留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 1
Jan.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  573
  • HTML全文浏览量:  101
  • PDF下载量:  21
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(1): 52-63
V. H. Vargas, I. Mejía, V. H. Baltazar-Hernández, and C. Maldonado, Effect of retained austenite and nonmetallic inclusions on the thermal/electrical properties and resistance spot welding nuggets of Si-containing TRIP steels, Int. J. Miner. Metall. Mater., 26(2019), No. 1, pp. 52-63. https://doi.org/10.1007/s12613-019-1709-9
Cite this article as:
V. H. Vargas, I. Mejía, V. H. Baltazar-Hernández, and C. Maldonado, Effect of retained austenite and nonmetallic inclusions on the thermal/electrical properties and resistance spot welding nuggets of Si-containing TRIP steels, Int. J. Miner. Metall. Mater., 26(2019), No. 1, pp. 52-63. https://doi.org/10.1007/s12613-019-1709-9
shu
引用本文 PDF XML SpringerLink
研究论文

Effect of retained austenite and nonmetallic inclusions on the thermal/electrical properties and resistance spot welding nuggets of Si-containing TRIP steels

  • Metallurgy and Materials Research Institute, Universidad Michoacana de San Nicolás de Hidalgo, Edificio "U", Ciudad Universitaria, 58066-Morelia, Michoacán, México

  • Materials Science and Engineering Program, Autonomous University of Zacatecas, López Velarde 801, 9800-Zacatecas, Zacatecas, México

  • 通讯作者:

    I. Mejía    E-mail: imejia@umich.mx

  • Five advanced high-strength transformation-induced plasticity (TRIP) steels with different chemical compositions were studied to correlate the retained austenite and nonmetallic inclusion content with their physical properties and the characteristics of the resistance spot welding nuggets. Electrical and thermal properties and equilibrium phases of TRIP steels were predicted using the JMatPro© software. Retained austenite and nonmetallic inclusions were quantified by X-ray diffraction and saturation magnetization techniques. The nonmetallic inclusions were characterized by scanning electron microscopy. The results show that the contents of Si, C, Al, and Mn in TRIP steels increase both the retained austenite and the nonmetallic inclusion contents. We found that nonmetallic inclusions affect the thermal and electrical properties of the TRIP steels and that the differences between these properties tend to result in different cooling rates during the welding process. The results are discussed in terms of the electrical and thermal properties determined from the chemical composition and their impact on the resistance spot welding nuggets.
    • Research Article

    Effect of retained austenite and nonmetallic inclusions on the thermal/electrical properties and resistance spot welding nuggets of Si-containing TRIP steels

    + Author Affiliations
      Abstract
    • Five advanced high-strength transformation-induced plasticity (TRIP) steels with different chemical compositions were studied to correlate the retained austenite and nonmetallic inclusion content with their physical properties and the characteristics of the resistance spot welding nuggets. Electrical and thermal properties and equilibrium phases of TRIP steels were predicted using the JMatPro© software. Retained austenite and nonmetallic inclusions were quantified by X-ray diffraction and saturation magnetization techniques. The nonmetallic inclusions were characterized by scanning electron microscopy. The results show that the contents of Si, C, Al, and Mn in TRIP steels increase both the retained austenite and the nonmetallic inclusion contents. We found that nonmetallic inclusions affect the thermal and electrical properties of the TRIP steels and that the differences between these properties tend to result in different cooling rates during the welding process. The results are discussed in terms of the electrical and thermal properties determined from the chemical composition and their impact on the resistance spot welding nuggets.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(43)
    • [1]
      A. Grajcar, M. Różański, M. Kamińska, and B. Grzegorczyk, Study on non-metallic inclusions in laser-welded TRIP-aided Nb-microalloyed steel, Arch. Metall. Mater., 59(2014), No. 3, p. 1163.
      [2]
      L.I. Lin, B.C. De Cooman, R.D. Liu, J. Vleugels, M. Zhang, and S.H. Wen, Design of TRIP steel with high welding and galvanizing performance in light of thermodynamics and kinetics, J. Iron Steel Res. Int., 14(2007), No. 6, p. 37.
      [3]
      A. Mohamadizadeh, A. Zarei-Hanzaki, S. Mehtonen, D. Porter, and M. Moallemi, Effect of intercritical thermomechanical processing on austenite retention and mechanical properties in a multiphase TRIP-assisted steel, Metall. Mater. Trans. A, 47(2016), No. 1, p. 436.
      [4]
      H.L. Yi, Review on δ-transformation-induced plasticity (TRIP) steels with low density:the concept and current progress, JOM, 66(2014), No. 9, p. 1759.
      [5]
      M. Pouranvari and S.P.H. Marashi, Critical review of automotive steels spot welding:process, structure and properties, Sci. Technol. Weld. Joining, 18(2013), No. 5, p. 361.
      [6]
      K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière, Encyclopedia of Materials:Science and Technology, Elsevier, Michigan, 2001, p. 4807.
      [7]
      B.D. Cullity and C.D. Graham, Introduction to Magnetic Materials, 2nd ed., Wiley-IEEE Press, New Jersey, 2008.
      [8]
      M. Amirthalingam, M.J.M. Hermans, L. Zhao, and I.M. Richardson, Quantitative analysis of microstructural constituents in welded transformation-induced-plasticity steels, Metall. Mater. Trans. A, 41(2009), No. 431, p. 430.
      [9]
      M. Amirthalingam, M. Hermans, and I.M. Richardson, Microstructural development during welding of silicon and aluminum based transformation induced plasticity steels-inclusion and elemental partitioning analysis, Metall. Mater. Trans. A, 40(2009), No. 901, p. 901.
      [10]
      E. Girault, P. Jacques, Ph. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, and F. Delannay, Metallographic methods for revealing the multiphase microstructure of TRIP-assisted steels, Mater. Charact., 40(1998), No. 2, p. 111.
      [11]
      L. Zhao, N.H. van Dijk, E. Brück, J. Sietsma, and S. van der Zwaag, Magnetic and X-ray diffraction measurements for the determination of retained austenite in TRIP steels, Mater. Sci. Eng. A, 313(2000), No. 1-2, p. 145.
      [12]
      M. Soliman, B. Weidenfeller, and H. Palkowski, Metallurgical phenomena during processing of cold rolled trip steel, Steel Res. Int., 80(2009), No. 1, p. 57.
      [13]
      O. Matsumura, Y. Sakuma, and H. Takechi, Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel, Trans. Iron Steel Inst. Jpn., 27(1987), No. 7, p. 570.
      [14]
      G. Azizi, H. Mirzadeh, and M.H. Parsa, Dependency of deformation behavior of retained austenite in TRIP steels on microstructural and chemical homogeneity, Acta Metall. Sin. Engl. Lett., 28(2015), No. 10, p. 1272.
      [15]
      H.X. Yin, A.M. Zhao, Z.Z. Zhao, X. Li, S.J. Li, H.J. Hu, and W.G. Xia, Influence of original microstructure on the transformation behavior and mechanical properties of ultra-high-strength TRIP-aided steel, Int. J. Miner. Metall. Mater., 22(2015), No. 3, p. 262.
      [16]
      Z. Li, D. Wu, and J.X. Liu, Effects of austempering on the mechanical properties of the hot rolled Si-Mn TRIP steels, J. Wuhan Univ. Technol., 21(2006), No. 3, p. 21.
      [17]
      I. Tsukatani, S. Hashimoto, and T. Inoue, Effect of silicon and manganese addition on mechanical properties of high-strength hot-rolled sheet steel containing retained austenite, ISIJ Int., 31(1991), No. 9, p. 992.
      [18]
      J.R. Green and D. Margerison, Statistical Treatment of Experimental Data, P.T. Tomkins, eds., Elsevier, Amsterdam, 1978.
      [19]
      A.J. DeArdo, C.I. Garcia, K. Cho, and M. Hua, New method of characterizing and quantifying complex microstructures in steels, Mater. Manuf. Processes, 25(2010), No. 1-3, p. 33.
      [20]
      S. Han, H. Seong, Y. Ahn, C.I. Garcia, A.J. DeArdo, and I. Kim, Effect of alloying elements and coiling temperature on the recrystallization behavior and the bainitic transformation in TRIP steels, Met. Mater. Int., 15(2009), No. 4, p. 521.
      [21]
      M. Radu, J. Valy, A.F. Gourgues, F. Le Strat, and A. Pineau, Continuous magnetic method for quantitative monitoring of martensitic transformation in steels containing metastable austenite, Scripta Mater., 52(2005), No. 6, p. 525.
      [22]
      M.B. Karimi, H. Arabi, A. Khosravani, and J. Samei, Effect of rolling strain on transformation induced plasticity of austenite to martensite in high-alloy austenitic steel, J. Mater. Process. Technol., 203(2008), No. 1-3, p. 349.
      [23]
      A.A. Shatsov and M.G. Latypov, Role of nickel and carbon in concentration-inhomogeneous trip steels, Met. Sci. Heat Treat., 43(2001), No. 5-6, p. 248.
      [24]
      P.J. Jacques, S. Allain, O. Bouaziz, A. De, A.F. Gourgues, B.M. Hance, Y. Houbaert, J. Huang, A. Iza-Mendia, S.E. Kruger, M. Radu, L. Samek, J. Speer, L. Zhao, and S. van der Zwaag, On the measurement of retained austenite in multiphase TRIP steels-results of blind round robin test involving six different technique, Mater. Sci. Technol., 25(2009), No. 5, p. 567.
      [25]
      S. Berveiller, K. Inal, R. Kubler, A. Eberhardt, and E. Patoor, Experimental approach of the martensitic transformation in shape-memory alloys and TRIP steels, J. Phys. IV, 115(2004), p. 261.
      [26]
      M. Gomez, C.I. Garcia, and A.J. Deardo, The role of new ferrite on retained austenite stabilization in Al-TRIP steels, ISIJ Int., 50(2010), No. 1, p. 139.
      [27]
      D. Jandová, R. Divišová, L. Skálová, and J. Drnek, Refinement of steel microstructure by free forging, J. Achiev. Mater. Manuf. Eng., 16(2006), No. 1-2, p. 17.
      [28]
      J. Hidalgo, K.O. Findley, and M.J. Santofimia, Thermal and mechanical stability of retained austenite surrounded by martensite with different degrees of tempering, Mater. Sci. Eng. A, 690(2017), No. 6, p. 337.
      [29]
      S.S.M. Tavares, S.R. Mello, A.M. Gomes, J.M. Neto, M.R. da Silva, and J.M. Pardal, X-ray diffraction and magnetic characterization of the retained austenite in a chromium alloyed high carbon steel, J. Mater. Sci., 41(2005), No. 15, p. 4732.
      [30]
      R.E. Hummel, Electronic Properties of Materials, Springer, New York, 2011.
      [31]
      D.S. Petrovic, Non-oriented electrical steel sheets, Mater. Technol., 44(2010), No. 6, p. 317.
      [32]
      J. Barros, T. Ros-Yañez, L. Vandenbossche, L. Dupré, J. Melkebeek, and Y. Houbaert, The effect of Si and Al concentration gradients on the mechanical and magnetic properties of electrical steel, J. Magn. Magn. Mater., 290-291(2005), p. 1457.
      [33]
      K. Jenkins and M. Lindenmo, Precipitates in electrical steels, J. Magn. Magn. Mater., 320(2008), No. 20. p. 2423.
      [34]
      H. Oikawa, G. Murayama, T. Sakiyama, Y. Takahashi, and T. Ishikawa, Resistance spot weldability of high strength steel (HSS) sheets for automobiles, Nippon Steel Technical Report, No. 95, p. 39.
      [35]
      D. Pereira, T. Clarke, R. Menezes, and T. Hirsch, Effect of microstructure on the electrical conductivity of Inconel 718 alloys, Mater. Sci. Technol., 31(2015), No. 6, p. 669.
      [36]
      P. Beckley and J.E. Thompson, Influence of inclusions on domain-wall motion and power loss in oriented electrical steel, Proc. Inst. Electr. Eng., 117(1970), No. 11, p. 2194.
      [37]
      M.F. Littmann, Iron and silicon-iron alloys, IEEE Trans. Magn. 7(1971), No. 1, p. 48.
      [38]
      T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. DeWitt, Fundamentals of Heat and Mass Transfer, Wiley & Sons, Hoboken, N.J., 2007, p. 70.
      [39]
      H. Ghazanfari and M. Naderi, Expulsion characterization in resistance spot welding by means of a hardness mapping technique, Int. J. Miner. Metall. Mater., 21(2014), No. 9, p. 894.
      [40]
      N. den Uijl, Resistance spot welding of a complicated joint in new advanced high strength steel,[in] Proceedings of the 6th International Seminar on Advances in Resistance Welding, Hamburg, 2010.
      [41]
      A. Grajcar, M. Kamińska, U. Galisz, L. Bulkowski, M. Opiela, and P. Skrzypczyk, Modification of non-metallic inclusions in high-strength steels containing increased Mn and Al contents, J. Achiev. Mater. Manuf. Eng., 55(2012), No. 2, p. 245.
      [42]
      N.J. den Uijl, Thermal and electrical resistance in resistance spot welding,[in] Proceedings of the 17th International Conference on Computer Technology in Welding and Manufacturing, Cranfield, 2008.
      [43]
      M. Pouranvari, H.R. Asgari, S.M. Mosavizadch, P.H. Marashi, and M. Goodarzi, Effect of weld nugget size on overload failure mode of resistance spot welds, Sci. Technol. Weld. Joining, 12(2007), No. 3, p. 217.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计