| Cite this article as: |
Gui-lin Wang, Jian Kang, Jian-liang Zhang, Yao-zu Wang, Zhi-yu Wang, Zheng-jian Liu, and Chen-yang Xu, Softening–melting behavior of mixed burden based on low-magnesium sinter and fluxed pellets, Int. J. Miner. Metall. Mater., 28(2021), No. 4, pp. 621-628. https://doi.org/10.1007/s12613-020-2047-7
|
A low MgO content in sinter is conducive to reduce the MgO content in blast furnace slag. This study investigated the effect of MgO content in sinter on the softening–melting behavior of the mixed burden based on fluxed pellets. When the MgO content increased from 1.31wt% to 1.55wt%, the melting temperature of sinter increased to 1521°C. Such an increase was due to the formation of the high-melting-point slag phase. The reduction degradation index of sinter with 1.31wt% MgO content was better than that of others. The initial softening temperature of the mixed burden increased from 1104 to 1126°C as MgO content in sinter increased from 1.31wt% to 1.55wt%, and the melting temperature decreased from 1494 to 1460°C. The permeability index (S-value) of mixed burden decreased to 594.46 kPa·°C under a high MgO content with 1.55wt%, indicating that the permeability was improved. The slag phase composition of burden was mainly akermarite (Ca2MgSiO7) when the MgO content in sinter was 1.55wt%. The melting point of akermarite is 1450°C, which is lower than other phases.
| [1] |
Z.G. Liu, M.S. Chu, H.T. Wang, W. Zhao, and X.X. Xue, Effect of MgO content in sinter on the softening–melting behavior of mixed burden made from chromium-bearing vanadium–titanium magnetite, Int. J. Miner. Metall. Mater., 23(2016), No. 1, p. 25. doi: 10.1007/s12613-016-1207-2
|
| [2] |
Z.Y. Chang, P. Wang, J.L. Zhang, K.X. Jiao, Y.Q. Zhang, and Z.J. Liu, Effect of CO2 and H2O on gasification dissolution and deep reaction of coke, Int. J. Miner. Metall. Mater., 25(2018), No. 12, p. 1402. doi: 10.1007/s12613-018-1694-4
|
| [3] |
J.S. Shiau, S.H. Liu, and C.K. Ho, Effect of magnesium and aluminum oxides on fluidity of final blast furnace slag and its application, Mater. Trans., 53(2012), No. 8, p. 1449. doi: 10.2320/matertrans.M2012170
|
| [4] |
C. Han, M. Chen, W.D. Zhang, Z.X. Zhao, T. Evans, A.V. Nguyen, and B.J. Zhao, Viscosity model for iron blast furnace slags in SiO2–Al2O3–CaO–MgO system, Steel Res. Int., 86(2015), No. 6, p. 678. doi: 10.1002/srin.201400340
|
| [5] |
K. Higuchi, M. Naito, M. Nakano, and Y. Takamoto, Optimization of chemical composition and microstructure of iron ore sinter for low-temperature drip of molten iron with high permeability, ISIJ Int., 44(2004), No. 12, p. 2057. doi: 10.2355/isijinternational.44.2057
|
| [6] |
H. Kimura and F. Tsukihashi, Phase diagram for the CaO–SiO2–FeOx system and melting behavior, [in] Science and Technology of Innovative Ironmaking for Aiming at Energy Half Consumption, Iron and Steel Institute of Japan, Tokyo, 2003, p. 83.
|
| [7] |
M. Matsumura, K. Sunahara, and Y.M. Hoshi, Effect of dolomite sinter under high temperature sinter condition on soften properties, CAMP-ISIJ, 17(2004), No. 4, p. 812.
|
| [8] |
M. Nakano, M. Naito, K. Higuchi, and K. Morimoto, Non-spherical carbon composite agglomerates: Lab-scale manufacture and quality assessment, ISIJ Int., 44(2004), No. 12, p. 2079. doi: 10.2355/isijinternational.44.2079
|
| [9] |
L.H. Zhang, S.T. Yang, W.D. Tang, and X.X. Xue, Investigations of MgO on sintering performance and metallurgical property of high-chromium vanadium–titanium magnetite, Minerals, 9(2019), No. 5, p. 324. doi: 10.3390/min9050324
|
| [10] |
T. Umadevi, P.C. Mahapatra, and M. Prabhu, Influence of MgO addition on microstructure and properties of low and high silica iron ore sinter, Miner. Process. Extr. Metall., 122(2013), No. 4, p. 238. doi: 10.1179/1743285513Y.0000000046
|
| [11] |
X. Jiang, G.S. Wu, G. Wei, X.G. Li, and F.M. Shen, Effect of MgO on sintering process and metallurgical properties of sinter, Iron Steel, 41(2006), No. 3, p. 8.
|
| [12] |
M. Zhou, S.T. Yang, T. Jiang, and X.X. Xue, Influence of MgO in form of magnesite on properties and mineralogy of high chromium, vanadium, titanium magnetite sinters, Ironmaking Steelmaking, 42(2015), No. 3, p. 217. doi: 10.1179/1743281214Y.0000000223
|
| [13] |
A.Y. Zheng, Z.J. Liu, D.Q. Cang, Y.Z. Wang, and J.L. Zhang, Effects of MgO on the mineral structure and softening–melting property of Ti-containing sinte, Chin. J. Eng., 40(2018), No. 2, p. 184.
|
| [14] |
M.F. Jin, G.S. Li, M.S. Chu, and F.M. Shen, Diffusion between MgO and hematite during sintering, Iron Steel, 43(2008), No. 3, p. 10.
|
| [15] |
L.X. Qian, T.J. Chun, H.M. Long, and Q.M. Meng, Detection of the assimilation characteristics of iron ores: Dynamic resistance measurements, Int. J. Miner. Metall. Mater., 27(2020), No. 1, p. 18. doi: 10.1007/s12613-019-1869-7
|
| [16] |
J.X. Liu, G.J. Cheng, Z.G. Liu, M.S. Chu, and X.X. Xue, Softening and melting properties of different burden structures containing high chromic vanadium titano-magnetite, Int. J. Miner. Process., 142(2015), p. 113. doi: 10.1016/j.minpro.2015.04.020
|
| [17] |
M.M. Sun, J.L. Zhang, K.J. Li, K. Guo, Z.M. Wang, and C.H. Jiang, Gasification kinetics of bulk coke in the CO2/CO/H2/H2O/N2 system simulating the atmosphere in the industrial blast furnace, Int. J. Miner. Metall. Mater., 26(2019), No. 10, p. 1247. doi: 10.1007/s12613-019-1846-1
|
| [18] |
H.J. Zhang, X.F. She, Y.H. Han, J.S.Wang, F.B. Zeng, and Q.G. Xue, Softening and melting behavior of ferrous burden under simulated oxygen blast furnace condition, J. Iron Steel Res., 22(2015), No. 4, p. 297. doi: 10.1016/S1006-706X(15)30003-0
|
| [19] |
H.B. Zhu, W.L. Zhan, Z.J. He, Y.C. Yu, Q.H. Pang, and J.H. Zhang, Pore structure evolution during the coke graphitization process in a blast furnace, Int. J. Miner. Metall. Mater., 27(2020), No. 9, p. 1226. doi: 10.1007/s12613-019-1927-1
|
| [20] |
H.T. Wang, W. Zhao, M.S. Chu, R. Wang, Z.G. Liu, and X.X. Xue, Effect and function mechanism of sinter basicity on softening–melting behaviors of mixed burden made from chromium-bearing vanadium-titanium magnetite, J. Cent. South Univ., 24(2017), No. 1, p. 39. doi: 10.1007/s11771-017-3406-z
|
| [21] |
F. Zhang, D.Q. Zhu, J. Pan, Y.P. Mo, and Z.Q. Guo, Improving the sintering performance of blends containing Canadian specularite concentrate by modifying the binding medium, Int. J. Miner. Metall. Mater., 25(2018), No. 6, p. 598. doi: 10.1007/s12613-018-1607-6
|
| [22] |
S.L. Wu, B.Y. Tuo, L.H. Zhang, K.P. Du, and Y. Sun, New evaluation methods discussion of softening–melting and dropping characteristic of BF iron bearing burden, Steel Res. Int., 85(2014), No. 2, p. 233. doi: 10.1002/srin.201300061
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载:
