Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process

C. Velmurugan; V. Senthilkumar; P. S. Kamala

doi:10.1007/s12613-019-1836-3

Volume 26 Issue 10

Oct. 2019

Turn off MathJax

数据统计

计量

文章访问数: 705
HTML全文浏览量: 166
PDF下载量: 55
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2019 > 26(10): 1311-1321

C. Velmurugan, V. Senthilkumar, and P. S. Kamala, Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process, Int. J. Miner. Metall. Mater., 26(2019), No. 10, pp. 1311-1321. https://doi.org/10.1007/s12613-019-1836-3

Cite this article as:

C. Velmurugan, V. Senthilkumar, and P. S. Kamala, Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process, Int. J. Miner. Metall. Mater., 26(2019), No. 10, pp. 1311-1321. https://doi.org/10.1007/s12613-019-1836-3

Citation:

PDF( 13983 KB)

引用本文 PDF XML SpringerLink

研究论文

Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process

Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, India

中文摘要

NiTi shape memory alloys (SMAs) was developed using the spark-plasma sintering (SPS) process with different average particle size (45 µm and 10 µm) under various temperature. The influence of particle size and temperature on the density, microstructure, and corrosion behavior of the NiTi in simulated body fluid was examined. The porosity decreased with increasing sintering temperature and decreasing particle size, which resulted in an increase in density of the alloy. Increasing the sintering temperature led to the formation of Ni- and Ti-rich intermetallic such as Ni₃Ti and NiTi₂. The formation of these secondary phases influenced the corrosion behavior of NiTi by changing its chemical composition. The planar structure of NiTi was transformed into a dendritic structure at 900℃, which resulted in the formation of uniform oxide and phosphate layers on the entire surface. A high corrosion potential and low corrosion current density were achieved with NiTi prepared with 10 µm particles at 900℃, which exhibited superior corrosion resistance.

关键词:

Research Article

Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process

+ Author Affiliations

Abstract

Abstract

NiTi shape memory alloys (SMAs) was developed using the spark-plasma sintering (SPS) process with different average particle size (45 µm and 10 µm) under various temperature. The influence of particle size and temperature on the density, microstructure, and corrosion behavior of the NiTi in simulated body fluid was examined. The porosity decreased with increasing sintering temperature and decreasing particle size, which resulted in an increase in density of the alloy. Increasing the sintering temperature led to the formation of Ni- and Ti-rich intermetallic such as Ni₃Ti and NiTi₂. The formation of these secondary phases influenced the corrosion behavior of NiTi by changing its chemical composition. The planar structure of NiTi was transformed into a dendritic structure at 900℃, which resulted in the formation of uniform oxide and phosphate layers on the entire surface. A high corrosion potential and low corrosion current density were achieved with NiTi prepared with 10 µm particles at 900℃, which exhibited superior corrosion resistance.
- shape memory alloys;
- NiTi;
- microstructure;
- corrosion;
- spark-plasma sintering

FullText(HTML)

Supplements(0)

References(34)

References

[1]	Y. Zhong and T. Zhu, Phase-field modeling of martensitic microstructure in NiTi shape memory alloys, Acta Mater., 75(2014), p. 337.
[2]	J. Choi, D. Bogdanski, M. Köller, S.A. Esenwein, D. Müller, G. Muhr, and M. Epple, Calcium phosphate coating of nickel–titanium shape-memory alloys: Coating procedure and adherence of leukocytes and platelets, Biomaterials, 24(2003), No. 21, p. 3689.
[3]	N. Sharma and K. Kumar, Mechanical characteristics and bioactivity of porous Ni_50−x Ti₅₀Cu_x (x = 0, 5 and 10) prepared by P/M, Mater. Sci. Technol., 34(2018), No. 8, p. 934.
[4]	N.S. Manam, W.S.W. Harun, D.N.A. Shri, S.A.C. Ghani, T. Kurniawan, M.H. Ismail, and M.H.I. Ibrahim, Study of corrosion in biocompatible metals for implants: A review, J. Alloys Compd., 701(2017), p. 698.
[5]	F. Stergioudi, C.A. Vogiatzis, E. Pavlidou, S. Skolianos, and N. Michailidis, Corrosion resistance of porous NiTi biomedical alloy in simulated body fluids, Smart Mater. Struct., 25(2016), art. No. 095024.
[6]	J.M. Jani, M. Leary, A. Subic, and M.A. Gibson, A review of shape memory alloy research, applications and opportunities, Mater. Des., 56(2014), p. 1078.
[7]	J. Frenzel, Z. Zhang, K. Neuking, and G. Eggeler, High quality vacuum induction melting of small quantities of NiTi shape memory alloys in graphite crucibles, J. Alloys Compd., 385(2004), No. 1-2, p. 214.
[8]	P. Novák, P. Pokorný, V. Vojtěch, A. Knaislová, A. Školáková, J. Čapek, M. Karlík, and J. Kopeček, Formation of Ni–Ti intermetallics during reactive sintering at 500–650℃, Mater. Chem. Phys., 155(2015), p. 113.
[9]	M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and processing of NiTi implants: A review, Prog. Mater. Sci., 57(2012), No. 5, p. 911.
[10]	M. Elahinia, N.S. Moghaddam, M.T. Andani, A. Amerinatanzi, B.A. Bimber, and R.F. Hamilton, Fabrication of NiTi through additive manufacturing: A review, Prog. Mater. Sci., 83(2016), p. 630.
[11]	C. Yang, Q.R. Cheng, L.H. Liu, Y.H. Li, and Y.Y. Li, Effect of minor Cu content on microstructure and mechanical property of NiTiCu bulk alloys fabricated by crystallization of metallic glass powder, Intermetallics, 56(2015), p. 37.
[12]	N.B. Morgan and M. Broadley, Taking the art out of smart!-Forming processes and durability issues for the application of NiTi shape memory alloys in medical devices,[in] Proceedings for the Materials and Processes for Medical Devices Conference, California, 2004, p. 247.
[13]	C. Velmurugan, V. Senthilkumar, K. Biswas, and S. Yadav, Densification and microstructural evolution of spark plasma sintered NiTi shape memory alloy, Adv. Powder Technol., 29(2018), No. 10, p. 2456.
[14]	C. Yang, L.M. Kang, X.X. Li, W.W. Zhang, D.T. Zhang, Z.Q. Fu, Y.Y. Li, L.C. Zhang, and E.J. Lavernia, Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering, Acta Mater., 132(2017), p. 491.
[15]	C. Yang, L.H. Liu, Q.R. Cheng, D.D. You, and Y.Y. Li, Equiaxed grained structure: A structure in titanium alloys with higher compressive mechanical properties, Mater. Sci. Eng. A, 580(2013), p. 397.
[16]	L.M. Kang, C. Yang, Y.J. Zhao, X.X. Li, S.G. Qu, W.W. Zhang, Y. Long, and Z.Y. Xiao, Bimodal eutectic titanium alloys: Microstructure evolution, mechanical behavior and strengthening mechanism, Mater. Sci. Eng. A, 700(2017), p. 10.
[17]	R.Q. Hang, S.L. Ma, V. Ji, and P.K. Chu, Corrosion behavior of NiTi alloy in fetal bovine serum, Electrochim. Acta, 55(2010), No. 20, p. 5551.
[18]	A.I. Kapanen, Biocompatibility of Orthopaedic Implants on Bone Forming Cells, University of Oulu, Oulu, 2002.
[19]	H. Dong, X. Ju, H. Yang, L. Qian, and Z. Zhou, Effect of ceramic conversion treatments on the surface damage and nickel ion release of NiTi alloys under fretting corrosion conditions, J. Mater. Sci. Mater. Med., 19(2008), No. 2, p. 937.
[20]	M. Chembath, J.N. Balaraju, and M. Sujata, In vitro corrosion studies of surface modified NiTi alloy for biomedical applications, Adv. Biomater., 2014(2014), art. No. 697491.
[21]	J. Kim, J.K. Park, H.K. Kim, A.R. Unnithan, C.S. Kim, and C.H. Park, Optimization of electropolishing on NiTi alloy stents and its influence on corrosion behaviour, J. Nanosci. Nanotechnol., 17(2017), No. 4, p. 2333.
[22]	S.A. Hosseini, S. Akbarinia, D. Mohammadyani, and S.K. Sadrnezhaad, Enhanced corrosion resistance of porous NiTi with plasma sprayed alumina coating, Corros. Eng. Sci. Technol., 50(2015), No. 8, p. 595.
[23]	C. Velmurugan and V. Senthilkumar, The effect of Cu addition on the morphological, structural and mechanical characteristics of nanocrystalline NiTi shape memory alloys, J. Alloys Compd., 767(2018), p. 944.
[24]	D. Almasi, S. Izman, M. Sadeghi, N. Iqbal, F. Roozbahani, G. Krishnamurithy, T. Kamarul, and M.R.A. Kadir, In vitro evaluation of bioactivity of chemically deposited hydroxyapatite on polyether ether ketone, Int. J. Biomater., 2015(2015), art. No. 475435.
[25]	C. Yang, M.D. Zhu, X. Luo, L.H. Liu, W.W. Zhang, Y. Long, Z.Y. Xiao, Z.Q. Fu, L.C. Zhang, and E.J. Lavernia, Influence of powder properties on densification mechanism during spark plasma sintering, Scr. Mater., 139(2017), p. 96.
[26]	Y.Q. Fu, Y.W. Gu, C. Shearwood, J.K. Luo, A.J. Flewitt, and W.I. Milne, Spark plasma sintering of TiNi nano-powders for biological application, Nanotechnology, 17(2006), No. 21, p. 5293.
[27]	M.M. Verdian, K. Raeissi, M. Salehi, and S. Sabooni, Characterization and corrosion behavior of NiTi–Ti₂Ni–Ni₃Ti multiphase intermetallics produced by vacuum sintering, Vacuum, 86(2011), No. 1, p. 91.
[28]	A. Ahadi and Q.P. Sun, Effects of grain size on the rate-dependent thermomechanical responses of nanostructured superelastic NiTi, Acta Mater., 76(2014), p. 186.
[29]	A.C. Ciubotariu, L. Benea, M. Lakatos–Varsanyi, and V. Dragan, Electrochemical impedance spectroscopy and corrosion behaviour of Al₂O₃–Ni nano composite coatings, Electrochim. Acta, 53(2008), No. 13, p. 4557.
[30]	J.Y. Zhang, M. Xu, X.Y. Teng, and M. Zuo, Effect of Gd addition on microstructure and corrosion behaviors of Mg–Zn–Y alloy, J. Magnesium Alloys, 4(2016), No. 4, p. 319.
[31]	S. Das, Effect of particle size and amount on corrosion behaviour of Al–4.5wt% Cu/zircon sand composite, Corros. Eng. Sci. Technol., 45(2010), No. 1, p. 94.
[32]	K.D. Ralston, D. Fabijanic, and N. Birbilis, Effect of grain size on corrosion of high purity aluminium, Electrochim. Acta, 56(2011), No. 4, p.1729.
[33]	M.E. Turan, Y. Sun, F. Aydin, H. Zengin, Y. Turen, and H. Ahlatci, Effects of carbonaceous reinforcements on microstructure and corrosion properties of magnesium matrix composites, Mater. Chem. Phys., 218(2018), p. 182.
[34]	K. Elayaperumal and V.S. Raja, Corrosion Failures: Theory, Case Studies, and Solutions, 1st ed., John Wiley & Sons, USA, 2015: p. 26.

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process

中文摘要

Microstructure and corrosion behavior of NiTi shape memory alloys sintered in the SPS process

Abstract

References

数据统计

Catalog