Electrical conductivity of molten LiF-DyF3-Dy2O3-Cu2O system for Dy-Cu intermediate alloy production

Shu-mei Chen; Chun-fa Liao; Jue-yuan Lin; Bo-qing Cai; Xu Wang; Yun-fen Jiao

doi:10.1007/s12613-019-1775-z

Volume 26 Issue 6

Jun. 2019

Turn off MathJax

数据统计

计量

文章访问数: 512
HTML全文浏览量: 91
PDF下载量: 12
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2019 > 26(6): 701-709

Shu-mei Chen, Chun-fa Liao, Jue-yuan Lin, Bo-qing Cai, Xu Wang, and Yun-fen Jiao, Electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O system for Dy-Cu intermediate alloy production, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 701-709. https://doi.org/10.1007/s12613-019-1775-z

Cite this article as:

Shu-mei Chen, Chun-fa Liao, Jue-yuan Lin, Bo-qing Cai, Xu Wang, and Yun-fen Jiao, Electrical conductivity of molten LiF-DyF3-Dy2O3-Cu2O system for Dy-Cu intermediate alloy production, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 701-709. https://doi.org/10.1007/s12613-019-1775-z

Citation:

PDF( 824 KB)

引用本文 PDF XML SpringerLink

研究论文

Electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O system for Dy-Cu intermediate alloy production

Institute of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China

通讯作者:
Chun-fa Liao E-mail: Liaochfa@163.com

中文摘要

Dy-Cu intermediate alloys have shown substantial potential in the field of magnetostrictive and magnetic refrigerant materials. Therefore, this study focused on investigating the electrical conductivity of molten-salt systems for the preparation of Dy-Cu alloys and on optimizing the corresponding operating parameters. The electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O systems was measured from 910 to 1030℃ using the continuously varying cell constant method. The dependencies of the LiF-DyF₃-Dy₂O₃-Cu₂O system conductivity on the melt composition and temperature were examined herein. The optimal operating conditions for Dy-Cu alloy production were determined via analyses of the electrical conductivity and activation energies for conductance, which were calculated using the Arrhenius equation. The conductivity of the molten system regularly increases with increasing temperature and decreases with increasing concentration of Dy₂O₃ or Cu₂O or both. The activation energy E_κ of the LiF-DyF₃-Dy₂O₃ and LiF-DyF₃-Cu₂O molten-salt systems increases with increasing Dy₂O₃ or Cu₂O content. The regression functions of conductance as a function of temperature (t) and the addition of Dy₂O₃ (W(Dy₂O₃)) and Cu₂O (W(Cu₂O)) can be expressed as κ=-2.08435 + 0.0068t-0.18929W(Dy₂O₃)-0.07918W(Cu₂O). The optimal electrolysis conditions for preparing the Dy-Cu alloy in LiF-DyF₃-Dy₂O₃-Cu₂O molten salt are determined to be 2.0wt% ≤ W(Dy₂O₃) + W(Cu₂O) ≤ 3.0wt% and W(Dy₂O₃):W(Cu₂O)=1:2 at 970 to 1000℃.

关键词:

Research Article

Electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O system for Dy-Cu intermediate alloy production

+ Author Affiliations

Abstract

Abstract

Dy-Cu intermediate alloys have shown substantial potential in the field of magnetostrictive and magnetic refrigerant materials. Therefore, this study focused on investigating the electrical conductivity of molten-salt systems for the preparation of Dy-Cu alloys and on optimizing the corresponding operating parameters. The electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O systems was measured from 910 to 1030℃ using the continuously varying cell constant method. The dependencies of the LiF-DyF₃-Dy₂O₃-Cu₂O system conductivity on the melt composition and temperature were examined herein. The optimal operating conditions for Dy-Cu alloy production were determined via analyses of the electrical conductivity and activation energies for conductance, which were calculated using the Arrhenius equation. The conductivity of the molten system regularly increases with increasing temperature and decreases with increasing concentration of Dy₂O₃ or Cu₂O or both. The activation energy E_κ of the LiF-DyF₃-Dy₂O₃ and LiF-DyF₃-Cu₂O molten-salt systems increases with increasing Dy₂O₃ or Cu₂O content. The regression functions of conductance as a function of temperature (t) and the addition of Dy₂O₃ (W(Dy₂O₃)) and Cu₂O (W(Cu₂O)) can be expressed as κ=-2.08435 + 0.0068t-0.18929W(Dy₂O₃)-0.07918W(Cu₂O). The optimal electrolysis conditions for preparing the Dy-Cu alloy in LiF-DyF₃-Dy₂O₃-Cu₂O molten salt are determined to be 2.0wt% ≤ W(Dy₂O₃) + W(Cu₂O) ≤ 3.0wt% and W(Dy₂O₃):W(Cu₂O)=1:2 at 970 to 1000℃.
- electrical conductivity;
- molten salt;
- Dy-Cu alloy;
- dysprosium oxide;
- cuprous oxide

FullText(HTML)

Supplements(0)

References(22)

References

[1]	S.M. Pang, Z.Q. Wang, L. Zhou, B.Y. Chen, L.H. Xu, B. Zhao, S.H. Yan, and Z.A. Li, Study on preparation of high-purified terbium and dysprosium metals used for rare earth giant magnetostrictive materials, Chin. Rare Earths, 29(2008), No. 6, p. 31.
[2]	F.D. Liu, Y. Su, Y.Q. Chen, Y.F. Xiong, and X.F. Yi, Investigation and development of NdFeB magnets with excellent magnetic properties and stability of temperature, Met. Funct. Mater., 17(2010), No. 3, p. 5.
[3]	L.Q. Yu, X.G. Cui, W. Luo, and M. Yan, Influence of Cu and Gd on thermal stability and magnetic properties of Nd(DyAl)FeB magnets, J. Zhejiang Univ. Eng. Sci., 39(2005), No. 8, p. 1251.
[4]	S.M. Pang, S.H. Yan, Z.A. Li, D.H. Chen, L.H. Xu, and B. Zhao, Development on molten salt electrolytic methods and technology for preparing rare earth metals and alloys in China, Chin. J. Rare Met., 35(2011), No. 3, p. 440.
[5]	G.K. Liu, Y.X. Tong, H.C. Hong, S.Y. Chen, and L. Gan, Studies on the preparation of Dy-Cu alloy in chloride melt by molten salt electrolysis, Acta Metall. Sinica, 32(1996), No. 12, p. 1252.
[6]	A. Saïla, M. Gibilaro, L. Massot, P. Chamelot, P. Taxil, and A.M. Affoune, Electrochemical behavior of dysprosium( ) Ⅲ in LiF-CaF₂ on Mo, Ni and Cu electrodes, J. Electroanal. Chem., 642(2010), No. 2, p. 150.
[7]	H. Konishi, H. Ono, E. Takeuchi, T. Nohira, and T. Oishi, Electrochemical formation of RE-Cu (RE = Dy, Nd) alloys in a molten LiCl-KCl system, ECS Trans., 53(2013), No. 11, p. 37.
[8]	K.S. Mohandas, N. Sanil, and P. Rodriguez, Development of a high temperature conductance cell and electrical conductivity measurements of MAlCl₄(M = Li, Na and K) melts, Miner. Process. Extr. Metall., 115(2006), No. 1, p. 25.
[9]	H.M. Kan, Z.W. Wang, Y.G. Ban, Z.N. Shi, and Z.X. Qiu, Electrical conductivity of Na₃AlF₆-AlF₃-Al₂O₃-CaF₂-LiF(NaCl) system electrolyte, Trans. Nonferrous Met. Soc. China, 17(2007), No. 1, p. 181.
[10]	L.Y. Chen, Research on Physical and Chemical Properties of LiF-NdF₃-Nd₂O₃ Molten Salt System [Dissertation], East China University of Science and Technology, Shanghai, 2015, p. 2.
[11]	X.J. Lv, S.Y. Chen, Z.L. Tian, Y.Q. Lai, and J. Li, Review on the physical-chemical properties of the Na₃AlF₆-K₃AlF₆-AlF₃ molten salt system, Light Met., 2013, No. 8, p. 29.
[12]	V. Daněk, Physical and Chemical Analysis of Molten Electrolyte, B.L. Gao, X.W. Hu, Z.N. Shi, and Z.W. Wang, translated, Metallurgical Industry Press, Beijing, 2014, p. 54.
[13]	X.W. Hu, Z.W. Wang, B.L. Gao, and Z.N. Shi, Study on the electrical conductivity of NdF₃-LiF-Nd₂O₃ system melts determined by CVCC technique, J. Northeastern Univ. Nat. Sci., 29(2008), No. 9, p. 1294.
[14]	Q.S. Wu, Electrical conductivity and neodymium solubility of Nd₂O₃-NdF₃-LiF fusion salt system, Rare Met. Cem. Carbides, 34(2006), No. 1, p. 52.
[15]	C.F. Liao, H. Tang, X. Wang, L.S. Luo, and M.Z. Fang, Study on electrical conductivity of Na₃AlF₆-AlF₃-LiF-MgF₂-Al₂O₃-Nd₂O₃-CuO molten salt system, Rare Met. Cem. Carbides, 44(2016), No. 1, p. 60.
[16]	M. Bao, Z.W. Wang, B.L. Gao, Z.N. Shi, X.W. Hu, and J.Y. Yu, Electrical conductivity of NaF-AlF₃-Al₂O₃-CaF₂-ZrO₂ molten salts, Trans. Nonferrous Met. Soc. China, 23(2013), No. 12, p. 3788.
[17]	C.F. Liao, Y.F. Jiao, X. Wang, B.Q. Cai, Q.C. Sun, and T. Hao, Electrical conductivity optimization of the Na₃AlF₆-Al₂O₃-Sm₂O₃ molten salts system for Al-Sm intermediate binary alloy production, Int. J. Miner. Metall. Mater., 24(2017), No. 9, p. 1034.
[18]	K. Grjotheim, R. Nikolic, and H.A. Øye, Electrical conductivities of binary and ternary melts between MgCl₂, CaCl₂, NaCl, and KCl, Acta Chem. Scand., 24(1970), No. 2, p. 489.
[19]	R. Guo. Study of Al–Sc Alloy Prepared by Molten Salt Electrolysis Method [Dissertation], Northeastern University, Shenyang, 2009, p. 27.
[20]	X.F. He, Y.G. Li, and Z.H. Li, Research on conductivity of KCl-NaCl-NaF-SiO₂ molten salt system, Hydrometall. China, 29(2010), No. 1, p. 12.
[21]	X. Guo, J. Sietsma, and Y.X. Yang, A critical evaluation of solubility of rare earth oxides in molten fluorides,[in] I.B.D. Lima, and W.L. Filho eds., Rare Earths Industry: Technological, Economic and Environmental Implications, Elsevier, 2015, p. 223-234.
[22]	B.L. Gao, F.G. Liu, Z.W. Wang, and Z.N. Shi, Study on electrical conductivity of the molten salts of KNO₃-NaNO₂-NaNO₃ ternary system, J. Northeastern Univ. Nat. Sci., 31(2010), No. 5, p. 696.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O system for Dy-Cu intermediate alloy production

中文摘要

Electrical conductivity of molten LiF-DyF₃-Dy₂O₃-Cu₂O system for Dy-Cu intermediate alloy production

Abstract

References

数据统计

Catalog