Cite this article as:

Jashandeep Singh, and Ashok Kumar, Investigation of structural, morphological and electrochemical properties of mesoporous La2CuCoO6 rods fabricated by facile hydrothermal route, Int. J. Miner. Metall. Mater., 27(2020), No. 7, pp. 987-995. https://doi.org/10.1007/s12613-020-2011-6
Jashandeep Singh, and Ashok Kumar, Investigation of structural, morphological and electrochemical properties of mesoporous La2CuCoO6 rods fabricated by facile hydrothermal route, Int. J. Miner. Metall. Mater., 27(2020), No. 7, pp. 987-995. https://doi.org/10.1007/s12613-020-2011-6
引用本文 PDF XML SpringerLink

Investigation of structural, morphological and electrochemical properties of mesoporous La2CuCoO6 rods fabricated by facile hydrothermal route

Abstract: This work introduces the facile hydrothermal synthesis of double perovskite La2CuCoO6. X-ray diffraction pattern confirmed the formation of a monoclinic phase with P121/c1 symmetry. Transmission electron microscopy results revealed that the self-assembled porous rods were composed of nanocrystallite aggregates. The estimated specific surface area of these mesoporous rods with an average pore diameter of 6 nm was ~41 m2·g–1. The presence of ions with oxidation states of La3+, Cu2+, and Co2+/Co3+ on the surface of the mesoporous La2CuCoO6 rods was confirmed by X-ray photoelectron spectroscopic analysis. Via cyclicvoltammetry and chronopotentiometry, the electrode fabricated from the mesoporous La2CuCoO6 rods were found to exhibit pseudocapacitive behavior with a specific capacitance of 259.4 F·g–1 at a current density of 0.5 A·g–1. An ~89% retention in specific capacitance was achieved after 1000 charge/discharge cycles at a constant current density of 4 A·g–1.

 

/

返回文章
返回