Effect of different deformation and annealing procedures on non-magnetic textured Cu<sub>60</sub>Ni<sub>40</sub> alloy substrates

Jin Cui; Hong-li Suo; Jin-hua Wang; Jean-Claude Grivel; Lin Ma; Chun-yan Li; Yao-tang Ji; Shaheen Kausar; Min Liu; Yi Wang

doi:10.1007/s12613-018-1642-3

Volume 25 Issue 8

Aug. 2018

Turn off MathJax

数据统计

计量

文章访问数: 462
HTML全文浏览量: 70
PDF下载量: 8
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2018 > 25(8): 930-936

Jin Cui, Hong-li Suo, Jin-hua Wang, Jean-Claude Grivel, Lin Ma, Chun-yan Li, Yao-tang Ji, Shaheen Kausar, Min Liu, and Yi Wang, Effect of different deformation and annealing procedures on non-magnetic textured Cu₆₀Ni₄₀ alloy substrates, Int. J. Miner. Metall. Mater., 25(2018), No. 8, pp. 930-936. https://doi.org/10.1007/s12613-018-1642-3

Cite this article as:

Jin Cui, Hong-li Suo, Jin-hua Wang, Jean-Claude Grivel, Lin Ma, Chun-yan Li, Yao-tang Ji, Shaheen Kausar, Min Liu, and Yi Wang, Effect of different deformation and annealing procedures on non-magnetic textured Cu60Ni40 alloy substrates, Int. J. Miner. Metall. Mater., 25(2018), No. 8, pp. 930-936. https://doi.org/10.1007/s12613-018-1642-3

Citation:

PDF( 1765 KB)

引用本文 PDF XML SpringerLink

研究论文

Effect of different deformation and annealing procedures on non-magnetic textured Cu₆₀Ni₄₀ alloy substrates

College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
Department of Energy Conversion and Storage, Technical University of Denmark, Roskilde 4000, Denmark

通讯作者:
Hong-li Suo E-mail: honglisuo@bjut.edu.cn

中文摘要

In this work, a series of specimens was prepared by the casting method. Sharp cube-textured substrates were processed by heavy cold rolling and recrystallization annealing (i.e., the rolling-assisted biaxially textured substrates (RABiTS) method). Both the rolling and the recrystallization texture in the alloy tapes were investigated by X-ray diffraction and electron back-scatter diffraction, respectively. The results showed that a strong copper-type deformation texture was obtained in the heavy cold-rolled substrate. In addition, the recrystallization annealing process was found to be very important for the texture transition in the Cu–Ni alloy substrates. The cube texture content in the Cu₆₀Ni₄₀ alloy substrates reached 99.7% (≤10°) after optimization of the cold-rolling procedure and the recrystallizing heat-treatment process, whereas the content of low-angle grain boundaries (from 2° to 10° misorientation) in the substrate reached 95.1%.

关键词:

Research Article

Effect of different deformation and annealing procedures on non-magnetic textured Cu₆₀Ni₄₀ alloy substrates

+ Author Affiliations

Abstract

Abstract

In this work, a series of specimens was prepared by the casting method. Sharp cube-textured substrates were processed by heavy cold rolling and recrystallization annealing (i.e., the rolling-assisted biaxially textured substrates (RABiTS) method). Both the rolling and the recrystallization texture in the alloy tapes were investigated by X-ray diffraction and electron back-scatter diffraction, respectively. The results showed that a strong copper-type deformation texture was obtained in the heavy cold-rolled substrate. In addition, the recrystallization annealing process was found to be very important for the texture transition in the Cu–Ni alloy substrates. The cube texture content in the Cu₆₀Ni₄₀ alloy substrates reached 99.7% (≤10°) after optimization of the cold-rolling procedure and the recrystallizing heat-treatment process, whereas the content of low-angle grain boundaries (from 2° to 10° misorientation) in the substrate reached 95.1%.
- non-magnetic;
- CuNi alloy substrates;
- annealing;
- cube texture

FullText(HTML)

Supplements(0)

References(29)

References

[1]	S Kang, A Goyal, J. Li, A.A. Gapud, P.M. Martin, L. Heatherly, J.R. Thompson, D.K. Christen, F.A. List, M. Paranthaman, and D.F. Lee, High-performance high-Tc superconducting wires, Science, 311(2006), No. 5769, p. 1911.
[2]	D.P. Norton, A. Goyal, J.D. Budai, D.K. Christen, D.M. Kroeger, E.D. Specht, Q. He, B Saffian, M. Paranthaman, C.E. Klabunde, D.F. Lee, B.C. Sales, and F.A. List, Epitaxial YBa₂Cu₃O₇ on biaxially textured nickle (001): An approach to superconducting tapes with high critical current density, Science, 274(1996), No. 5288, p. 755.
[3]	Y.B. Ji, C.S. Li, H.L. Zheng, and L. Zhu, Recrystallization of Ni–5%W substrates by reel-to-reel method, Rare Met. Mater. Eng., 40(2011), No. 9, p. 1526.
[4]	R. Hühne, J. Eickemeyer, V.S. Sarma, A. Güth, T. Thersleff, J. Freudenberger, O. de Haas, M. Weigand, J.H. Durrell, L. Schultz, and B. Holzapfel, Application of textured highly alloyed Ni–W tapes for preparing coated conductor architectures, Supercond. Sci. Technol., 23(2010), No. 3, art. No. 034015.
[5]	Y.X. Zhou, S.V. Ghalsasi, M Hanna, Z.J. Tang, R.L. Meng, and K Salama, Fabrication of cube-textured Ni–9%atW substrate for YBCO superconducting wires using powder metallurgy, IEEE Trans. Appl. Supercond., 17(2007), No. 2, p. 3428.
[6]	S. Piñol, J. Diaz, M. Segarra, and F. Espiell, Preparation of biaxially cube textured Cu substrate tapes for HTS coated conductor applications, Supercond. Sci. Technol., 14(2001), No. 1, p. 11.
[7]	H. Tian, H.L. Suo, Y.R. Liang, Y. Zhao, and J.C. Grivel, Effect of surface shear on cube texture formation in heavy cold-rolled Cu–45at% Ni alloy substrates, Mater. Lett., 141(2015), p. 83.
[8]	H. Tian, H.L. Suo, Y.R. Liang, L. Ma, Y.C. Meng, M.X. Li, and J.H. Wang, Effect of substrate tape thickness on cube texture formation of non-magnetic Cu–45Ni alloy, Rare Met. Mater. Eng., 44(2015), No. 1, p. 85.
[9]	M. Segarra, L. Miralles, J. Diaz, E. Xuriguera, J.M. Chimenos, F. Espiell, and S. Pinol, Copper and CuNi alloys substrates for HTS coated conductor applications protected from oxidation, Mater. Sci. Forum, 426-432(2003), No. 4, p. 3511.
[10]	A. Girard, C.E. Bruzek, J.L. Jorda, L. Ortega, and J.L. Soubeyroux, Industrial Cu–Ni alloys for HTS coated conductor tape, J. Phys. Conf. Ser., 43(2006), No. 1, p. 341.
[11]	S.S. Vadlamani, J. Eickemeyer, L. Schultz, and B. Holzapfel, Rolling and recrystallisation textures in Cu–Al, Cu–Mn and Cu–Ni alloys, J. Mater. Sci., 42(2007), No. 17, p. 7586.
[12]	J. Eickemeyer, R. Hühne, A. Güth, C. Rodig, H. Klauss, and B. Holzapfel, Textured Ni–7.5at.%W substrate tapes for YBCO-coated conductors, Supercond. Sci. Technol., 21(2008), No. 10, art. No. 105012.
[13]	J. Eickemeyer, R. Hühne, A. Güth, C. Rodig, U. Gaitzsch, J. Freudenberger, L. Schultz, and B. Holzapfel, Textured Ni–9.0at.%W substrate tapes for YBCO-coated conductors,Supercond. Sci. Technol., 23(2010), No. 8, article No. 085012.
[14]	Y. Zhao, H.L. Suo, Y.H. Zhu, J.C. Grivel, M.M. Gao, L. Ma, R.F. Fan, M. Liu, Y. Ji, and M.L. Zhou, Study on the formation of cubic texture in Ni–7at.%W alloy substrates by powder metallurgy routes, Acta Mater., 57(2009), No. 3, p. 773.
[15]	A. Vannozzi, G. Celentano, A. Angrisani, A Augieri, L Ciontea, I Colantoni, V Galluzzi, U Gambardella, A Mancini, T Petrisor, A Rufoloni, and G Thalmaier, Nickel-Copper alloy tapes as textured substrates for YBCO coated conductors, J. Phys. Conf. Ser., 97(2008), No. 1, art. No. 012188.
[16]	A. Vannozzi, G. Thalmaier, A.A. Armenio, A. Augieri, V. Galluzzi, A. Mancini, A. Rufoloni, T. Petrisor, and G. Celentano, Development and characterization of cube-textured Ni–Cu–Co substrates for YBCO-coated conductors, Acta Mater., 58(2010), No. 3, p. 910.
[17]	U. Gaitzsch, J. Eickemeyer, C. Roding, J. Freudenberger, B. Holzapfel, and L. Schultz, Paramagnetic substrates for thin film superconductors: Ni–W and Ni–W–Cr, Scripta Mater., 62(2010), No. 7, p. 512.
[18]	C. Cantoni, D.K. Christen, E.D. Specht, M. Varela, J.R. Thompson, A. Goyal, C. Thieme, Y. Xu, and S.J. Pennycook, Characterization of suitable buffer layers on Cu and Cu-alloy metal substrates for the development of coated conductors, Supercond. Sci. Technol., 17(2004), No. 5, p. S341.
[19]	B. de Boer, J. Eickemeyer, N. Reger, L.F. G.-R, J. Richter, B. Holzapfel, L. Schultz, W. Prusseit, and P. Berberich, Cube textured nickel alloy tapes as substrates for YBa₂Cu₃O_7–δ-coated conductors, Acta Mater., 49(2001), No. 8, p. 1421.
[20]	A. Goyal, D.P. Norton, J.D. Budai, M. Paranthaman, E.D. Specht, D.M. Kroeger, D.K. Christen, Q. He, B. Saffian, F.A. List, D.F. Lee, P.M. Martin, C.E. Klabunde, E. Hartfield, and V.K. Sikka, High critical current density superconducting tapes by epitaxial deposition of YBa₂Cu₃O_x thick films on biaxially textured metals, Appl. Phys. Lett., 69(1996), No. 12, p. 1795.
[21]	H.Q. Qiu, Study on Textured NiW and Cu Alloy Composite Substrates Used for Coated Conductors [Dissertation], Beijing University of technology, Beijing, 2011, p. 42.
[22]	A. Tuissi, R. Corti, E. Villa, A.P. Bramley, M.E. Vickers, and J.E. Evetts, Biaxially textured Ni and CuNi alloy substrate tapes for HTS coated conductor applications, Inst. Phys. Conf. Ser., 1999, No. 167, p. 399.
[23]	F. Fan, Y.M. Lu, Z.Y. Liu, B. Gao, L.L. Ying, J.L. Liu, and C.B. Cai, Biaxially texture and magnetism in Cu–Ni alloy for substrates of superconductor coated conductors, Chin. J. Low Temp. Phys., 31(2009), No. 2, p. 102.
[24]	J. Hirsch and K. Lücke, Overview no. 76: Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals-I. Description of rolling texture development in homogeneous CuZn alloys, Acta Metall., 36(1988), No. 11, p. 2863.
[25]	H. Tian, Study on Mechanism of Cube Texture Formation in Copper Nickel Alloy Substrates Used for Coated Conductors [Dissertation], Beijing University of technology, Beijing, 2013, p. 46.
[26]	T. Petrisor, V. Boffa, G. Celentano, L. Ciontea, F. Fabbri, V. Galluzzi, U. Gambardella, A. Mancini, A. Rufoloni, and E. Varesi, Epitaxial oxidation of Ni–V biaxially textured tapes, Physica C, 377(2002), No. 1-2, p. 135.
[27]	G. Celentano, V. Boffa, L. Ciontea, F. Fabbri, V. Galluzzi, U. Gambardella, A. Mancini, T. Petrisor, R. Rogai, A. Rufoloni, and E. Varesi, High Jc YBCO coated conductors on non-magnetic metallic substrate using YSZ-based buffer layer architecture, Physica C, 372-376(2002), p. 790.
[28]	V.S. Sarma, J. Eickemeyer, A. Singh, L. Schultz, and B. Holzapfel, Development of high strength and strongly cube textured Ni–4.5% W/Ni–15% Cr composite substrate for coated conductor application, Acta Mater., 51(2003), No. 16, p. 4919.
[29]	P. Gerber, J. Tarasiuk, and B. Bacroix, Influence of the rolling reduction on static recrystallization in copper, Mater. Sci. Forum, 408-412(2002), No. 4, p. 851.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Effect of different deformation and annealing procedures on non-magnetic textured Cu₆₀Ni₄₀ alloy substrates

中文摘要

Effect of different deformation and annealing procedures on non-magnetic textured Cu₆₀Ni₄₀ alloy substrates

Abstract

References

数据统计

Catalog