical characterization of zinc telluride thin films, Adv. Mater. Res., 665(2013), p. 254.
|
[2] |
R. Yang, W.Q. Jie, and H. Liu, Characterization and chemical surface texturization of bulk ZnTe crystals grown by temperature gradient solution growth, Int. J. Miner. Metall. Mater., 22(2015), No. 7, p. 755.
|
[3] |
C.Y. Lu, X.M. Li, L.B. Tang, S.K. Lai, L. Rogée, K.S. Teng, F.L. Qian, L.L. Zhou, and S.P. Lau, Tellurium quantum dots: Preparation and optical properties, Appl. Phys. Lett., 111(2017), No. 6, art. No. 063112.
|
[4] |
R.A. Loch, Cesium–Telluride and Magnesium for High Quality Photocathodes [Dissertation], University of Twente, Netherlands, 2005.
|
[5] |
A. Aryshev, M. Shevelev, Y. Honda, N. Terunuma, and J. Urakawa, Femtosecond response time measurements of a Cs2Te photocathode, Appl. phys. Lett., 111(2017), No. 3, art. No. 033508.
|
[6] |
H.G. Wang, W.J. Zhou, H.G. Li, J. Yue, E.Z. Zhang, Y. Wang, and X.H. Chang, Effective evaluation of the noise characteristics of solar-blind Cs2Te ultraviolet image intensifiers, Optik, 143(2017), p. 14.
|
[7] |
X. Zhang, Y.J. Zhang, Y.S. Qian, C. Feng, J.Z. Zhang, Y.L. Jiang, and Z.Y. Pan, Spectral response characteristics of transmission-mode alkali telluride photocathodes working from vacuum-ultraviolet to ultraviolet band, J. Vac. Sci. Technol. B, 35(2017), No. 6, art. No. 061202-1.
|
[8] |
Z. Yusof, A. Denchfield, M. Warren, J. Cardenas, N. Samuelson, L. Spentzouris, J. Power, and J. Zasadzinski, Photocathode quantum efficiency of ultra-thin Cs2Te layers on Nb substrates, Phys. Rev. Accel. Beams, 20(2017), No. 12, art. No. 123401
|
[9] |
S. Cui, C. Boussard-plédel, L. Calvez, F. Rojas, K. Chen, H. Ning, M.J. Reece, T. Guizouarn, and B. Bureau, Comprehensive study of tellurium based glass ceramics for thermoelectric application, Adv. Appl. Ceram., 114(2015), Suppl. 1, p. S42.
|
[10] |
E. Poindexter and L. Schultz, Ultraviolet-visible spectroscopic investigation of reaction of rubidium and tellurium in liquid ammonia solution, Spectrosc. Lett., 46(2013), No. 4, p. 264.
|
[11] |
Y.L. Wei, B.S. Zhao, X.F. Sai, Y.A. Liu, and X.B.Cao, Development of cesium telluride UV cathode with high quantum efficiency and solar-blind characteristics, Chin. J. Vac. Sci. Technol., 32(2012), No. 7, p. 555.
|
[12] |
A.H. Sommer, Spectrally selective (solar blind) UV photomultipliers with fluoride windows, Rev. Sci. Instrum., 32(1961), No. 3, p. 356.
|
[13] |
J.W. Hu, B.G. Wang, C.Y. Wang, and W.H. Tian, Microstructure and composition of Te–In alloy prepared by near-rapid solidification process, J. Funct. Mater., 46(2015), No. 3, p. 21001.
|
[14] |
B.G. Wang, J.W. Hu, C.Y. Wang, W.H. Yang, and W.H. Tian, The microstructure and composition of equilibrium phases formed in hypoeutectic Te–In alloy during solidification, Mater. Charact., 125(2017), p. 46.
|
[15] |
Y.N. Dai, Binary Alloy Phase Diagrams, Science Press, Beijing, 2009.
|
[16] |
R.E. Honig and D.A. Kramer, Vapor pressure data for the solid and liquid elements, RCA Rev., 30(1969), No. 2, p. 285.
|
[17] |
X.P. Wu, L. Yuan, S.M. Zhou, S.Y. Lou, Y.Q. Wang, T. Gao, Y.B. Liu, and X.J. Shi, Controlled synthesis of multi-morphology Te crystals by a convenient Lewis acid/base-assisted solvothermal method, J. Nanopart. Res., 14(2012), No. 8, p. 1.
|
[18] |
M.M. Rashad, A. El-Dissouky, H.M. Soliman, A.M. Elseman, H.M. Refaat, and A. Ebrahim, Structure evaluation of bismuth telluride (Bi2Te3) nanoparticles with enhanced Seebeck coefficient and low thermal conductivity, Mater. Res. Innovations, 2017. DOI: 10.1080/14328917.2017. 1320838.
|
[19] |
M.N. Croker, R.S. Fidler, and R.W. Smith, The characterization of eutectic structures, Proc. R. Soc. Lond. A, 335(1973), No. 1600, p. 15.
|
[20] |
N.P. Gorbachuk and V.R. Sidorko, Heat capacity and enthalpy of Bi2Si3 and Bi2Te3 in the temperature range 58–1012 K, Powder Metall. Met. Ceram., 43(2004), No. 5-6, p. 284.
|
[21] |
M.M. Makhlouf and H.V. Guthy, The aluminum–silicon eutectic reaction: mechanisms and crystallography, J. Light Met., 1(2001), No. 4, p. 199.
|
[22] |
G.F. Bolling, Some thermal data for Bi2Te3, J. Chem. Phys., 33(1960), No. 1, p. 305.
|
[23] |
L.D. Zhao, B.P. Zhang, J.F. Li, H.L. Zhang, and W.S. Liu, Enhanced thermoelectric and mechanical properties in textured n-type Bi2Te3 prepared by spark plasma sintering, Solid State Sci., 10(2008), No. 5, p. 651.
|