| Cite this article as: |
Bengisu Yilmaz, Behiye Yüksel, Gökhan Orhan, Devrim Aydin, and Zafer Utlu, Synthesis and characterization of salt-impregnated anodic aluminum oxide composites for low-grade heat storage, Int. J. Miner. Metall. Mater., 27(2020), No. 1, pp. 112-118. https://doi.org/10.1007/s12613-019-1890-x
|
Thermochemical heat storage (THS) systems have recently attracted a lot of attention in research and development. In this study, an anodic aluminum oxide (AAO) template, fabricated by a two-step anodization method, was used for the first time as the matrix material for a THS system. Different salts were studied as thermochemical materials for their suitability in low-grade heat storage application driven by solar energy for an open system. Compositions were prepared by absorbing CaCl2, MgCl2, LiCl, LiNO3 and mixtures of these salts under a vacuum in an AAO matrix. Field Emission Scanning Electron Microscopy was used to examine the morphology of the produced AAO composites. Thermal energy storage capacities of the composites were characterized using a differential scanning calorimeter. Characterization analysis showed that anodized Al plates were suitable matrix materials for THS systems, and composite sorbent prepared with a 1:1 ratio LiCl/LiNO3 salt mixture had the highest energy value among all composites, with an energy density of 468.1 kJ·kg−1.
| [1] |
H.Z. Liu, K. Nagano, D. Sugiyama, J. Togawa, and M. Nakamura, Honeycomb filters made from mesoporous composite material for an open sorption thermal energy storage system to store low-temperature industrial waste heat, Int. J. Heat Mass Transfer, 65(2013), p. 471. doi: 10.1016/j.ijheatmasstransfer.2013.06.021
|
| [2] |
H. Lui, Study on Open and Closed Chemical Thermal Energy Storage Technology with Low-Regeneration Temperature [Dissertation], Hokkaido University, Sapporo, 2014, p. 2.
|
| [3] |
P. Tatsidjodoung, N. Le Pierrès, and L.G. Luo, A review of potential materials for thermal energy storage in building applications, Renewable Sustainable Energy Rev., 18(2013), p. 327. doi: 10.1016/j.rser.2012.10.025
|
| [4] |
A. Sharma, V.V. Tyagi, C.R. Chen, and D. Buddhi, Review on thermal energy storage with phase change materials and applications, Renewable Sustainable Energy Rev., 13(2009), No. 2, p. 318. doi: 10.1016/j.rser.2007.10.005
|
| [5] |
S.P. Casey, J. Elvins, S. Riffat, and A. Robinson, Salt impregnated deccicant matrices for ‘open’ thermochemical energy storage-Selection, synthesis and characterization of candidate materials, Energy Build., 84(2014), p. 412. doi: 10.1016/j.enbuild.2014.08.028
|
| [6] |
H. Caliskan, I. Dincer, and A. Hepbasli, Thermodynamic analyses, and assessments of various thermal energy storage systems for buildings, Energy Convers. Manage., 62(2012), p. 109. doi: 10.1016/j.enconman.2012.03.024
|
| [7] |
D. Zhou, C.Y. Zhao, and Y. Tian, Review on thermal energy storage with phase change materials (PCMs) in building applications, Appl. Energy, 92(2012), p. 593. doi: 10.1016/j.apenergy.2011.08.025
|
| [8] |
D.J. Close and R.V. Dunkle, Use of adsorbent beds for energy storage in drying of heating systems, Sol. Energy, 19(1977), No. 3, p. 233. doi: 10.1016/0038-092X(77)90066-4
|
| [9] |
L.F. Cabeza, I. Martorell, L. Miró, A.I. Fernández, and C. Barreneche, Advances in Thermal Energy Storage Systems: Methods and Applications, Edited by Luisa F. Cabeza, Woodhead Publishing, 2014, p. 1.
|
| [10] |
S. Vasta, V. Brancato, D. La Rosa, V. Palomba, G. Restuccia, A. Sapienza, and A. Frazzica, Adsorption heat storage: state-of-the-art and future perspectives, Nanomaterials, 8(2018), No. 7, p. 522. doi: 10.3390/nano8070522
|
| [11] |
Y.N. Zhang, R.Z. Wang, Y.J. Zhao, T.X. Li, S.B. Riffat, and N.M. Wajid, Development and thermochemical characterizations of vermiculite/SrBr2 composite sorbents for low-temperature heat storage, Energy, 115(2016), p. 120. doi: 10.1016/j.energy.2016.08.108
|
| [12] |
K. Posern and C. Kaps, Calorimetric studies of thermochemical heat storage materials based on mixtures of MgSO4 and MgCl2, Thermochim. Acta, 502(2010), No. 1-2, p. 73. doi: 10.1016/j.tca.2010.02.009
|
| [13] |
N.H.S. Tay, M. Liu, M. Belusko, and F. Bruno, Review on transportable phase change material in thermal energy storage systems, Renewable Sustainable Energy Rev., 75(2017), p. 264. doi: 10.1016/j.rser.2016.10.069
|
| [14] |
R. Parameshwaran, S. Kalaiselvam, S. Harikrishnan, and A. Elayaperuma, Sustainable thermal energy storage technologies for buildings: A review, Renewable Sustainable Energy Rev., 16(2012), No. 5, p. 2394. doi: 10.1016/j.rser.2012.01.058
|
| [15] |
D. Aydin, S.P. Casey, and S. Riffat, The latest advancements on thermochemical heat storage systems, Renewable Sustainable Energy Rev., 41(2015), p. 356. doi: 10.1016/j.rser.2014.08.054
|
| [16] |
J. Jänchen, D. Ackermann, E. Weiler, H. Stach, and W. Brösicke, Calorimetric investigation on zeolites. AlPO4’s and CaCl2 impregnated attapulgite for thermochemical storage of heat, Thermochim. Acta, 434(2005), No. 1-2, p. 37. doi: 10.1016/j.tca.2005.01.009
|
| [17] |
A. Chel and G. Kaushik, Renewable energy technologies for sustainable development of energy efficient building, Alexandria Eng. J., 57(2018), No. 2, p. 655. doi: 10.1016/j.aej.2017.02.027
|
| [18] |
H.Z. Liu, K. Nagano, A. Morita, J. Togawa, and M. Nakamura, Experimental testing of a small sorption air cooler using composite material made from natural siliceous shale and chloride, Appl. Therm. Eng., 82(2015), p. 68. doi: 10.1016/j.applthermaleng.2015.02.060
|
| [19] |
Y.N. Zhang, R.Z. Wang, T.X. Li, and Y.J. Zhao, Thermochemical characterizations of novel vermiculite-LiCl composite sorbents for low-temperature heat storage, Energies, 9(2016), No. 10, p. 854. doi: 10.3390/en9100854
|
| [20] |
M. Tokarev, L. Gordeeva, V. Romannikov, I. Glaznev, and Y. Aristov, New composite sorbent CaCl2 in mesopores for sorption cooling/heating, Int. J. Therm. Sci., 41(2002), No. 5, p. 470. doi: 10.1016/S1290-0729(02)01339-X
|
| [21] |
H.J. Wu, S.W. Wang, and D.S. Zhu, Effects of impregnating variables on dynamic sorption characteristics and storage properties of composite sorbent for solar heat storage, Sol. Energy, 81(2007), No. 7, p. 864. doi: 10.1016/j.solener.2006.11.013
|
| [22] |
H.Z. Liu, K. Nagano, and J. Togawa, A composite material made of mesoporous siliceous shale impregnated with lithium chloride for an open sorption thermal energy storage system, Sol. Energy, 111(2015), p. 186. doi: 10.1016/j.solener.2014.10.044
|
| [23] |
S. Hongois, F. Kuznik, P. Stevens, and J.J. Roux, Development and characterization of a new MgSO4−zeolite composite for long-term thermal energy storage, Sol. Energy Mater. Sol. Cells, 95(2011), No. 7, p. 1831. doi: 10.1016/j.solmat.2011.01.050
|
| [24] |
G. Whiting, D. Grondin, S. Bennici, and A. Auroux, Heats of water sorption studies on zeolite–MgSO4 composites as potential thermochemical heat storage materials, Sol. Energy Mater. Sol. Cells, 112(2013), p. 112. doi: 10.1016/j.solmat.2013.01.020
|
| [25] |
G. Whiting, D. Grondin, D. Stosic, S. Bennici, and A. Auroux, Zeolite–MgCl2 composites as potential long-term heat storage materials: Influence of zeolite properties on heats of water sorption, Sol. Energy Mater. Sol. Cells, 128(2014), p. 289. doi: 10.1016/j.solmat.2014.05.016
|
| [26] |
C. Barreneche, A.I. Fernández, L.F. Cabeza, and R. Cuypers, Thermophysical characterization and thermal cycling stability of two TCM: CaCl2 and zeolite, Appl. Energy, 137(2015), p. 726. doi: 10.1016/j.apenergy.2014.09.025
|
| [27] |
D.S. Zhu, H.J. Wu, and S.W. Wang, Experimental study on composite silica gel supported CaCl2 sorbent for low grade heat storage, Int. J. Therm. Sci., 45(2006), No. 8, p. 804. doi: 10.1016/j.ijthermalsci.2005.10.009
|
| [28] |
A. Jabbari-Hichri, S. Bennici, and A. Auroux, Enhancing the heat storage density of silica–alumina by addition of hygroscopic salts (CaCl2, Ba(OH)2, and LiNO3), Sol. Energy Mater. Sol. Cells, 140(2015), p. 351. doi: 10.1016/j.solmat.2015.04.032
|
| [29] |
H. Jarimi, D. Aydin, Y.N. Zhang, Y. Ding, O. Ramadan, X.J. Chen, A. Dodo, Z. Utlu, and S. Riffat, Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application, Int. J. Low-Carbon Technol., 14(2019), No. 3, p. 313. doi: 10.1093/ijlct/ctx017
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载:
