| Cite this article as: |
Yan-bing Zong, Cheng-yu Zhao, Wen-hui Chen, Zhao-bo Liu, and Da-qiang Cang, Preparation of hydro-sodalite from fly ash using a hydrothermal method with a submolten salt system and study of the phase transition process, Int. J. Miner. Metall. Mater., 27(2020), No. 1, pp. 55-62. https://doi.org/10.1007/s12613-019-1904-8
|
Hydro-sodalites are zeolitic materials with a wide variety of applications. Fly ash is an abundant industrial solid waste, rich in silicon and aluminum, from which hydro-sodalite can be synthesized. However, traditional hydrothermal synthesis methods are complex and cannot produce high-purity products. Therefore, there is a demand for processing routes to obtain high-purity hydro-sodalites. In the present study, high-purity hydro-sodalite (90.2wt%) was prepared from fly ash by applying a hydrothermal method to a submolten salt system. Samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetry and differential thermal analysis (TG–DTA), and Fourier transform infrared spectroscopy (FTIR) to confirm and quantify conversion of the raw material into the product phase. Purity of the samples prepared with an H2O/NaOH mass ratio of 1.5 and an H2O/fly ash mass ratio of 10 was calculated and the conversion process of the product phase was studied. Crystallinity of the product was influenced more by the NaOH concentration, less by the H2O/fly ash mass ratio. The main reaction process of the system is that the SiO
ions produced by dissolution of the vitreous body in the fly ash and Na+ ions in the solution reacted on the destroyed mullite skeleton to produce hydro-sodalite. This processing route could help mitigate processing difficulties, while producing high-purity hydro-sodalite from fly ash.
| [1] |
Y.T. Xu, B. Yang, X.M. Liu, S. G, D.S. Li, E. Mukiza, and H.J. Li, Investigation of the medium calcium based non-burnt brick made by red mud, Int. J. Miner. Metall. Mater., 26(2019), No. 8, p. 983. doi: 10.1007/s12613-019-1814-9
|
| [2] |
J. Ding, S.H. Ma, S. Shen, Z.L. Xie, S.L. Zheng, and Y. Zhang, Research and industrialization progress of recovering alumina from fly ash: A concise review, Waste Manage., 60(2017), p. 375. doi: 10.1016/j.wasman.2016.06.009
|
| [3] |
X.L. Guo, X. G, S.J. Xin, and Y. Liu, Zeolite from coal fly ash by hydrothermal synthesis and characterization, Bull. Chin. Ceram. Soc., 35(2016), No. 2, p. 525.
|
| [4] |
X.Y. Liu, Y.G. Liu, and L. Zhang, Progress in synthesis and application of zeolites from coal fly ash, Inorg. Chem. Ind., 42(2010), No. 1, p. 13.
|
| [5] |
D.Z. Shi, J.L. Zhang, C. Zhang, P.F. Li, and R.H. Yuan, Research progress of hydrothermal synthesis of zeolite from fly ash, J. Saf. Environ., 16(2016), No. 3, p. 273.
|
| [6] |
H.L. Wang, Z.H. Xu, D.D. Wu, Q.W. Tan, Y.J. Xie, and C.L. Li, Preparation of artificial zeolite from ash by two-step hydrothermal method, Environ. Prot. Chem. Ind., 33(2013), No. 3, p. 272.
|
| [7] |
L. Wang, G.D. Wang, X.L. Li, and Y. Liu, Synthesis and characterization of Y-type zeolite from coal fly ash by hydrothermal method, Chin. J. Environ. Eng., 12(2018), No. 2, p. 618.
|
| [8] |
J. Behin, S.S. Bukhair, V. Dehnavi, H. Kazemian, and S. Rohani, Using coal fly ash and wastewater for microwave synthesis of LTA zeolite, Chem. Eng. Technol., 37(2014), No. 9, p. 1532. doi: 10.1002/ceat.201400225
|
| [9] |
X.S. Zhao, G.Q. Lu, and H.Y. Zhu, Effects of ageing and seeding on the formation of zeolite Y from coal fly ash, J. Porous Mater., 4(1997), No. 4, p. 245. doi: 10.1023/A:1009669104923
|
| [10] |
H.Y. Dai, Research of influential factor of utilizing flying ash to make molecular sieve, J. Taiyuan Uni., 12(2011), No. 1, p. 120.
|
| [11] |
N. Murayama, H. Yamamoto, and J. Shibata, Mechanism of zeolite synthesis from coal fly ash by alkali hydrothermal reaction, Int. J. Miner. Process., 64(2002), No. 1, p. 1. doi: 10.1016/S0301-7516(01)00046-1
|
| [12] |
L. Wang, G.D. Wang, X.L. Li, and Y. Liu, Synthesis and characterization of Y-type zeolite from coal fly ash by hydrothermal method, Chin. J. Environ. Eng., 37(2018), No. 2, p. 618.
|
| [13] |
C.L. Choi, M. Park, D.H. Lee, I.E. Kim, B.Y. Park, and J. Choi, Salt-thermal zeolitization of fly ash, Environ. Sci. Technol., 35(2001), No. 13, p. 2812. doi: 10.1021/es0017817
|
| [14] |
Y.B. Zhao, Research on mineralogical properties of fly ash, Clean Coal Technol., 21(2015), No. 4, p. 112.
|
| [15] |
P. Chindaprasit and U. Rattanasak, Characterization of the high-calcium fly ash geopolymer mortar with hot-weather curing systems for sustainable application, Adv. Powder Technol., 28(2017), No. 9, p. 2317. doi: 10.1016/j.apt.2017.06.013
|
| [16] |
S. Peng, Z.H. Wang, Y. Zheng, L.J. Shi, and M.J. Peng, Quantitative determination of melamine of milk powder by infrared spectroscopy, Food Res. Dev., 36(2015), No. 18, p. 145.
|
| [17] |
L.J. Yu, J.M. Zheng, and W.L. Zhu, Determination of ethanol in alcohol by fourier transform infrared spectroscopy, Guangzhou Chem. Ind., 39(2011), No. 4, p. 112.
|
| [18] |
F.L. Zhang, Fast determination of dimethyl eEther content in liquefied petroleum gas by fourier transform infrared spectrometry method, Low Temp. Specialty Gases, 29(2011), No. 3, p. 26.
|
| [19] |
A. Reheman, J.Y. He, M. Kaiheriman, A. Maimaitinasir, and A. Sidike, Structure characterization and luminescent properties of natural sodalite incorporated with albite, Mater. Prot., 47(2014), No. 1, p. 98.
|
| [20] |
R. Chancey, P. Stutzman, M.G.G. Juenger, and D.W. Fowler, Comprehensive phase characterization of crystalline and amorphous phases of a Class F fly ash, Cem. Concr. Res., 40(2010), No. 1, p. 146. doi: 10.1016/j.cemconres.2009.08.029
|
| [21] |
P.Q. Zhao, X.P. Liu, T.L. de la Torre, L.C. Lu, and K. Sobolev, Assessment of the quantitative accuracy of Rietveld/XRD analysis of crystalline and amorphous phases in fly ash, Anal. Methods, 9(2017), No. 16, p. 2415. doi: 10.1039/C7AY00337D
|
| [22] |
Z.H. Sun, W.J. Bao, H.Q. Li, J.B. Hui, C.H. Wang, and Q. Tang, Mineral phase change of high-alumina fly ash during desilication and extraction of Al2O3 by alkali dissolution process, Chin. J. Process Eng., 13(2013), No. 3, p. 403.
|
| [23] |
J.D. Monzón, A.M. Pereyra, M.S. Conconi, and E.I. Basaldella, Phase transformations during the zeolitization of fly ashes, J. Environ. Chem. Eng., 5(2017), No. 2, p. 1548. doi: 10.1016/j.jece.2017.02.022
|
| [24] |
C.L. Bo, S.L. Zheng, S.H. Ma, and H. Xie, Leaching behaviors of aluminum and silicon compounds in aluminum-rich fly ash in dilute alkaline solution, Chin. J. Process Eng., 12(2012), No. 4, p. 613.
|
| [25] |
Y.C. Ma, S.J. Wang, Y. Song, Y.P. Xu, Z.J. Tian, J.Y. Yu, and L.W. Lin, Ionothermal synthesis of sodalite microspheres, Chin. J. Inorg. Chem., 26(2010), No. 11, p. 1923.
|
| [26] |
H.Q. Li, D.H. Xu, C.H. Wang, J.B. Hui, W.J. Bao, and Z.H. Sun, Technical study of leaching alumina from high-alumina coal fly ash by pre-desilication two-step alkali hydrothermal process, Light Met., (2016), No. 12, p. 5.
|
| [27] |
S.Y. He, H.Q. Li, S.P. Li, Y.H. Li, and Q. Xie, Kinetics of desilication process of fly ash with high aluminum from pulverized coal fired boiler in alkali solution, Chin. J. Nonferrous Met., 24(2014), No. 7, p. 1888.
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载:
