Cite this article as: |
C. D. Gómez-Esparza, R. Peréz-Bustamante, J. M. Alvarado-Orozco, J. Muñoz-Saldaña, R. Martínez-Sánchez, J. M. Olivares-Ramírez, and A. Duarte-Moller, Microstructural evaluation and nanohardness of an AlCoCuCrFeNiTi high-entropy alloy, Int. J. Miner. Metall. Mater., 26(2019), No. 5, pp. 634-641. https://doi.org/10.1007/s12613-019-1771-3 |
C. D. Gómez-Esparza E-mail: cynthia.gomez@cimav.edu.mx
[1] |
J.W. Yeh, S.K. Chen, J.Y. Gan, S.J. Lin, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang, Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements, Metall. Mater. Trans. A, 35(2004), p. 2533.
|
[2] |
S.T. Chen, W.Y. Tang, Y.F. Kuo, S.Y. Chen, C.H. Tsau, T.T. Shun, and J.W. Yeh, Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys, Mater. Sci. Eng. A, 527(2010), No. 21-22, p. 5818.
|
[3] |
R. Sriharitha, B.S. Murty, and R.S. Kottada, Phase formation in mechanically alloyed AlxCoCrCuFeNi (x=0.45, 1, 2.5, 5 mol) high entropy alloys, Intermetallics, 32(2013), p. 119.
|
[4] |
N.T.B.N. Koundinya, C.S. Babu, K. Sivaprasad, P. Susila, N.K. Babu, and J. Baburao, Phase evolution and thermal analysis of nanocrystalline AlCrCuFeNiZn high entropy alloy produced by mechanical alloying, J. Mater. Eng. Perform., 22(2013), No. 10, p. 3077.
|
[5] |
Y.F. Wang, S.G. Ma, X.H. Chen, J.Y. Shi, Y. Zhang, and J.W. Qiao, Optimizing mechanical properties of AlCoCrFeNiTix high-entropy alloys by tailoring microstructures, Acta Metall. Sin.-Engl., 26(2013), No. 3, p. 277.
|
[6] |
P. Cui, Y.M. Ma, L.J. Zhang, M.D. Zhang, J.T. Fan, W.Q. Dong, P.F. Yu, G. Li, and R.P. Liu, Effect of Ti on microstructures and mechanical properties of high entropy alloys based on CoFeMnNi system, Mater. Sci. Eng. A, 737(2018), No. 8, p. 198.
|
[7] |
W.Y. Yan, C.L. Pun, and G.P. Simon, Conditions of applying Oliver-Pharr method to the nanoindentation of particles in composites, Compos. Sci. Technol., 72(2012), No. 10, p. 1147.
|
[8] |
C.S. Babu, N.T.B.N. Koundinya, K. Sivaprasad, and J.A. Szpunar, Thermal analysis and nanoindentaion studies on nanocrystalline AlCrNiFeZn high entropy alloy, Procedia Mater. Sci., 6(2014), p. 641.
|
[9] |
V. Maier-Kiener, B. Schuh, E.P. George, H. Clemens, and A. Hohenwarter, Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys, Mater. Des., 115(2017), p. 479.
|
[10] |
C.M. Lin and H.L. Tsai, Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy, Intermetallics, 19(2011), No. 3, p. 288.
|
[11] |
Y.L. Chen, Y.H. Hu, C.W. Tsai, J.W. Yeh, S.K. Chen, and S.Y. Chang, Structural evolution during mechanical milling and subsequent annealing of Cu-Ni-Al-Co-Cr-Fe-Ti alloys, Mater. Chem. Phys., 118(2009), No. 2-3, p. 354.
|
[12] |
Z.G. Zhu, K.H. Ma, Q. Wang, and C.H. Shek, Compositional dependence of phase formation and mechanical properties in three CoCrFeNi-(Mn/Al/Cu) high entropy alloys, Intermetallics, 79(2016), p. 1.
|
[13] |
C.D. Gómez-Esparza, K. Campos-Venegas, O. Solis-Canto, J.M. Alvarado-Orozco, J. Muñoz-Saldaña, J.M. Herrera-Ramírez, and R. Martínez-Sánchez, Nanohardness and microstructure of NiCoAlFeCu and NiCoAlFeCuCr alloys produced by mechanical alloying, Microsc. Microanal., 20(2014), No. S3, p. 2106.
|
[14] |
T.T. Shun and Y.C. Du, Age hardening of the Al0.3CoCrFeNiC0.1 high entropy alloy, J. Alloys Compd., 478(2009), No. 1-2, p. 269.
|
[15] |
B.S. Li, Y.P. Wang, M.X. Ren, C. Yang, and H.Z. Fu, Effects of Mn, Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy alloy, Mater. Sci. Eng. A, 498(2008), No. 1-2, p. 482.
|
[16] |
H.F. Sheng, M. Gong, and L.M. Peng, Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions, Mater. Sci. Eng. A, 567(2013), p. 14.
|
[17] |
Y. Ma, B.B. Jiang, C.L. Li, Q. Wang, C. Dong, P.K. Liaw, F. Xu, and L.X. Sun, The BCC/B2 morphologies in AlxNiCoFeCr high-entropy alloys, Metals, 7(2017), No. 2, p. 57.
|
[18] |
M.R. Chen, S.J. Lin, J.W. Yeh, S.K. Chen, Y.S. Huang, and C.P. Tu, Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0-2.0) high-entropy alloys, Mater. Trans., 47(2006), No. 5, p. 1395.
|
[19] |
K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang. S.W. Lee, and K. Niihara, Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying, J. Alloys Compd., 495(2010), No. 1, p. 33.
|
[20] |
K.B. Zhang, Z.Y. Fu, J.Y. Zhang, W.M. Wang, H. Wang, Y.C. Wang, Q.J. Zhang, and J. Shi, Microstructure and mechanical properties of CoCrFeNiTiAlx high-entropy alloys, Mater. Sci. Eng. A, 508(2009), No. 1-2, p. 214.
|
[21] |
P. Malinovskis, S. Fritze, L. Riekehr, L. von Fieandt, J. Cedervall, D. Rehnlund, L. Nyhol, E. Lewin, and U. Jansson, Synthesis and characterization of multicomponent (CrNbTaTiW) C films for increased hardness and corrosion resistance, Mater. Des., 149(2018), p. 51.
|
[22] |
C.D. Gómez-Esparza, J. Camarillo-Cisneros, I. Estrada-Guel, J.G. Cabañas-Moreno, J.M. Herrera-Ramírez, and R. Martínez-Sánchez, Effect of Cr, Mo and Ti on the microstructure and Vickers hardness of multi-component systems, J. Alloys Compd., 615(2014), No. Supplement 1, p. S638.
|
[23] |
Y.J. Zhou, Y. Zhang, F.J. Wang, Y.L. Wang, and G.L. Chen, Effect of Cu addition on the microstructure and mechanical properties of AlCoCrFeNiTi0.5 solid-solution alloy, J. Alloys Compd., 466(2008), No. 1-2, p. 201.
|
[24] |
S. Guo, C. Ng, and C.T. Liu, Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys, J. Alloys Compd., 557(2013), p. 77.
|
[25] |
G. Arzpeyma, A.E. Gheribi, and M. Medraj, On the prediction of Gibbs free energy of mixing of binary liquid alloys, J. Chem. Thermodyn., 57(2013), p. 82.
|
[26] |
S. Guo, Q. Hu, C. Ng, and C.T. Liu, More than entropy in high-entropy alloys:Forming solid solutions or amorphous phase, Intermetallics, 41(2013), p. 96.
|
[27] |
D.B. Miracle and O.N. Senkov, A critical review of high entropy alloys and related concepts, Acta Mater., 122(2017), p. 448.
|
[28] |
C.J. Tong, M.R. Chen, J.W. Yeh, S.J. Lin, S.K. Chen, T.T. Shun, and S.Y. Chang, Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements, Metall. Mater. Trans. A, 36(2005), p. 1263.
|