Lithium-ion full cell with high energy density using nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode and SiO-C composite anode

Azhar Iqbal; Long Chen; Yong Chen; Yu-xian Gao; Fang Chen; Dao-cong Li

doi:10.1007/s12613-018-1702-8

Volume 25 Issue 12

Dec. 2018

Turn off MathJax

数据统计

计量

文章访问数: 685
HTML全文浏览量: 139
PDF下载量: 24
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2018 > 25(12): 1473-1481

Azhar Iqbal, Long Chen, Yong Chen, Yu-xian Gao, Fang Chen, and Dao-cong Li, Lithium-ion full cell with high energy density using nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode and SiO-C composite anode, Int. J. Miner. Metall. Mater., 25(2018), No. 12, pp. 1473-1481. https://doi.org/10.1007/s12613-018-1702-8

Cite this article as:

Azhar Iqbal, Long Chen, Yong Chen, Yu-xian Gao, Fang Chen, and Dao-cong Li, Lithium-ion full cell with high energy density using nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode and SiO-C composite anode, Int. J. Miner. Metall. Mater., 25(2018), No. 12, pp. 1473-1481. https://doi.org/10.1007/s12613-018-1702-8

Citation:

PDF( 892 KB)

引用本文 PDF XML SpringerLink

研究论文

Lithium-ion full cell with high energy density using nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode and SiO-C composite anode

Institute of Engineering Research, Hefei Guoxuan High-Tech Power Energy CO., Ltd, Hefei 230011, China

通讯作者:
Azhar Iqbal E-mail: aiqbalchemist@yahoo.com

中文摘要

A high-energy-density Li-ion battery with excellent rate capability and long cycle life was fabricated with a Ni-rich layered LiNi_0.8Mn_0.1Co_0.1O₂ cathode and SiO-C composite anode. The LiNi_0.8Mn_0.1Co_0.1O₂ and SiO-C exhibited excellent electrochemical performance in both half and full cells. Specifically, when integrated into a full cell configuration, a high energy density (280 Wh·kg^-1) with excellent rate capability and long cycle life was attained. At 0.5C, the full cell retained 80% of its initial capacity after 200 charge/discharge cycles, and 60% after 600 cycles, indicating robust structural tolerance for the repeated insertion/extraction of Li⁺ ions. The rate performance showed that, at high rate of 1C and 2C, 96.8% and 93% of the initial capacity were retained, respectively. The results demonstrate strong potential for the development of high energy density Li-ion batteries for practical applications.

关键词:

Research Article

Lithium-ion full cell with high energy density using nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode and SiO-C composite anode

+ Author Affiliations

Abstract

Abstract

A high-energy-density Li-ion battery with excellent rate capability and long cycle life was fabricated with a Ni-rich layered LiNi_0.8Mn_0.1Co_0.1O₂ cathode and SiO-C composite anode. The LiNi_0.8Mn_0.1Co_0.1O₂ and SiO-C exhibited excellent electrochemical performance in both half and full cells. Specifically, when integrated into a full cell configuration, a high energy density (280 Wh·kg^-1) with excellent rate capability and long cycle life was attained. At 0.5C, the full cell retained 80% of its initial capacity after 200 charge/discharge cycles, and 60% after 600 cycles, indicating robust structural tolerance for the repeated insertion/extraction of Li⁺ ions. The rate performance showed that, at high rate of 1C and 2C, 96.8% and 93% of the initial capacity were retained, respectively. The results demonstrate strong potential for the development of high energy density Li-ion batteries for practical applications.
- high energy density;
- full cell;
- rate performance;
- high capacity cathode

FullText(HTML)

Supplements(0)

References(37)

References

[1]	Y. Ding, D.B. Mu, B.R. Wu, R. Wang, Z.K. Zhao, and F. Wu, Recent progresses on nickel-rich layered oxide positive electrode materials used in lithium-ion batteries for electric vehicles, Appl. Energy, 195(2017), p. 586.
[2]	K. Wang, Y.M. Wei, and X. Zhang, Energy and emissions efficiency patterns of Chinese regions:A multi-directional efficiency analysis, Appl. Energy, 104(2013), p. 105.
[3]	Y.Z. Zhang, R. Xiong, H.W. He, and W.X. Shen, A lithium-ion battery pack state of charge and state of energy estimation algorithms using a hardware-in-the-loop validation, IEEE Trans. Power Electron., 32(2017), No. 6, p. 4421.
[4]	Z. Yang, J. Zhang, M.C.W. Kintner-Meyer, X. Lu, D. Choi, J.P. Lemmon, and J. Liu, Electrochemical energy storage for green grid, Chem. Rev. 111(2011), No. 5, p. 3577.
[5]	F.C. Sun, R. Xiong, and H.W. He, A systematic state-of-charge estimation framework for multi-cell battery pack in electric vehicles using bias correction technique, Appl. Energy, 162(2016), p. 1399.
[6]	J.H Lee, C.S. Yoon, J.Y Hwang, S.J Kim, F. Maglia, P. Lamp, S.T. Myung, and Y.K. Sun, High-energy-density lithium-ion battery using carbon-nanotube-si composite anode and compositionally graded Li[Ni_0.85Co_0.05Mn_0.10] O₂ cathode, Energy Environ. Sci., 9(2016), No. 6, p. 2152.
[7]	Z.H. Sun, D.D. Wang, Y.Y. Fan, L.S. Jiao, F.H. Li, T.S. Wu, D.X. Han, and L. Niu, Improved performances of LiNi_0.6Co_0.15Mn_0.25O₂ cathode material with full concentration-gradient for lithium ion batteries, RSC Adv., 6(2016), No. 105, p. 103747.
[8]	J.C. Zheng, B.Y. Yang, X.W. Wang, B. Zhang, H. Tong, W.J. Yu, and J.F. Zhang, Comparative investigation of Na₂FeP₂O₇ sodium insertion material synthesized by using different sodium sources, ACS Sustainable Chem. Eng. 6(2018), No. 4, p. 4966.
[9]	C.X. Zhou, P.B. Wang, J.C. Zheng, C.Y. Xia, B. Zhang, X.M. Xi, K.S. Xiao, D.Q. Liao, L.S. Yang, X.Q. Chen, and S.B. Qin, Cyclic performance of Li-rich layered material Li_1.1Ni_0.35Mn_0.65O₂ synthesized through a two-step calcination method, Electrochem. Acta, 252(2017), p. 286.
[10]	P.B. Wang, M.Z. Luo, J.C. Zheng, Z.J. He, H. Tong, and W.J. Yu, Comparative investigation of 0.5Li₂MnO₃.0.5LiNi_0.5Co_0.2Mn_0.3O₂ cathode materials synthesized by using different lithium sources, Front. Chem. 6(2018), p. 1.
[11]	M. Marinaro, D.H. Yoon, G. Gabrielli, P. Stegmaier, E. Figgemeier, P.C. Spurk, D. Nelis, G. Schmidt, J. Chauveau, P. Axmann, and M.W. Mehrens, High performance 1.2 Ah Si-alloy/Graphite\|LiNi_0.5Mn_0.3Co_0.2O₂ prototype Li-ion battery, J. Power Sources, 357(2017), p. 188.
[12]	S.T. Myung, F. Maglia, K.J. Park, C.S. Yoon, P. Lamp, S.J. Kim, and Y.K. Sun, Nickel-rich layered cathode materials for automotive lithium-ion batteries, ACS Energy Lett., 2(2016), No. 1, p. 196.
[13]	F. Schipper, M. Dixit, D. Kovacheva, M. Talianker, O. Haik, J. Grinblat, E.M. Erickson, C. Ghanty, D.T. Major, B. Markovsky, and D. Aurbach, Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy:Zirconium-doped Ni_0.6Co_0.2Mn_0.2O₂, J. Mater. Chem. A, 4(2016), No. 41, p. 16073.
[14]	S. Goriparti, E. Miele, F. De Angelis, E. Di Fabrizio, R.P. Zaccaria, and C. Capiglia, Review on recent progress of nanostructured anode materials for Li-ion batteries, J. Power Sources, 257(2014), p. 421.
[15]	N. Liu, H. Wu, M.T. McDowell, Y. Yao, C. Wang, and Y. Cui, A yolk-shell design for stabilized and scalable Li-ion battery alloy anodes, Nano Lett., 12(2012), No. 6, p. 3315.
[16]	J.H. Kim, H.J. Sohn, H. Kim, G. Jeong, and W. Choi, Enhanced cycle performance of SiO-C composite anode for lithium-ion batteries, J. Power Sources, 170(2007), No. 2, p. 456.
[17]	J.Y. Zhang, C.Q. Zhang, Z. Liu, J. Zheng, Y.H. Zuo, C.L. Xue, C.B. Li, and B.W. Cheng, High-performance ball-milled SiO_x anodes for lithium ion batteries, J. Power Sources, 339(2017), p. 86.
[18]	H.R. Kim, S.G. Woo, J.H. Kim, W. Cho, and Y.J. Kim, Capacity fading behavior of Ni-rich layered cathode materials in Li-ion full cells, J. Electroanal. Chem., 782(2016), p. 168.
[19]	T. Ohzuku, A. Ueda, and M. Nagayama, Electrochemistry and structural chemistry of LiNiO₂ (R3m) for 4 volt secondary lithium batteries, J. Electrochem. Soc., 140(1993), No. 7, p. 1862.
[20]	W. Li, J.N. Reimers, and J.R. Dahn, In situ x-ray diffraction and electrochemical studies of Li_1-xNiO₂, Solid State Ionics, 67(1993), No. 1-2, p. 123.
[21]	H. Arai, S. Okada, H. Ohtsuka, M. Ichimura, and J. Yamaki, Characterization and cathode performance of Li_1-xNi_1+xO₂ prepared with the excess lithium method, Solid State Ionics, 80(1995), No. 3-4, p. 261.
[22]	J. Yang and Y.Y. Xia, Enhancement on cycling stability of the layered Ni-rich oxide cathode by in-situ fabricating nano-thickness cation-mixing layers, J. Electrochem. Soc., 163(2016), No. 13, p. A2665.
[23]	J. Yang and Y.Y. Xia, Suppressing the phase transition of the layered Ni-rich oxide cathode during high-voltage cycling by introducing low-content Li₂MnO₃, ACS Appl. Mater. Interfaces, 8(2016), No. 2, p. 1297.
[24]	J. Yang, M.Y. Hou, S. Haller, Y.G. Wang, C.X. Wang, and Y.Y. Xia, Improving the cycling performance of the layered Ni-rich oxide cathode by introducing low-content Li₂MnO₃, Electrochim. Acta, 189(2016), p. 101.
[25]	J. Park, G.P. Kim, I. Nam, S. Park, and J. Yi, One-pot synthesis of silicon nanoparticles trapped in ordered mesoporous carbon for use as an anode material in lithium-ion batteries, Nanotechnology, 24(2013), No. 2, p. 025602.
[26]	Y.S. Hu, R. Demir-Cakan, M.M. Titirici, J.O.Müller, R. Schlögl, M. Antonietti, and J. Maier, Superior storage performance of a Si@SiO x/C nanocomposite as anode material for lithium-ion batteries, Angew. Chem. Int. Ed., 47(2008), No. 9, p. 1645.
[27]	H.F. Yang, Y. Yan, Y. Liu, F.Q. Zhang, R.Y. Zhang, Y. Meng, M. Li, S.H. Xie, B. Tu, and D.Y. Zhao, A simple melt impregnation method to synthesize ordered mesoporous carbon and carbon nanofiber bundles with graphitized structure from pitches, J. Phys. Chem. B, 108(2004), No. 45, p. 17320.
[28]	C.M. Park, W. Choi, Y. Hwa, J.H. Kim, G. Jeong, and H.J. Sohn, Characterizations and electrochemical behaviors of disproportionated SiO and its composite for rechargeable Li-ion batteries, J. Mater. Chem. 20(2010), No. 23, p. 4854.
[29]	M. Mamiya, H. Takei, M. Kikuchi, and C. Uyeda, Preparation of fine silicon particles from amorphous silicon monoxide by the disproportionation reaction, J. Cryst. Growth, 229(2001), No. 1-4, p. 457.
[30]	I. Choi, M.J. Lee, S.M. Oh, and J.J. Kim, Fading mechanisms of carbon-coated and disproportionate Si/SiO_x negative electrode (Si/SiO_x/C) in Li-ion secondary batteries:Dynamics and component analysis by TEM, Electrochem. Acta, 85(2012), p. 369.
[31]	J.P. Maranchi, A.F. Hepp, A.G. Evans, N.T. Nuhfer, and P.N. Kumta, Interfacial properties of the a Si/Cu:active-inactive thin-film anode system for lithiumion batteries, J. Electrochem. Soc., 153(2006), No. 6, p. A1246.
[32]	A. Konarov, S.T. Myung, and Y.K. Sun, Cathode materials for future electric vehicles and energy storage systems, ACS Energy Lett., 2(2017), No. 3, p. 703.
[33]	K. Eom, T. Joshi, A. Bordes, I. Do, and T.F. Fuller, The design of a Li-ion full cell battery using a nano silicaon and nano multi-layer graphene composite anode, J. Power Sources, 249(2014), p. 118.
[34]	S.E. Trask, K.Z. Pupek, J.A. Gilbert, M. Klett, B.J. Polzin, A.N. Jansen, and D.P. Abraham, Performance of full cells containing carbonate-based LiFSI electrolytes and silicon-graphite negative electrodes, J. Electrochem. Soc. 163(2016), No. 3, p. A345.
[35]	P.F. Zhou, H.J. Meng, Z. Zhang, C.C. Chen, Y.Y. Lu, J. Cao, F.Y. Cheng, and J. Chen, Stable layered Ni-rich LiNi_0.9Co_0.07Al_0.03O₂ microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries, J. Mater. Chem. A, 5(2017), No. 6, p. 2724.
[36]	L.S. Jiao, Z.B. Liu, Z.H. Sun, T.S. Wu, Y.Z. Gao, H.Y. Li, F.H. Li, and L. Niu, An advanced lithium ion battery based on a high quality graphitic graphene anode and a Li[Ni_0.6Co_0.2Mn_0.2] O₂ cathode, Electrochem. Acta, 259(2018), p. 48.
[37]	J.M. Zheng, P.F. Yan, R.G. Cao, H.F. Xiang, M.H. Engelhard, B.J. Polzin, C.M. Wang, J.G. Zhang, and W. Xu, Effects of propylene carbonate content in CsPF₆-containing electrolytes on the enhanced performances of graphite electrode for lithium-ion batteries, ACS Appl. Mater. Interfaces, 8(2016), No. 8, p. 5715.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Lithium-ion full cell with high energy density using nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode and SiO-C composite anode

中文摘要

Lithium-ion full cell with high energy density using nickel-rich LiNi_0.8Co_0.1Mn_0.1O₂ cathode and SiO-C composite anode

Abstract

References

数据统计

Catalog