留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 4
Apr.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  484
  • HTML全文浏览量:  79
  • PDF下载量:  10
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(4): 516-522
N. Dandapat and S. Ghosh, Development of non-shrinkable ceramic composites for use in high-power microwave tubes, Int. J. Miner. Metall. Mater., 26(2019), No. 4, pp. 516-522. https://doi.org/10.1007/s12613-019-1759-z
Cite this article as:
N. Dandapat and S. Ghosh, Development of non-shrinkable ceramic composites for use in high-power microwave tubes, Int. J. Miner. Metall. Mater., 26(2019), No. 4, pp. 516-522. https://doi.org/10.1007/s12613-019-1759-z
shu
引用本文 PDF XML SpringerLink
研究论文

Development of non-shrinkable ceramic composites for use in high-power microwave tubes

  • Bioceramics and Coating Division, CSIR-Central Glass and Ceramic Research Institute, Kolkata 700032, India

  • 通讯作者:

    S. Ghosh    E-mail: sumana@cgcri.res.in

  • Al2O3-CaO-SiC-based ceramic composites with four different compositions were sintered at 1700℃ for 3 h in an air furnace. The phase analysis, microstructural characterization, and elemental composition determination of the developed composites were performed by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray (EDAX) analysis, respectively. The shrinkage, thermal properties, and electrical resistivity of the composites were also studied. The experimental results showed the effects of adding silicon carbide and calcia to alumina on the thermal, electrical, and shrinkage properties of the resultant composites. Among the four investigated ceramic composites, the one composed of 99wt% alumina, 0.5wt% CaO, and 0.5wt% SiC exhibited the best characteristics for use as a potting material in a dispenser cathode of a microwave tube. The material exhibited slight expansion instead of shrinkage during drying or firing. Other properties of the composite powder, such as its thermal properties and electrical resistivity, were comparable to those of a commercial alumina powder.
    • Research Article

    Development of non-shrinkable ceramic composites for use in high-power microwave tubes

    + Author Affiliations
      Abstract
    • Al2O3-CaO-SiC-based ceramic composites with four different compositions were sintered at 1700℃ for 3 h in an air furnace. The phase analysis, microstructural characterization, and elemental composition determination of the developed composites were performed by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray (EDAX) analysis, respectively. The shrinkage, thermal properties, and electrical resistivity of the composites were also studied. The experimental results showed the effects of adding silicon carbide and calcia to alumina on the thermal, electrical, and shrinkage properties of the resultant composites. Among the four investigated ceramic composites, the one composed of 99wt% alumina, 0.5wt% CaO, and 0.5wt% SiC exhibited the best characteristics for use as a potting material in a dispenser cathode of a microwave tube. The material exhibited slight expansion instead of shrinkage during drying or firing. Other properties of the composite powder, such as its thermal properties and electrical resistivity, were comparable to those of a commercial alumina powder.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(24)
    • [1]
      L. Wolverton, J.O. Tarter, Thermal, R.E. Eitel, M. Weisenberger, and C. Dowden, Properties of alumina cathode heater potting materials,[in] International Vacuum Electronics Conference (IVEC), IEEE International, USA, 2010, p. 165.
      [2]
      R.B. True, M.F. Kirshner, L. Turek, G.R. Good, R.J. Hanse, T.M. Bemis, and R.J. Bartkowski, Dispenser cathode high power gridded klystron gun,[in] International Vacuum Electronics Conference (IVEC), IEEE International, USA, 2004, p. 328.
      [3]
      T.J. Grant and L.R. Falce, Impact of dispenser cathode thickness on useful operating life, [in] International Vacuum Electronics Conference (IVEC), IEEE International, USA, 2004, p. 305.
      [4]
      V.B. Shields, Applications of silicon carbide for high temperature electronics and sensors, NASA Jet Propulsion Laboratory, Tech Briefs, 20(1996), p. 55.
      [5]
      P. Swartzentruber, M. Collier, R. Dewees, W. Epperson, C. Poole, B. Rupp, D. Bowling, E. Fadde, A. Floyd, P. Rottmann, R. Wilson, T.J. Balk, S. Roberts, J. Tarter, and M. Effgen, Alternative ceramic potting materials for dispenser cathodes,[in] International Vacuum Electronics Conference (IVEC), IEEE International, USA, 2012, p. 483.
      [6]
      R.K. Barik, A. Bera, R.S. Raju, A.K. Tanwar, I.K. Baek, S.H. Min, O.J. Kwon, M.A. Sattorov, K.W. Lee, and G.S. Park, Development of alloy-film coated dispenser cathode for terahertz vacuum electron devices application, Appl. Surf. Sci., 276(2013), p. 817.
      [7]
      R. Bhattacharya, H. Khatun, N.K. Singh, U. Singh, and A.K. Sinha, Design of cathode heater assembly for high power gyrotron, Frequenz, 67(2013), No. 5-6, p. 163.
      [8]
      D. Pedrini, T. Misuri, F. Paganucci, and M. Andrenucci, Development of hollow cathodes for space electric propulsion at Sitael, Aerospace, 4(2017), No. 2, p. 26.
      [9]
      L. Ives, G. Miram, M. Read, M. Mizuhara, P. Borchard, L. Falce, and K. Gunther, Development of improved cathodes for high power RF sources,[in] Proceedings of the Particle Accelerator Conference, IEEE International, USA, 2003, p. 1113.
      [10]
      C.D. Marchewka, Non-Uniform Emission Studies of a Magnetron Injection Gun [Dissertation], Massachusetts Institute of Technology (MIT), USA, 2006, p. 1.
      [11]
      A.S. Gilmour, Jr., Microwave Tubes, Artech House, Boston, 1986, p. 733.
      [12]
      D.F. Simmons, C.M. Fortgang, and D.B. Holtkamp, Using multispectral imaging to measure temperature profiles and emissivity of large thermionic dispenser cathodes, Rev. Sci. Instrum., 76(2005), No. 4, art. No. 044901.
      [13]
      D.J. Kaczynski and K. A. Walsh, Beryllium Oxide,[in] Conference of Raw Materials for Advanced and Engineered Ceramics, 6(1985), No. 9-10, p. 1261.
      [14]
      T.V. Thamaraiselvi and S.S. Rajeswari, Biological evaluation of bioceramic materials-A review trends, Trends Biomater. Artif. Organs, 18(2004), No. 1, p. 9.
      [15]
      O.S.S. Lamba, S.C. Nangru, L.M. Joshi, A. Sharma, V.P. Singh, and N.C. Gupta, Choice of alumina ceramics for 5MW pulsed power klystron, Indian J. Eng. Mater. S., 7(2000), No. 5, p. 443.
      [16]
      S. Roberts, Sources of temperature variance in dispenser cathodes,[in] International Vacuum Electronics Conference (IVEC), IEEE International, USA, 2004, p. 299.
      [17]
      C.W. Park and D.Y. Yoon, Effects of SiO2, CaO2, and MgO additions on the grain growth of alumina, J. Am. Ceram. Soc., 83(2000), No. 10, p. 2605.
      [18]
      K.S. Pal, S. Ghosh, N. Dandapat, S. Datta, D. Basu, and R.S. Raju, Development of suitable potting material for dispenser cathodes of a high power microwave tube, Mater. Sci. Eng. B, 177(2012), No. 2, p. 228.
      [19]
      P. Swartzentruber, M. Collier, R. DeWees, W. Epperson, C. Poole, B. Rupp, D. Bowling, E. Fadde, A. Floyd, P. Rottmann, R. Wilson, T.J. Balk, S. Roberts, J. Tarter, and M. Effgen, Alternative ceramic potting materials for dispenser cathodes,[in] International Vacuum Electronics Conference (IVEC), 2012, IEEE International, Monterey, CA, USA, p. 483.
      [20]
      A. Kisko, J. Talonen, D.A. Porter, and L.P. Karjalainen, Effect of Nb microalloying on reversion and grain growth in a high-Mn 204Cu austenitic stainless steel, ISIJ Int., 55(2015), No. 10, p. 2217.
      [21]
      S. Miao, Z.M. Xie, L.F. Zeng, T. Zhang, X.P. Wang, Q.F. Fang, and C.S. Liu, Mechanical properties, thermal stability and microstructure of fine-grained W-0.5wt% TaC alloys fabricated by an optimized multi-step process, Nucl. Mater. Energy, 13(2017), p. 12.
      [22]
      G.E. Jr., Oxidation behavior of silicon carbide, J. Am. Ceram. Soc., 41(1958), No. 9, p. 347.
      [23]
      L.U.J.T. Ogbuji and M. Singh, High-temperature oxidation behavior of reaction-formed silicon carbide ceramics, J. Mater. Res., 10(1995), No. 12, p. 3232.
      [24]
      A. Theerapapvisetpong, S. Jiemsirilers, P. Thavorniti, and R. Conradt, Barium-free glass-ceramic sealants from the system CaO-MgO-B2O3-Al2O3-SiO2 for application in the SOFC, Mater. Sci. Forum, 695(2011), p. 1.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计