Cite this article as: |
Yu-peng Li, Da-qian Sun, Wen-biao Gong, and Liang Liu, Effects of postweld aging on the microstructure and properties of bobbin tool friction stir-welded 6082-T6 aluminum alloy, Int. J. Miner. Metall. Mater., 26(2019), No. 7, pp. 849-857. https://doi.org/10.1007/s12613-019-1800-2 |
Da-qian Sun E-mail: Sundq@jlu.edu.cn
[1] |
R.S. Mishtra, P.S. De, and N. Kumar, Friction Stir Welding and Processing, Springer International Publishing, Switzerland, 2014, p. 109.
|
[2] |
Y. Hovanski, J.E. Carsley, K.D. Clarke, and P.E. Krajewski, Friction-stir welding and processing, JOM, 67(2015), No. 5, p. 996.
|
[3] |
G. Çam and S. Mıstıkoğlu, Recent developments in friction stir welding of Al-alloys, J. Mater. Eng. Perform., 23(2014), No. 6, p. 1936.
|
[4] |
P.L. Threadgill, M.M.Z. Ahmed, J.P. Martin, J.G. Perrett, and B.P. Wynne, The use of bobbin tools for friction stir welding of aluminum alloys, Mater. Sci. Forum., 638-642(2010), p. 1179.
|
[5] |
M.K. Sued, D. Pons, J. Lavroff, and E.H. Wong, Design features for bobbin friction stir welding tools:development of a conceptual model linking the underlying physics to the production process, Mater. Des., 54(2014), p. 632.
|
[6] |
W.F. Xu, Y.X. Luo, W. Zhang, and M.W. Fu, Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate, J. Mater. Sci. Technol., 34(2018), No. 1, p. 173.
|
[7] |
S.J. Chen, H. Li, S. Lu, R.Y. Ni, and J.H. Dong, Temperature measurement and control of bobbin tool friction stir welding, Int. J. Adv. Manuf. Technol., 86(2016), No. 1-4, p. 337.
|
[8] |
F.F. Wang, W.Y. Li, J. Shen, Q. Wen, and J.F. dos Santos, Improving weld formability by a novel dual-rotation bobbin tool friction stir welding, J. Mater. Sci. Technol., 34(2018), No. 1, p. 135.
|
[9] |
J.J. Shen, F.F. Wang, U.F.H. Suhuddin, S.Y. Hu, W.Y. Li, and J.F. dos Santos, Crystallographic texture in bobbin tool friction stir welded aluminum, Metall. Mater. Trans. A, 46(2015), No. 7, p. 2809.
|
[10] |
L. Wan, Y.X. Huang, Z.L. Lv, S.X. Lv, and J.C. Feng, Effect of self-support friction stir welding on microstructure and microhardness of 6082-T6 aluminum alloy joint, Mater. Des., 55(2014), p. 197.
|
[11] |
H.J. Zhang, M. Wang, X. Zhang, and G.X. Yang, Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum alloy, Mater. Des., 65(2015), p. 559.
|
[12] |
J.H. Dong, C. Gao, Y. Lu, J. Han, X.D. Jiao, and Z.X. Zhu, Microstructural characteristics and mechanical properties of bobbin-tool friction stir welded 2024-T3 aluminum alloy, Int. J. Miner. Metall. Mater., 24(2017), No. 2, p. 171.
|
[13] |
J.Y. Li, X.P. Zhou, C.L. Dong, and J.H. Dong, Temperature fields in 6082 aluminum alloy samples bobbin-tool friction stir welded, J. Aeronaut. Mater., 33(2013), No. 5, p. 36.
|
[14] |
X.M. Liu, J.S. Yao, Y. Cai, H. Meng, and Z.D. Zou, Simulation on the temperature field of bobbin tool friction stir welding of AA 2014 aluminium alloy, Appl. Mech. Mater., 433-435(2013), p. 2091.
|
[15] |
J. Boonma, S. Khammuangsa, K. Uttarasak, J. Dutchaneephet, C. Boonruang, and N. Sirikulrat, Post-weld heat treatment effects on hardness and impact strength of aluminum alloy 6061 friction stir butt weld, Mater. Trans., 56(2015), No. 7, p. 1072.
|
[16] |
G. İpekoğlu, S. Erim, and G. Çam, Investigation into the influence of post-weld heat treatment on the friction stir welded AA6061 al-alloy plates with different temper conditions, Metall. Mater. Trans. A, 45(2014), No. 2, p. 864.
|
[17] |
Z. Zhang, B.L. Xiao, and Z.Y. Ma, Enhancing mechanical properties of friction stir welded 2219Al-T6 joints at high welding speed through water cooling and post-welding artificial ageing, Mater. Charact., 106(2015), p. 255.
|
[18] |
R.D. Fu, J.F. Zhang, Y.J. Li, J. Kang, H.J. Liu, and F.C. Zhang, Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet, Mater. Sci. Eng. A, 559(2013), p. 319.
|
[19] |
ASTM E8/E8M-13a, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, 2013.
|
[20] |
B. Wang, Study on Microstructures and Mechanical Properties of Friction Stir Welding Joints of 6082-T6 Aluminum Alloy[Dissertation], Jilin University, Jilin, 2013, p. 21.
|
[21] |
M.A. Sutton, B. Yang, A.P. Reynolds, and R. Taylor, Microstructural studies of friction stir welds in 2024-T3 aluminum, Mater. Sci. Eng. A, 323(2002), No. 1-2, p. 160.
|
[22] |
R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen, The crystal structure of the β'phase in Al-Mg-Si alloys, Acta Mater., 55(2007), No. 11. p. 3815.
|
[23] |
C.D. Marioara, S.J. Andersen, H.W. Zandbergen, and R. Holmestad, The influence of alloy composition on precipitates of the Al-Mg-Si system, Metall. Mater. Trans. A, 36(2005), No. 3, p. 691.
|
[24] |
E. Cerri, P. Leo, X. Wang, and J.D. Embury, Mechanical properties and microstructural evolution of friction-stir-welded thin sheet aluminum alloys, Metall. Mater. Trans. A, 42(2011), No. 5, p. 1283.
|
[25] |
W.C. Yang, M.P. Wang, X.F. Sheng, Q. Zhang, and Z.A. Wang, Study of the aging precipitation and hardening behavior of 6005A alloy sheet for rail traffic vehicle, Acta Metall. Sin., 46(2010), No. 12, p. 1481.
|