留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 26 Issue 12
Dec.  2019
Turn off MathJax
目录
数据统计

分享

计量
  • 文章访问数:  3113
  • HTML全文浏览量:  397
  • PDF下载量:  25
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2019  >  26(12): 1585-1593
Nilay Çömez, Can Çivi, and Hülya Durmuş, Reliability evaluation of hardness test methods of hardfacing coatings with hypoeutectic and hypereutectic microstructures, Int. J. Miner. Metall. Mater., 26(2019), No. 12, pp. 1585-1593. https://doi.org/10.1007/s12613-019-1866-x
Cite this article as:
Nilay Çömez, Can Çivi, and Hülya Durmuş, Reliability evaluation of hardness test methods of hardfacing coatings with hypoeutectic and hypereutectic microstructures, Int. J. Miner. Metall. Mater., 26(2019), No. 12, pp. 1585-1593. https://doi.org/10.1007/s12613-019-1866-x
shu
引用本文 PDF XML SpringerLink
研究论文

Reliability evaluation of hardness test methods of hardfacing coatings with hypoeutectic and hypereutectic microstructures

  • Department of Metallurgical and Materials Engineering, Manisa Celal Bayar University, Manisa 45140, Turkey

  • Department of Mechanical Engineering, Manisa Celal Bayar University, Manisa 45140, Turkey

  • 通讯作者:

    Nilay Çömez    E-mail: nilay.comez@cbu.edu.tr

  • Hardfacing coatings involve hard carbide/boride phases dispersed in a relatively soft steel matrix. For the hardness measurements of hardfacing coatings, depending on the microstructure, both the hardness test method and the applied load affect the hardness results; therefore, they affect the wear performance predictions of the coating. For this reason, the proper hardness test method should be determined according to the microstructure of the coating, and the reliability of the obtained hardness data should be established. This study aimed to determine the most suitable hardness test method for hypoeutectic and hypereutectic microstructures of hardfacing coatings by analyzing the reliability of Rockwell-C and Vickers hardness test results. Reliability analyses showed that Rockwell-C is not a suitable hardness test method for hypereutectic hardfacing coatings. Based on the relationship between wear resistance and hardness, Vickers hardness method was found more suitable for the considered materials.
    • Research Article

    Reliability evaluation of hardness test methods of hardfacing coatings with hypoeutectic and hypereutectic microstructures

    + Author Affiliations
      Abstract
    • Hardfacing coatings involve hard carbide/boride phases dispersed in a relatively soft steel matrix. For the hardness measurements of hardfacing coatings, depending on the microstructure, both the hardness test method and the applied load affect the hardness results; therefore, they affect the wear performance predictions of the coating. For this reason, the proper hardness test method should be determined according to the microstructure of the coating, and the reliability of the obtained hardness data should be established. This study aimed to determine the most suitable hardness test method for hypoeutectic and hypereutectic microstructures of hardfacing coatings by analyzing the reliability of Rockwell-C and Vickers hardness test results. Reliability analyses showed that Rockwell-C is not a suitable hardness test method for hypereutectic hardfacing coatings. Based on the relationship between wear resistance and hardness, Vickers hardness method was found more suitable for the considered materials.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(30)
    • [1]
      B. Srikarun and P. Muangjunburee, The effect of iron-based hardfacing with chromium powder addition onto low carbon steel, Mater. Today Proc., 5(2018), No. 3, p. 9272.
      [2]
      H.Z. Oo and P. Muangjunburee, Wear behaviour of hardfacing on 3.5% chromium cast steel by submerged arc welding, Mater. Today Proc., 5(2018), No. 3, p. 9281.
      [3]
      J.F. Gou, Y. Wang, J.P. Sun, and X.W. Li, Bending strength and wear behavior of Fe-Cr-C-B hardfacing alloys with and without rare earth oxide nanoparticles, Surf. Coat. Technol., 311(2017), p. 113.
      [4]
      K. Yang, Y. Gao, K. Yang, Y.F. Bao, and Y.F. Jiang, Microstructure and wear resistance of Fe-Cr13-C-Nb hardfacing alloy with Ti addition, Wear, 376-377(2017), p. 1091.
      [5]
      K. Günther, J.P. Bergmann, and D. Suchodoll, Hot wire-assisted gas metal arc welding of hypereutectic FeCrC hardfacing alloys:Microstructure and wear properties, Surf. Coat. Technol., 334(2018), p. 420.
      [6]
      M.F. Buchely, J.C. Gutierrez, L.M. León, and A. Toro, The effect of microstructure on abrasive wear of hardfacing alloys, Wear, 259(2005), No. 1-6, p. 52. Wear
      [7]
      H. Sabet, S. Khierandish, S. Mirdamadi, and M. Goodarzi, The microstructure and abrasive wear resistance of Fe-Cr-C hardfacing alloys with the composition of hypoeutectic, eutectic, and hypereutectic at Cr/C=6, Tribol. Lett., 44(2011), p. 237.
      [8]
      K. Gurumoorthy, M. Kamaraj, K.P. Rao, A.S. Rao, and S. Venugopal, Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy, Mater. Sci. Eng. A, 456(2007), No. 1-2, p. 11.
      [9]
      F. Sadeghi, H. Najafi, and A. Abbasi, The effect of Ta substitution for Nb on the microstructure and wear resistance of an Fe-Cr-C hardfacing alloy, Surf. Coat. Technol., 324(2017), p. 85.
      [10]
      H. Wang and S.F. Yu, Influence of heat treatment on microstructure and sliding wear resistance of high chromium cast iron electroslag hardfacing layer, Surf. Coat. Technol., 319(2017), p. 182.
      [11]
      A. Gualco, H.G. Svoboda, and E.S. Surian, Study of abrasive wear resistance of Fe-based nanostructured hardfacing, Wear, 360-361(2016), p. 14.
      [12]
      S. Da Sun, D. Fabijanic, A. Ghaderi, M. Leary, J. Toton, S.J. Sun, M. Brandt, and M. Easton, Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders, Surf. Coat. Technol., 296(2016), p. 76.
      [13]
      V.G. Efremenko, Y.G. Chabak, A. Lekatou, A.E. Karantzalis, K. Shimizu, V.I. Fedun, A.Y. Azarkhov, and A.V. Efremenko, Pulsed plasma deposition of Fe-C-Cr-W coating on high-Cr-cast iron:Effect of layered morphology and heat treatment on the microstructure and hardness, Surf. Coat. Technol., 304(2016), p. 293.
      [14]
      C.M. Chang, C.M. Lin, C.C. Hsieh, J.H. Chen, and W.T. Wu, Micro-structural characteristics of Fe-40wt%Cr-xC hardfacing alloys with[1.0-4.0wt%] carbon content, J. Alloys Compd., 487(2009), No. 1-2, p. 83.
      [15]
      Y.F. Zhou, Y.L. Yang, Y.W. Jiang, J. Yang, X.J. Ren, and Q.X. Yang, Fe-24wt% Cr-4.1wt% C hardfacing alloy:Microstructure and carbide refinement mechanisms with ceria additive, Mater. Charact., 72(2012), p. 77.
      [16]
      L. Condra, Reliability Improvement with Design of Experiment, CRC Press, USA, 2001, p. 11.
      [17]
      B. Hlaas and J. Hlaassen, System Reliability:Concepts and Applications, Edward Arnold, VSSD, California, 1989, p. 11.
      [18]
      Y.G. Zhao, X.Y. Zhang, and Z.H. Lu, A flexible distribution and its application in reliability engineering, Reliab. Eng. Syst. Saf., 176(2018), p. 1.
      [19]
      B. Gnedenko and I.A. Ushakov, Probabilistic Reliability Engineering, John Wiley & Sons, New York, 1995, p. 10.
      [20]
      D.C. Montgomery and G.C. Runger, Applied Statistics and Probability for Engineers, John Wiley & Sons, New York, 2007, p. 109.
      [21]
      W.G. Ireson, C.F. Coombs, and R.Y. Moss, Handbook of Reliability Engineering and Management, McGraw-Hill Professional, 1996, p. 308.
      [22]
      A.L. Yurkov, N.V. Jhuravleva, and E.S. Lukin, Kinetic microhardness measurements of sialon-based ceramics, J. Mater. Sci., 29(1994), No. 24, p. 6551.
      [23]
      J.M. Schneider, M. Bigerelle, and A. Iost, Statistical analysis of the Vickers hardness, Mater. Sci. Eng. A, 262(1999), No. 1-2, p. 256.
      [24]
      C. Çivi, N. Tahrali, and E. Atik, Reliability of mechanical properties of induction sintered iron based powder metal parts, Mater. Des., 53(2014), p. 383.
      [25]
      V. Homolová and L. Čiripová, Experimental investigation of isothermal section of the B-Cr-Fe phase diagram at 1353 K, Adv. Mater. Sci. Eng., (2017), art. No. 2703986.
      [26]
      Z.H. Wang, G.L. Wan, D.Y. He, J.M. Jiang, and L. Cui, Microstructures and wear resistance of Fe-Cr-B-C hardfacing alloys, J. Mater. Eng., 4(2014), No. 9, p. 57.
      [27]
      M. Eroglu, Boride coatings on steel using shielded metal arc welding electrode:Microstructure and hardness, Surf. Coat. Technol., 203(2009), No. 16, p. 2229.
      [28]
      C.C. Zhao, Y.F. Zhou, X.L. Xing, S. Liu, X.J. Ren, and Q.X. Yang, Investigation on the relationship between NbC and wear-resistance of Fe matrix composite coatings with different C contents, Appl. Surf. Sci., 439(2018), p. 468.
      [29]
      X.R. Hou, B. Zhao, J. Yang, X.L. Xing, Y.F. Zhou, Y.L. Yang, and Q.X. Yang, Fe-0.4wt%C-6.5wt%Cr hardfacing coating:Microstructures and wear resistance with La2O3 additive, Appl. Surf. Sci., 317(2014), p. 312.
      [30]
      C. Fan, M.C. Chen, C.M. Chang, W.T. Wu, Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium Fe-Cr-C hardfacing alloys, Surf. Coat. Technol., 201(2006), No. 3-4, p. 908.
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计