留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 6
Jun.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  710
  • HTML全文浏览量:  186
  • PDF下载量:  23
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(6): 740-751
Gao-jie Li, Ming-xing Guo, Yu Wang, Cai-hui Zheng, Ji-shan Zhang,  and Lin-zhong Zhuang, Effect of Ni addition on microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys with a high Mg/Si ratio, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 740-751. https://doi.org/10.1007/s12613-019-1778-9
Cite this article as:
Gao-jie Li, Ming-xing Guo, Yu Wang, Cai-hui Zheng, Ji-shan Zhang,  and Lin-zhong Zhuang, Effect of Ni addition on microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys with a high Mg/Si ratio, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 740-751. https://doi.org/10.1007/s12613-019-1778-9
shu
引用本文 PDF XML SpringerLink
研究论文

Effect of Ni addition on microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys with a high Mg/Si ratio

  • State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

  • 通讯作者:

    Ming-xing Guo    E-mail: mingxingguo@skl.ustb.edu.cn

  • The effect of adding 0.03wt% Ni on the microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys was systematically studied. The results reveal that the number density of spherical Fe-rich phases within grains increases with the addition of Ni, accompanied by the formation of Q (Al3Mg9Si7Cu2) precipitates around the spherical Fe-rich phases. Additionally, Ni addition is beneficial to reducing the grain size in the as-cast state. During the homogenization process, Q phases could be completely dissolved and the grain size could remain basically unchanged. However, compared with the Ni-free alloy, the Fe-rich phase in the Ni-containing alloy is more likely to undergo the phase transformation and further form more spherical particles during homogenization treatment. After thermomechanical processing, the distribution of Fe-rich phases in the Ni-containing alloy was further greatly improved and directly resulted in a greater formability than that of the Ni-free alloy. Accordingly, a reasonable Ni addition positively affected the microstructure and formability of the alloys.
    • Research Article

    Effect of Ni addition on microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys with a high Mg/Si ratio

    + Author Affiliations
      Abstract
    • The effect of adding 0.03wt% Ni on the microstructure and mechanical properties of Al-Mg-Si-Cu-Zn alloys was systematically studied. The results reveal that the number density of spherical Fe-rich phases within grains increases with the addition of Ni, accompanied by the formation of Q (Al3Mg9Si7Cu2) precipitates around the spherical Fe-rich phases. Additionally, Ni addition is beneficial to reducing the grain size in the as-cast state. During the homogenization process, Q phases could be completely dissolved and the grain size could remain basically unchanged. However, compared with the Ni-free alloy, the Fe-rich phase in the Ni-containing alloy is more likely to undergo the phase transformation and further form more spherical particles during homogenization treatment. After thermomechanical processing, the distribution of Fe-rich phases in the Ni-containing alloy was further greatly improved and directly resulted in a greater formability than that of the Ni-free alloy. Accordingly, a reasonable Ni addition positively affected the microstructure and formability of the alloys.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(52)
    • [1]
      J. Hirsch and T. Al-Samman, Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications, Acta Mater., 61(2013), No. 3, p. 818.
      [2]
      M.X. Guo, Y.D. Zhang, G.J. Li, S.B. Jin, G. Sha, J.S. Zhang, L.Z. Zhuang, and E.J. Lavernia, Solute clustering in Al-Mg-Si-Cu-(Zn) alloys during aging, J. Alloys Compd., 774(2019), p. 347.
      [3]
      M.X. Guo, G. Sha, L.Y. Cao, W.Q. Liu, J.S. Zhang, and L.Z. Zhuang, Enhanced bake-hardening response of an Al–Mg–Si–Cu alloy with Zn addition, Mater. Chem. Phys., 162(2015), p. 15.
      [4]
      X.F. Wang, M.X. Guo, Y. Zhang, H. Xing, Y. Li, J.R. Luo, J.S. Zhang, and L.Z. Zhuang, The dependence of microstructure, texture evolution and mechanical properties of Al-Mg-Si-Cu alloy sheet on final cold rolling deformation, J. Alloys Compd., 657(2016), p. 906.
      [5]
      M.H. Farshidi, M. Rifai, and H. Miyamoto, Microstructure evolution of a recycled Al–Fe–Si–Cu alloy processed by tube channel pressing, Int. J. Miner. Metall. Mater., 25(2018), No. 10, P. 1166.
      [6]
      A.I. Taub, P.E. Krajewski, A.A. Luo, and J.N. Owens, The evolution of technology for materials processing over the last 50 years: The automotive example, JOM, 59(2007), No. 2, p. 48.
      [7]
      R.P. Garrett, J. Lin, and T.A. Dean, An investigation of the effects of solution heat treatment on mechanical properties for AA 6xxx alloys: experimentation and modelling, Int. J. Plast., 21(2005), No. 8, p. 1640.
      [8]
      A. Cuniberti, A. Tolley, M.V.C. Riglos, and R. Giovachini, Influence of natural aging on the precipitation hardening of an AlMgSi alloy, Mater. Sci. Eng. A, 527(2010), No. 20, p. 5307.
      [9]
      M.X. Guo, G.J. Li, Y.D. Zhang, G. Sha, J.S. Zhang, L.Z. Zhuang, and E.J. Lavernia, Influence of Zn on the distribution and composition of heterogeneous solute-rich features in peak aged Al-Mg-Si-Cu alloys, Scr. Mater., 159(2019), p. 5.
      [10]
      S. Koch and H. Antrekowitsch, Alloying behaviour of Cu, Mg and Mn in lead-free Al-Cu based alloys intended for free machining, BHM Berg-Huttenmann. Monatsh., 156(2011), No. 1, p. 22.
      [11]
      T. Lu, Y. Pan, J.L. Wu, S.W. Tao, and Y. Chen, Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys, Int. J. Miner. Metall. Mater., 22(2015), No. 4, p. 405.
      [12]
      Y. Meng, J.Z. Cui, Z.H. Zhao, and Y.B. Zuo, Effect of vanadium on the microstructures and mechanical properties of an Al-Mg-Si-Cu-Cr-Ti alloy of 6XXX series, J. Alloys Compd., 573(2013), p. 102.
      [13]
      Y. Meng, J.Z. Cui, Z.H. Zhao, and L.Z. He, Effect of Zr on microstructures and mechanical properties of an Al-Mg-Si-Cu-Cr alloy prepared by low frequency electromagnetic casting, Mater. Charact., 92(2014), No. 6, p. 138.
      [14]
      L.Z. He, Y.H. Cao, Y.Z. Zhou, and J.Z. Cui, Effects of Ag addition on the microstructures and properties of Al–Mg–Si–Cu alloys, Int. J. Miner. Metall. Mater., 25(2018), No. 1, p. 62.
      [15]
      S. Haro-Rodríguez, R.E. Goytia-Reyes, D.K. Dwivedi, V.H. Baltazar-Hernández, H. Flores-Zúñiga, and M.J. Pérez-López, On influence of Ti and Sr on microstructure, mechanical properties and quality index of cast eutectic Al-Si-Mg alloy, Mater. Des., 32(2011), No. 4, p. 1865.
      [16]
      Q. Chen, Q.L. Pan, Y. Wang, Z.Y. Zhang, J. Zhou, and C. Liu, Microstructure and mechanical properties of Al-5.8Mg-Mn-Sc-Zr alloy after annealing treatment, J. Cent. South Univ., 19(2012), No. 7, p. 1785.
      [17]
      X. Lu, L.H. Zhao, L.P. Zhu, B. Zhang, and X.H. Qu, High-temperature mechanical properties and deformation behavior of high Nb containing TiAl alloys fabricated by spark plasma sintering, Int. J. Miner. Metall. Mater., 19(2012), No. 4, p. 354.
      [18]
      T. Liu, C.N. He, G. Li, X. Meng, C.S. Shi, and N.Q. Zhao, Microstructural evolution in Al-Zn-Mg-Cu-Sc-Zr alloys during short-time homogenization, Int. J. Miner. Metall. Mater., 22(2015), No. 5, p. 516.
      [19]
      H.Z. Li, X.P. Liang, F.F. Li, F.F. Guo, Z. Li, and X.M. Zhang, Effect of Y content on microstructure and mechanical properties of 2519 aluminum alloy, Trans. Nonferrous Met. Soc. China, 17(2007), No. 6, p. 1194.
      [20]
      M. Kadi-Hanifi and K. Tirsatine, Influence of Cd and Sn on the kinetics of the GP zones formation in Al-Zn-Mg, Mater. Sci. Forum, 331(2000), p. 1067.
      [21]
      R.N. Wilson and P.J.E. Forsyth, Effects of Additions of 1% Iron and 1% Nickel and of Pre-strain on the Age-hardening of an Aluminium-2.5%Copper-1.2%Magnesium Alloy, Ministry of Aviation; Royal Aircraft Establishment; RAE Farnborough, 1964.
      [22]
      J. Hernandez-Sandoval, G.H. Garza-Elizondo, A.M. Samuel, S. Valtiierra, and F.H. Samuel, The ambient and high temperature deformation behavior of Al-Si-Cu-Mg alloy with minor Ti, Zr, Ni additions, Mater. Des., 58(2014), p. 89.
      [23]
      X.Y. Lv, E.J. Guo, Z.H. Li, and G.J. Wang, Research on microstructure in as-cast 7A55 aluminum alloy and its evolution during homogenization, Rare Met., 30(2011), No. 6, p. 664.
      [24]
      M.H. Jacobs, The structure of metastable precipitates formed during ageing of an A1-Mg-Si alloy, Philos. Mag. A, 26(1972), No. 1, p. 1.
      [25]
      G.C. Weatherly, A. Perovic, D.D. Perovic, N.K. Mukhopadhyay, and D.J. Lloyd, The precipitation of the Q phase in an AA6111 Alloy, Metall. Mater. Trans. A, 32(2001), No. 2, p. 213.
      [26]
      P. Orozco-González, M. Castro-Román, A.I. Martínez, M. Herrera-Trejo, A.A. López, and J. Quispe-Marcatoma, Precipitation of Fe-rich intermetallic phases in liquid Al-13.58Si-11.59Fe-1.19Mn alloy, Intermetallics, 18(2010), No. 8, p. 1617.
      [27]
      Z.B. Xing, Z.R. Nie, X.L. Ji, X.D. Wang, and J.X. Zou, Effect of trace element erbium and manganese on microstructure and properties of Al-Mg alloy, Rare Met. Mater. Eng., 35(2006), No. 12, p. 1979.
      [28]
      D.M. Herlach, K. Eckler, A. Karma, and M. Schwarz, Grain refinement through fragmentation of dendrites in undercooled melts, Mater. Sci. Eng. A, 304-306(2001), p. 20.
      [29]
      H. Zhang, N.P. Jin, and J.H. Chen, Hot deformation behavior of Al-Zn-Mg-Cu-Zr aluminum alloys during compression at elevated temperature, Trans. Nonferrous Met. Soc. China, 21(2011), No. 3, p. 437.
      [30]
      Z.G. Chen, Z.Q. Zheng, and S.P. Ringer, Effect of small addition of Sc on the microstructural evolution in Al-15Ag alloy, J. Mater. Sci. Technol., 21(2005), No. 5, p. 630.
      [31]
      Z.W. Chen, Q.Y. Fan, and K. Zhao, Microstructure and microhardness of nanostructured Al-4.6Cu-Mn alloy ribbons, Int. J. Miner. Metall. Mater., 22(2015), No. 8, p. 860.
      [32]
      Y.F. Liu, W. Tian, and Y. Sun, Research progress of microalloying of Al-Zn-Mg-Cu aluminum alloy, Nonferrous Met. Mater. Eng., 39(2018), No. 1, p. 38.
      [33]
      D.L. Gilmore and E.A. Starke Jr, Trace element effects on precipitation processes and mechanical properties in an Al-Cu-Li alloy, Metall. Mater. Trans. A, 28(1997), No. 7, p. 1399.
      [34]
      L. Lodgaard and N. Ryum, Precipitation of dispersoids containing Mn and/or Cr in Al–Mg–Si alloys, Mater. Sci. Eng. A, 283(2000), No. 1-2, p. 144.
      [35]
      C.D. Marioara, S.J. Andersen, H.W. Zandbergen, and R. Holmestad, The influence of alloy composition on precipitates of the Al-Mg-Si system, Metall. Mater. Trans. A, 36(2005), No. 3, p. 691.
      [36]
      Z.G. Chen, Z.Q. Zheng, and Z.X. Wang, Effect of lithium on the aging characteristics and microstructure of Al-4Mg-1.5Cu-0.4Ag alloys, J. Mater. Sci., 39(2004), No. 6, p. 2253.
      [37]
      Z.M. Yin, Q.L. Pan, Y.H. Zhang, and F. Jiang, Effect of minor Sc and Zr on the microstructure and mechanical properties of Al–Mg based alloys, Mater. Sci. Eng. A, 280(2000), No. 1, p. 151.
      [38]
      V. Ocenasek and M. Slamova, Resistance to recrystallization due to Sc and Zr addition to Al–Mg alloys, Mater. Charact., 47(2001), No. 2, p. 157.
      [39]
      N.C.W. Kuijpers, F.J. Vermolen, K. Vuik, and S. van der Zwaag, A model of the β-AlFeSi to α-Al(FeMn)Si transformation in Al-Mg-Si alloys, Mater. Trans., 44(2003), No. 7, p. 1448.
      [40]
      Y.J. Li and L. Arnberg, A eutectoid phase transformation for the primary intermetallic particle from Alm(Fe,Mn) to Al3(Fe,Mn) in AA5182 alloy, Acta Mater., 52(2004), No. 10, p. 2945.
      [41]
      Y.H. Cai, C. Wang, and J.S. Zhang, Microstructural characteristics and aging response of Zn-containing Al-Mg-Si-Cu alloy, Int. J. Miner. Metall. Mater., 20(2013), No. 7, p. 659.
      [42]
      L.Y. Cao, M.X. Guo, H. Cui, Y.H. Cai, Q.X. Zhang, X.Q. Hu, and J.S. Zhang, Study on the kinetics of phase transformation β → α in the homogeneous heat treatment of Al-Mg-Si series alloys, Acta Metall. Sin., 49(2013), No. 4, p. 428.
      [43]
      W.B. Lievers, A.K. Pilkey, and D.J. Lloyd, The influence of iron content on the bendability of AA6111 sheet, Mater. Sci. Eng. A, 361(2003), No. 1-2, p. 312.
      [44]
      L. Zhuang, J. Bottema, P. Kaasenbrood, W.S. Miller, and P. De Smet, The effect of small particles on annealed grain size and texture of Al-Mg-Si alloys, Mater. Sci. Forum, 217-222(1996), p. 487.
      [45]
      M.X. Guo, J. Zhu, Y. Zhang, G.J. Li, T. Lin, J.S. Zhang, and L.Z. Zhuang, The formation of bimodal grain size distribution in Al-Mg-Si-Cu alloy and its effect on the formability, Mater. Charact., 132(2017), p. 248.
      [46]
      P.C. Ma, D. Zhang, L.Z. Zhuang, and J.S. Zhang, Effect of alloying elements and processing parameters on the Portevin-Le Chatelier effect of Al-Mg alloys, Int. J. Miner. Metall. Mater., 22(2015), No. 2, p. 175.
      [47]
      O. Engler, Nucleation and growth during recrystallisation of aluminium alloys investigated by local texture analysis, Mater. Sci. Technol., 12(1996), No. 10, p. 859.
      [48]
      J.D. Robson, D.T. Henry, and B. Davis, Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation, Acta Mater., 57(2009), No. 9, p. 2739.
      [49]
      X.F. Wang, M.X. Guo, J.R. Luo, J. Zhu, J.S. Zhang, and L.Z. Zhuang, Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles, Mater. Charact., 134(2017), p. 123.
      [50]
      G.J. Li, M.X. Guo, J.Q. Du, J.S. Zhang, L.Z. Zhuang, and E.J. Lavernia, Influence of precipitate-assisted nucleation on the microstructure and mechanical properties of Al-Mg-Si- Cu-Zn alloys, Philos. Mag., 99(2019), No. 11, p. 1335.
      [51]
      H.E. Vatne, O. Engler, and E. Nes, Influence of particles on recrystallisation textures and microstructures of aluminium alloy 3103, Mater. Sci. Technol, 13(1997), No. 2, p. 93.
      [52]
      P.D. Wu, S.R. MacEwen, D.J. Lloyd, and K.W. Neale, Effect of cube texture on sheet metal formability, Mater. Sci. Eng. A, 364(2004), No. 1-2, p. 182.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计