留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 6
Jun.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  638
  • HTML全文浏览量:  119
  • PDF下载量:  8
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(6): 775-786
Seyed Esmaiel Shakib, Ramin Raiszadeh, and Jalil Vahdati-Khaki, A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)-Al2O3 nanocomposite, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 775-786. https://doi.org/10.1007/s12613-019-1779-8
Cite this article as:
Seyed Esmaiel Shakib, Ramin Raiszadeh, and Jalil Vahdati-Khaki, A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)-Al2O3 nanocomposite, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 775-786. https://doi.org/10.1007/s12613-019-1779-8
shu
引用本文 PDF XML SpringerLink
研究论文

A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)-Al2O3 nanocomposite

  • Department of Metallurgy and Materials Science, School of Engineering, Shahid Bahonar University of Kerman, Kerman 7616913439, Iran

  • Department of Materials Science and Metallurgical Engineering, Engineering Faculty, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran

  • 通讯作者:

    Ramin Raiszadeh    E-mail: rraiszadeh@uk.ac.ir

  • Self-propagating high-temperature synthesis (SHS) was used to fabricate a Fe(Cr)-Al2O3 nanocomposite. The composite was fabricated by the reactions between the powders of Fe, Fe2O3, Cr2O3, and Al. The effect of blending ratio and mechanical activation of the initial powders and the precursor compressing pressure on the microstructure of the final product was studied by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The significance of the effect of each of the aforementioned parameters on the quality of the composite (assessed by measuring the compressive strength and wear resistance) was determined using a full-factorial design of experiments method. The results showed that the best molar powder ratio that produced the most homogeneous product through a sustainable SHS reaction was Fe:Fe2O3:Cr2O3:Al=10:1:1:4. A lower Fe content caused the Fe(Cr) phase to melt and separate from the rest of the materials.
    • Research Article

    A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)-Al2O3 nanocomposite

    + Author Affiliations
      Abstract
    • Self-propagating high-temperature synthesis (SHS) was used to fabricate a Fe(Cr)-Al2O3 nanocomposite. The composite was fabricated by the reactions between the powders of Fe, Fe2O3, Cr2O3, and Al. The effect of blending ratio and mechanical activation of the initial powders and the precursor compressing pressure on the microstructure of the final product was studied by optical microscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The significance of the effect of each of the aforementioned parameters on the quality of the composite (assessed by measuring the compressive strength and wear resistance) was determined using a full-factorial design of experiments method. The results showed that the best molar powder ratio that produced the most homogeneous product through a sustainable SHS reaction was Fe:Fe2O3:Cr2O3:Al=10:1:1:4. A lower Fe content caused the Fe(Cr) phase to melt and separate from the rest of the materials.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(27)
    • [1]
      A.G. Merzhanov and I.P. Borovinskaya, Historical retrospective of SHS: An autoreview, Int. J. Self Propag. High Temp. Synth., 17(2008). No. 4, p. 242.
      [2]
      A. Moloodi, R. Raiszadeh, J. Vahdati-Khaki, and A. Babakhani, An assessment of the process of self-propagating high-temperature synthesis for the fabrication of porous copper composite, J. Alloys Compd., 487(2009), No. 1-2, p. 413.
      [3]
      E.A. Levashov, A.S. Mukasyan, A.S. Rogachev, and D.V. Shtansky, Self-propagating high-temperature synthesis of advanced materials and coatings, Int. Mater. Rev., 62(2017), No. 4, p. 203.
      [4]
      A.G. Merzhanov, Fundamentals, achievements, and perspectives for development of solid-flame combustion, Russ. Chem. Bull., 46(1997), No. 1, p. 1.
      [5]
      Z.Z. Du, H.G. Fu, H.F. Fu, and Q. Xiao, A study of ceramic-lined compound copper pipe produced by SHS–centrifugal casting, Mater. Lett., 59(2005), No. 14-15, p. 1853.
      [6]
      A.G. Merzhanov, The chemistry of self-propagating high-temperature synthesis, J. Mater. Chem., 14(2004), No. 12, p. 1779.
      [7]
      C.L. Yeh and Y.S. Chen, Effects of Al content on formation of TaC, Ta2C, and Ta2AlC by combustion synthesis with aluminothermic reactions, Ceram. Int., 43(2017), No. 17, p. 15659.
      [8]
      C.L. Yeh and J.A. Peng, Effects of oxide precursors on fabrication of Mo5Si3–Al2O3 composites via thermite-based combustion synthesis, Intermetallics, 83(2017), p. 87.
      [9]
      C.L. Yeh and J.A. Peng, Fabrication of WSi2–Al2O3 and W5Si3–Al2O3 composites by combustion synthesis involving thermite reduction, Ceram. Int., 42(2016), No. 12, p. 14006.
      [10]
      G.M. Zhu, X.H. Wang, P.Z. Feng, D.H. Li, T. Yang, and F. Akhtar, Synthesis, microstructure and mechanical properties of (Mo,Ti)Si2/Al2O3 composites prepared by thermite-reaction-assisted combustion synthesis, J. Alloys Compd., 688(2016), p. 870.
      [11]
      M. Sharifitabar, J.Vahdati-Khaki, and M. Haddad-Sabzevar, Formation mechanism of TiC–Al2O3–Fe3Al composites during self-propagating high-temperature synthesis of TiO2–Al–C–Fe system, Ceram. Int., 42(2016), No. 10, p. 12361.
      [12]
      S. Mohammadkhani, E. Jajarmi, H. Nasiri, J. Vahdati-Khaki, and M. Haddad-Sabzevar, Applying FeAl coating on the low carbon steel substrate through self-propagation high temperature synthesis (SHS) process, Surf. Coat. Technol., 286(2016), p. 383.
      [13]
      J. Feizabadi, J. Vahdati-Khaki, M. Haddad-Sabzevar, M. Sharifitabar, and S. Aliakbari-Sani, Fabrication of in situ Al2O3 reinforced nanostructure 304 stainless steel matrix composite by self-propagating high temperature synthesis process, Mater. Des., 84(2015), p. 325.
      [14]
      X.H. Xuan, Z.G. Su, Z. Wen, J. An, and C. Liang, High-performance ceramic-lined composite pipes with ZrO2 additive prepared by centrifugal-SHS process, Mater. Trans., 57(2016), No. 5, p. 573.
      [15]
      F. Velasco, W.M. Lima, N. Antón, J. Abenójar, and J.M. Torralba, Effect of intermetallic particles on wear behaviour of stainless steel matrix composites, Tribol. Int., 36(2003), No. 7, p. 547.
      [16]
      T.Y. Kiseleva, A.A. Novakova, T.L. Talako, T.F. Grigor’eva, and A.N. Falkova, Obtainment of the Fe0.70-xCrxAl0.3/Al2O3 nanocomposite by the method of SHS of mechanoactivated Cr2O3+ Fe + Al mixtures, Inorg. Mater., 45(2009), No. 7, p. 827.
      [17]
      D.S. Gowtam, M. Ziyauddin, M. Mohape, S.S. Sontakke, V.P. Deshmukh, and A.K. Shah, In situ TiC-reinforced austenitic steel composite by self-propagating high temperature synthesis, Int. J. Self Propag. High Temp. Synth., 16(2007), No. 2, p. 70.
      [18]
      ASTM International, ASTM Standard E9-09: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature, ASTM International, West Conshohocken, 2018.
      [19]
      ASTM International, ASTM Standard G99-17: Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, West Conshohocken, 2017.
      [20]
      D.R. Gaskell, D.E. Laughlin, Introduction to the Thermodynamics of Materials, CRC Press, New York, 2017.
      [21]
      A.K. Singh, Advanced X-ray Techniques in Research and Industry, IOS Press, Washington, 2005.
      [22]
      A. Mosleh, M. Ehteshamzadeh, and R. Taherzadeh-Mousavian, Fabrication of an r-Al2Ti intermetallic matrix composite reinforced with α-Al2O3 ceramic by discontinuous mechanical milling for thermite reaction, Int. J. Miner. Metall. Mater., 21(2014), No. 10, p. 1037.
      [23]
      W.F. Gale and T.C. Totemeier, Smithells Metals Reference Book, Butterworth-Heinemann, Oxford, 2003.
      [24]
      E.A. Levashov, V.V. Kurbatkina, A.S. Rogachev, and N.A. Kochetov, Mechanoactivation of SHS systems and processes, Int. J. Self Propag. High Temp. Synth., 16(2007), No. 1, p. 46.
      [25]
      L. Takacs, Self-sustaining reactions induced by ball milling, Prog. Mater Sci., 47(2002), No. 4, p. 355.
      [26]
      R.T. Mousavian, S. Sharafi, and M.H. Shariat, Microwave-assisted combustion synthesis in a mechanically activated Al–TiO2–H3BO3 system, Int. J. Refract. Met. Hard Mater., 29(2011), No. 2, p. 281.
      [27]
      H. Beygi, M. Zare, and S.A. Sajjadi, Fabrication of FeNi–Al2O3 nanocomposites and optimization of mechanical properties using Taguchi method, Powder Technol., 232(2012), p. 49.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计