留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 11
Nov.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  688
  • HTML全文浏览量:  136
  • PDF下载量:  21
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(11): 1385-1395
Yang Li, Peng-fei Du, Zhou-hua Jiang, Cong-lin Yao, Lu Bai, Qi Wang, Guang Xu, Chang-yong Chen, Lei Zhang, and Hua-bing Li, Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel, Int. J. Miner. Metall. Mater., 26(2019), No. 11, pp. 1385-1395. https://doi.org/10.1007/s12613-019-1845-2
Cite this article as:
Yang Li, Peng-fei Du, Zhou-hua Jiang, Cong-lin Yao, Lu Bai, Qi Wang, Guang Xu, Chang-yong Chen, Lei Zhang, and Hua-bing Li, Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel, Int. J. Miner. Metall. Mater., 26(2019), No. 11, pp. 1385-1395. https://doi.org/10.1007/s12613-019-1845-2
shu
引用本文 PDF XML SpringerLink
研究论文

Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel

  • School of Metallurgy, Northeasten University, Shenyang 110819, China

  • 通讯作者:

    Hua-bing Li    E-mail: lihb@smm.neu.edu.cn

  • The formation mechanism of acicular ferrite and its microstructural characteristics in 430 ferrite stainless steel with TiC additions were studied by theory and experiment. Using an "edge-to-edge matching" model, a 5.25 mismatch between TiC (FCC structure) and ferritic stainless steel (BCC structure) was identified, which met the mismatch requirement for the heterogeneous nucleation of 430 ferritic stainless steel. TiC was found to be an effective nucleation site for the formation of acicular ferrite in a smelting experiment, as analyzed by metallographic examination, Image-Pro Plus 6.0 analysis software, and SEM-EDS. Furthermore, small inclusions in the size of 2-4 μm increased the probability of acicular ferrite nucleation, and the secondary acicular ferrite would grow sympathetically from the initial acicular ferrite to produce multi-dimensional acicular ferrites. Moreover, the addition of TiC can increase the average microstrain and dislocation density of 430 ferrite stainless steel, as calculated by Williamson-Hall (WH) method, which could play some role in strengthening the dislocation.
    • Research Article

    Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel

    + Author Affiliations
      Abstract
    • The formation mechanism of acicular ferrite and its microstructural characteristics in 430 ferrite stainless steel with TiC additions were studied by theory and experiment. Using an "edge-to-edge matching" model, a 5.25 mismatch between TiC (FCC structure) and ferritic stainless steel (BCC structure) was identified, which met the mismatch requirement for the heterogeneous nucleation of 430 ferritic stainless steel. TiC was found to be an effective nucleation site for the formation of acicular ferrite in a smelting experiment, as analyzed by metallographic examination, Image-Pro Plus 6.0 analysis software, and SEM-EDS. Furthermore, small inclusions in the size of 2-4 μm increased the probability of acicular ferrite nucleation, and the secondary acicular ferrite would grow sympathetically from the initial acicular ferrite to produce multi-dimensional acicular ferrites. Moreover, the addition of TiC can increase the average microstrain and dislocation density of 430 ferrite stainless steel, as calculated by Williamson-Hall (WH) method, which could play some role in strengthening the dislocation.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(40)
    • [1]
      S. Ogibayashi, Advances in technology of oxide metallurgy, Nippon Steel Tech. Rep., 61(1994), p. 70.
      [2]
      X.M. Li, S.P. Zheng, Q. Zheng, and L.X. Zhu, Oxide metallurgy, Shanghai Met., 27(2005), No. 5, p. 55.
      [3]
      J. Takamura and S. Mizoguchi, Roles of oxides in steels performance metallurgy of oxides in steel,[in] Proceedings of the 6th International Iron and Steel Congress, Nagoya, 1990, p. 591.
      [4]
      Y.J. Oh, S.Y. Lee, J.S. Byun, J.H. Shim, and Y.W. Cho, Non-metallic inclusions and acicular ferrite in low carbon steel, Mater. Trans., JIM, 41(2000), No. 12, p. 1663.
      [5]
      J.M. Dowling, J.M. Corrbett, and H.W. Kerr, Inclusion phase and the nucleation of acicular ferrite in submerged arc welds in high strength low alloy steels, Metall. Trans. A, 17(1986), No. 9, p. 1611.
      [6]
      Y. Shen, X.L. Wan, Y. Liu, G.Q. Li, Z.L. Xue, and K.M. Wu, The significant impact of Ti content on microstructure-toughness relationship in the simulated coarse-grained heated-affected zone of high-strength low-alloy steels, Ironmaking Steelmaking, 46(2019), No. 6, p. 584.
      [7]
      J.M. Greggi and H.K.D.H. Bhadeshia, Solid-state nucleation of acicular ferrite on minerals added to molten steel, Acta Mater., 45(1997), No. 2, p. 739.
      [8]
      L.Y. Xu, Study on Inclusion Characteristics and Welding Properties of Magnesium Deoxidized Steel with Large Heat Energy[Dissertations], Central South University, Changsha, 2014, p. 15.
      [9]
      Y. Li, Z.H. Jiang, H.B. Li, and G.W. Fan, Inclusions in Steelmaking Process, Science Press, Beijing, 2016, p. 291.
      [10]
      J.S. Byun, J.H. Shim, Y.W. Cho, and D.N. Lee, Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel, Acta Mater., 51(2003), p. 1594.
      [11]
      S.S. Babu, The mechanism of acicular ferrite in weld deposits, Curr. Opin. Solid State Mater. Sci., 3-4(2004), No.8, p. 267.
      [12]
      D.Q. Zhang, Y. Lei, and Z.Y. Liu, Acicular ferrite in weld metal of microalloy steel, J. Univ. Petrol. China, 27(2016), No. 4, p. 144.
      [13]
      J.H. Shim, Y.W. Cho, S.H. Chung, J.D. Shim, and D.N. Lee, Nucleation of intragranular ferrite at Ti2O3 particle in low carbon steel, Acta Mater., 47(1999), No. 9, p. 2751.
      [14]
      G.D. Zhang, Behavior of Acicular Ferrite in Weld Metal and its Simulation[Dissertations], Huazhong University of Science and Technology, Wuhan, 2002, p. 112.
      [15]
      S. Kanazawa, A. Nakashima, K. Okamoto, and K. Kanaya, Improved toughness of weld fussion zone by fine TiN particles and development of a steel for large heat input welding, Tetsu-to-hagané, 61(1975), No. 11, p. 2589.
      [16]
      S. Matsuda and H. Kageyama, Effect of TiN particles on the proeutectoid ferrite reaction, Tetsu-to-Hagané, 62(1976), No. 10, p. 1356.
      [17]
      Y. Morikage, K. Oi, F. Kawabata, and K. Amano, Effect of TiN size on ferrite nucleation on TiN in low-C steel, Tetsu-to-Hagané, 84(1998), No. 7, p. 510.
      [18]
      D. Zhang, H. Terasaki, and Y. I. Komizo, In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C-Mn steel, Acta Mater., 58(2010), p. 1378.
      [19]
      K. Kasai, C. Lee, S. Nambu, J. Inoue, and T. Koseki, Transformation behavior of ferrite at steel/B1 compounds interface, Tetsu-to-Hagané, 96(2010), No. 3, p. 123.
      [20]
      C. Lee, S. Nambu, J. Inoue, and T. Koseki, Ferrite formation behaviors from B1 compounds in steels, ISIJ Int., 51(2011), No. 12, p. 2036.
      [21]
      H. Liu, Effect of Grain Refiner on Microstructure of 430L Ferritic Stainless Steel[Dissertations], Northeastern University, Shenyang, 2014, p. 25.
      [22]
      X.L. Wan, G.Q. Li, and K.M. Wu, Microstructure characteristics and formation mechanism of acicular ferrite in high-strength low-alloy steels, J. Iron Steel Res., 28(2016), p. 2.
      [23]
      M.X. Zhang and P.M. Kelly, Edge-to-edge matching model for predicting orientation relationships and habit planes-the improvements, Scripta Mater., 52(2005), No. 10, p. 963.
      [24]
      M.X. Zhang and P.M. Kelly, Crystallography and morphology of widmanstätten cementite in austenite, Acta Mater., 46(1998), No. 13, p. 4617.
      [25]
      D. Raabe, M. Holscher, M. Dubke, F. Reher, and K. Lucke, Texture development of strip cast ferritic stainless steel, Mater. Sci. Forum, 157-162(1984), p. 1039.
      [26]
      R.A. Farrar and P.L. Harrison, Acicular ferrite in carbon-manganese weld metals:an overview, J. Mater. Sci., 22(1987), No. 11, p. 3812.
      [27]
      I. Madariaga, I. Gutiexrrez, C.G. de Andrés, and C. Capdevila, Acicular ferrite formation in medium carbon steel with a two stage continuous cooling, Scripta Mater., 41(1999), No. 3, p. 229.
      [28]
      K.M. Wu, Z.G. Li, A.M. Guo, X.L. He, L.Q. Zhang, A.H. Fang, and L. Cheng, Microstructure evolution in a low carbon Nb-Ti microalloyed steel, ISIJ Int., 46(2006), No. 1, p. 161.
      [29]
      Y.T. Zhao, C.J. Shang, S.W. Yang, X.M. Wang, and X.L. He, The metastable austenite transformation in Mo-Nb-Cu-B low carbon steel, Mater. Sci. Eng. A, 433(2006), No. 1-2, p. 169.
      [30]
      S.S. Na and W. Tian, On oxalic acid corrosion test for stainless steel, Phys. Testing Chem. Anal. Part A, 37(2001), No. 11, p. 500.
      [31]
      Y.X. Hu, W. Cai, and Y.H. Rong, Fundamentals of Materials Science, Shanghai Jiaotong University Press, Shanghai, 2012, p. 181.
      [32]
      R.A. Ricks, P.R. Howell, and G.S. Barritte, The nature of acicular ferrite in HSLA steel weld metals, J. Mater. Sci., 17(1982), No. 3, p. 732.
      [33]
      D.Q. Zhang, Study on the Formation Mechanism of Intragranular Ferrite in Microalloyed Steel Weld Metal[Dissertations], Tianjin University, Tianjin, 2000, p. 15.
      [34]
      C.F. Kuang, S.G. Zhang, J. Li, J. Wang, and P. Li, Effect of temper rolling on the bake-hardening behavior of low carbon steel, Int. J. Miner. Metall. Mater., 22(2015), No. 1, p. 32.
      [35]
      W.J. Ma, Y.P. Bao, L.H. Zhao, and M. Wang, Control of the precipitation of TiN inclusions in gear steels, Int. J. Miner. Metall. Mater., 21(2014), No. 3, p. 234.
      [36]
      M. Enomoto, Y. Inagawa, K. Wu, S. Nanba, and T. Murakami, Three-dimensional obervation offerrite plate in low carbon steel weld, Tetsu-to-Hagané, 91(2005), No. 7, p. 609.
      [37]
      G.K. Williamson and R.E. Smallman, Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-schemer spectrum, Philos. Mag., 1(1956), No. 1, p. 34.
      [38]
      N. Guo, A Study on Microstructural Characterization and Mechanical Properties of Cold Drawing Pearlitic Steel Wires for Bridge Cable[Dissertations], Chongqing University, Chongqing, 2012, p. 25.
      [39]
      J.L. Lee, Evaluation of the nucleation potential of intragranular acicular ferrite in steel weldments, Acta Metal. Mater., (42) 2012, No. 10, p. 3297.
      [40]
      I. Madariaga and I. Gutierrez, Nucleation of acicular ferrite enhanced by the precipitation of CuS on MnS particular, Scripta Mater., (37) 1997, No. 8, p. 1185.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计