Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines

Jian-guo Liu; Long-zhe Jin; Jia-ying Wang; Sheng-nan Ou; Jing-zhong Guo; Tian-yang Wang

doi:10.1007/s12613-019-1793-x

Volume 26 Issue 6

Jun. 2019

Turn off MathJax

数据统计

计量

文章访问数: 455
HTML全文浏览量: 85
PDF下载量: 41
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2019 > 26(6): 665-672

Jian-guo Liu, Long-zhe Jin, Jia-ying Wang, Sheng-nan Ou, Jing-zhong Guo, and Tian-yang Wang, Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 665-672. https://doi.org/10.1007/s12613-019-1793-x

Cite this article as:

Jian-guo Liu, Long-zhe Jin, Jia-ying Wang, Sheng-nan Ou, Jing-zhong Guo, and Tian-yang Wang, Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines, Int. J. Miner. Metall. Mater., 26(2019), No. 6, pp. 665-672. https://doi.org/10.1007/s12613-019-1793-x

Citation:

PDF( 8436 KB)

引用本文 PDF XML SpringerLink

研究论文

Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines

School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
Key Laboratory of High-Efficient Mining and Safety of Metal Mines of the Ministry of Education, University of Science and Technology Beijing, Beijing 100083, China
Mine Emergency Technology Research Center, University of Science and Technology Beijing, Beijing 100083, China
College of Safety Engineering, North China Institute of Science and Technology, Yanjiao 101601, China

通讯作者:
Long-zhe Jin E-mail: lzjin@ustb.edu.cn

中文摘要

The micromorphology and physicochemical properties of hydrophobic blasting dust (HBD) from an iron mine were comprehensively analyzed by laser particle size analysis (LPSA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that the HBD particles can be classified into three types based on their particle size (PS):larger particles (PS > 10 μm), medium particles (1 μm ≤ PS ≤ 10 μm), and nanoparticles (PS < 1 μm). The cumulative volume of respirable dust (PS ≤ 10 μm) was 84.45%. In addition, three shapes of HBD were observed by SEM:prism, flake, and bulk. In particular, the small particles were mostly flaky, with a greater possibility of being inhaled. Furthermore, the body and surface chemical compounds of HBD were determined by XRD and XPS, respectively. Ammonium adipate (C₆H₁₆N₂O₄) was the only organic compound in the body of HBD, but its mass fraction was only 13.4%. However, the content of organic C on the surface of HBD was 85.35%. This study demonstrated that the small-particle size and large amount of organic matter on the surface of HBD are the main reasons for its hydrophobicity, which can provide important guidance for controlling respirable dust in iron mines.

关键词:

Research Article

Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines

+ Author Affiliations

Abstract

Abstract

The micromorphology and physicochemical properties of hydrophobic blasting dust (HBD) from an iron mine were comprehensively analyzed by laser particle size analysis (LPSA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results show that the HBD particles can be classified into three types based on their particle size (PS):larger particles (PS > 10 μm), medium particles (1 μm ≤ PS ≤ 10 μm), and nanoparticles (PS < 1 μm). The cumulative volume of respirable dust (PS ≤ 10 μm) was 84.45%. In addition, three shapes of HBD were observed by SEM:prism, flake, and bulk. In particular, the small particles were mostly flaky, with a greater possibility of being inhaled. Furthermore, the body and surface chemical compounds of HBD were determined by XRD and XPS, respectively. Ammonium adipate (C₆H₁₆N₂O₄) was the only organic compound in the body of HBD, but its mass fraction was only 13.4%. However, the content of organic C on the surface of HBD was 85.35%. This study demonstrated that the small-particle size and large amount of organic matter on the surface of HBD are the main reasons for its hydrophobicity, which can provide important guidance for controlling respirable dust in iron mines.
- iron mine dust;
- respirable dust;
- hydrophobic blasting dust;
- microstructure;
- physicochemical properties;
- particle size

FullText(HTML)

Supplements(0)

References(40)

References

[1]	X.T. Feng, J.P Liu, B.R Chen, Y.X Xiao, G.L Feng, and F.P Zhang, Monitoring, warning, and control of rockburst in deep metal mines, Engineering, 3(2017), No. 4, p. 538.
[2]	M.F. Cai, Prediction and prevention of rockburst in metal mines–A case study of Sanshandao gold mine, J. Rock Mech. Geotech. Eng. 8(2016), No. 2, p. 204.
[3]	G.Y. Zhao, M.A. Ju, L.J. Dong, X.B. Li, G.H. Chen, and C.X. Zhang, Classification of mine blasts and microseismic events using starting-up features in seismograms, Trans. Nonferrous Met. Soc. China, 25(2015), No. 10, p. 3410.
[4]	T. Norgate and N. Haque, Energy and greenhouse gas impacts of mining and mineral processing operations, J. Cleaner Prod., 18(2010), No. 3, p. 266.
[5]	M.I. Greenberg, J. Waksman, and J. Curtis, Silicosis: A review, Disease-a-Month, 53(2007), No. 8, p. 394.
[6]	X.Z. Wang, Z.A. Jiang, S.W. Wang, and Y. Liu, Numerical simulation of distribution regularities of dust concentration during the ventilation process of coal roadway driving, J. China Coal Soc., 32(2007), No. 4, p. 386.
[7]	J. Toraño, S. Torno, M. Menéndez, and M. Gent, Auxiliary ventilation in mining roadways driven with roadheaders: Validated CFD modelling of dust behaviour, Tunnelling Underground Space Technol., 26(2011), No. 1, p. 201.
[8]	H.T. Wang, D.M. Wang, W.X. Ren, X.X. Lu, F.W. Han, and Y.K. Zhang, Application of foam to suppress rock dust in a large cross-section rock roadway driven with roadheader, Adv. Powder Technol., 24(2013), No. 1, p. 257.
[9]	H.T. Wang, D.M. Wang, Y. Tang, B.T. Qin, and H.H. Xin, Experimental investigation of the performance of a novel foam generator for dust suppression in underground coal mines, Adv. Powder Technol., 25(2014), No. 3, p. 1053.
[10]	X.X. Lu, D.M. Wang, C.H. Xu, C.B. Zhu, and W. Shen, Experimental investigation and field application of foam used for suppressing roadheader cutting hard rock in underground tunneling, Tunnelling Underground Space Technol., 49(2015), p. 1.
[11]	S.P. Ma and Z.M. Kou, Study on mechanism of reducing dust by spray, J. China Coal Soc., 30(2005), No. 3, p. 297.
[12]	E.A. Almuhanna, R.G. Maghirang, J.P. Murphy, and L.E. Erickson, Effectiveness of electrostatically charged water spray in reducing dust concentration in enclosed spaces, Trans. ASABE, 51(2008), No. 1, p. 279.
[13]	J. Yang., X.K. Wu, J.G. Gao, and G.P. Li, Surface characteristics and wetting mechanism of respirable coal dust, Min. Sci. Technol., 20(2010), No. 3, p. 365.
[14]	L.Z. Jin, J.M. Zhu, Z.G. Ren, and W. Wei, Research on an antifreezing dust depressor used to the road in open-pit mine, J. Univ. Sci. Technol. Beijing, 26(2004), No. 1, p. 4.
[15]	L.Z. Jin, J.X. Yang, and S.N. Ou, Experimental study of wetting chemical dust-depressor, J. Saf. Environ., 7(2007), No. 6, p. 109.
[16]	H.H. Tang, L.H. Zhao, W. Sun, Y.H. Hu, and H.S. Han, Surface characteristics and wettability enhancement of respirable sintering dust by nonionic surfactant, Colloids Surf. A, 509(2016), p. 323.
[17]	X.F. Liu and B.S. Nie, Fractal characteristics of coal samples utilizing image analysis and gas adsorption, Fuel, 182(2016), p. 314.
[18]	X.F. Liu, D.Z. Song, X.Q. He, Z.P. Wang, M.R. Zeng, and L.K. Wang, Quantitative analysis of coal nanopore characteristics using atomic force microscopy, Powder Technol., 346(2019), p. 332.
[19]	X.Q. He, X.F. Liu, D.Z. Song, and B.S. Nie, Effect of microstructure on electrical property of coal surface, Appl. Surf. Sci., 483(2019), p. 713.
[20]	X.F. Liu, D.Z. Song, X.Q. He, B.S. Nie, and L.K. Wang, Insight into the macromolecular structural differences between hard coal and deformed soft coal, Fuel, 245(2019), p. 188.
[21]	X.F. Liu, D.Z. Song, X.Q. He, Z.P., Wang, M.R. Zeng, and K. Deng, Nanopore structure of deep-burial coals explored by AFM, Fuel, 246(2019), p. 9.
[22]	V.K. Kollipara, Y.P. Chugh, and K. Mondal, Physical, mineralogical and wetting characteristics of dusts from Interior Basin coal mines, Int. J. Coal Geol., 127(2014), p. 75.
[23]	C.H. Xu, D.M. Wang, H.T. Wang, H.H. Xin, L.Y. Ma, X.L. Zhu, Y. Zhang, and Q.G. Wang, Effects of chemical properties of coal dust on its wettability, Powder Technol., 318(2017), p. 33.
[24]	H.T. Wang, L. Zhang, D.M. Wang, and X.X. He, Experimental investigation on the wettability of respirable coal dust based on infrared spectroscopy and contact angle analysis, Adv. Powder Technol., 28(2017), No. 12, p. 3130.
[25]	G. Zhou, C.C. Xu, W.M. Cheng, Q. Zhang, and W. Nie, Effects of oxygen element and oxygen-containing functional groups on surface wettability of coal dust with various metamorphic degrees based on XPS experiment, J. Anal. Methods Chem., 2015(2015), art. No. 467242.
[26]	S.S. Lu, H.F. Liu, X.L. Guo, X. Liu, and X. Gong, Determination method of particle size and distribution of coal by laser size analyzer, China Powder Sci. Technol., 16(2010), No. 4, p. 5.
[27]	Å. Gustafsson, A.M. Krais, A. Gorzsás, T. Lundh, and P. Gerde, Isolation and characterization of a respirable particle fraction from residential house-dust, Environ. Res., 161(2018), p. 284.
[28]	Z.G. Cao, G. Yu, Y.S. Chen, C. Liu, K. Liu, T.T. Zhang, B. Wang, S.B. Deng, and J. Huang, Mechanisms influencing the BFR distribution patterns in office dust and implications for estimating human exposure, J. Hazard. Mater., 252(2013), p. 11.
[29]	C.C. Negrila, C. Logofatu, R.V. Ghita, C. Cotirlan, F. Ungureanu, A.S. Manea, and M.F. Lazarescu, Angle-resolved XPS structural investigation of GaAs surfaces, J. Cryst. Growth, 310(2008), No. 7-9, p. 1576.
[30]	T. Takahagi and A. Ishitani, XPS studies by use of the digital difference spectrum technique of functional groups on the surface of carbon fiber, Carbon, 22(1984), No. 1, p. 43.
[31]	Y. Taki and O. Takai, XPS structural characterization of hydrogenated amorphous carbon thin films prepared by shielded arc ion plating, Thin Solid Films, 316(1998), No. 1-2, p. 45.
[32]	M. Devillers, O. Dupuis, A. Janosi, and J.P. Soumillion, Coordination compounds as precursors for laser deposition of nickel-based conducting films, Appl. Surf. Sci., 81(1994), No. 1, p. 83.
[33]	J.L. Jordan, C.A. Kovac, J.F. Morar, and R.A. Pollak, High-resolution photoemission study of the interfacial reaction of Cr with polyimide and model polymers, Phys. Rev. B, 36(1987), No. 3, p. 1369.
[34]	E.Z. Kurmaev, V.V. Fedorenko, V.R. Galakhov, S. Bartkowski, S. Uhlenbrock, M. Neumann, P.R. Slater, C. Greaves, and Y. Miyazaki, Analysis of oxyanion (BO₃^3-, CO₃^2-, SO₄^2-, PO₄^3-, SeO₄^4-) substitution in Y123 compounds studied by X-ray photoelectron spectroscopy, J. Supercond., 9(1996), No. 1, p. 97.
[35]	A.B. Christie, J. Lee, I. Sutherland, and J.M. Walls, An XPS study of ion-induced compositional changes with group Ⅱ and group IV compounds, Appl. Surf. Sci., 15(1983), No. 1-4, p. 224.
[36]	E. Paparazzo, XPS and auger spectroscopy studies on mixtures of the oxides SiO₂, Al₂O₃, Fe₂O₃ and Cr₂O₃, J. Electron Spectrosc. Relat. Phenom., 43(1987), No. 2, p. 97.
[37]	M.I. Sosulnikov and Y.A. Teterin, X-ray photoelectron study of calcium, strontium, barium and their oxides, Dokl. Akad. Nauk SSSR, 317(1991), No. 2, p. 418.
[38]	D. Sprenger, H. Bach, W. Meisel, and P. Gütlich, XPS study of leached glass surfaces, J. Non-Cryst. Solids, 126(1990), No. 1-2, p. 111.
[39]	L.P. Buchwalter and C. Czornyj, Poly(methyl methacrylate) degradation during x-ray photoelectron spectroscopy analysis, J. Vac. Sci. Technol. A, 8(1990), No. 2, p. 781.
[40]	D. Briggs and G. Beamson, Primary and secondary oxygen-induced C1s binding energy shifts in X-ray photoelectron spectroscopy of polymers, Anal. Chem., 64(1992), No. 15, p. 1729.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines

中文摘要

Micromorphology and physicochemical properties of hydrophobic blasting dust in iron mines

Abstract

References

数据统计

Catalog