| Cite this article as: |
Ji-wei Bao, Zheng-gen Liu, Man-sheng Chu, Dong Han, Lai-geng Cao, Jun Guo, and Zi-chuan Zhao, Multi-objective collaborative optimization of metallurgical properties of iron carbon agglomerates using response surface methodology, Int. J. Miner. Metall. Mater., 28(2021), No. 12, pp. 1917-1928. https://doi.org/10.1007/s12613-020-2188-8
|
Iron carbon agglomerates (ICA) are used to realize low-carbon blast furnace ironmaking. In this study, the central composite design based on response surface methodology was used to synergistically optimize the compressive strength, reactivity, and post-reaction strength of ICA. Results show that the iron ore addition ratio significantly influences the compressive strength, reactivity, and post-reaction strength of ICA. The iron ore addition ratio and carbonization temperature or the iron ore addition ratio and carbonization time exert significant interaction effects on the compressive strength and reactivity of ICA, but it has no interaction effects on the post-reaction strength of ICA. In addition, the optimal process parameters are as follows: iron ore addition ratio of 15.30wt%, carbonization temperature of 1000°C, and carbonization time of 4.27 h. The model prediction results of compressive strength, reactivity, and post-reaction strength are 4026 N, 55.03%, and 38.24%, respectively, which are close to the experimental results and further verify the accuracy and reliability of the models.
| [1] |
IEA(2020), CO2 Emissions from Fuel Combustion [2021-02-15]. https://www.iea.org/statistics/topics/CO2emissions
|
| [2] |
H.T. Wang, M.S. Chu, W. Zhao, Z.G. Liu, and J. Tang, Influence of iron ore addition on metallurgical reaction behavior of iron coke hot briquette, Metall. Mater. Trans. B, 50(2019), No. 1, p. 324. doi: 10.1007/s11663-018-1481-7
|
| [3] |
Z.L. Zhang, J.L. Meng, L. Guo, and Z.C. Guo, Numerical study of the reduction process in an oxygen blast furnace, Metall. Mater. Trans. B, 47(2016), No. 1, p. 467. doi: 10.1007/s11663-015-0483-y
|
| [4] |
W.Q. Xu, W.J. Cao, T.Y. Zhu, Y.J. Li, and B. Wan, Material flow analysis of CO2 emissions from blast furnace and basic oxygen furnace steelmaking systems in China, Steel Res. Int., 86(2015), No. 9, p. 1063. doi: 10.1002/srin.201400228
|
| [5] |
J. Tang, M.S. Chu, F. Li, C. Feng, Z.G. Liu, and Y.S. Zhou, Development and progress on hydrogen metallurgy, Int. J. Miner. Metall. Mater., 27(2020), No. 6, p. 713. doi: 10.1007/s12613-020-2021-4
|
| [6] |
M. Naito, A. Okamoto, K. Yamaguchi, T. Yamaguchi, and Y. Inoue, Improvement of blast furnace reaction efficiency by use of high reactivity coke, Tetsu-to-Hagané, 87(2001), No. 5, p. 357. doi: 10.2355/tetsutohagane1955.87.5_357
|
| [7] |
M. Naito, A. Okamoto, K. Yamaguchi, T. Yamaguchi, and Y. Inoue, Improvement of blast furnace reaction efficiency by temperature control of thermal reserve zone, Nippon Steel Tech. Rep., 2006, No. 94, p. 103.
|
| [8] |
S. Nomura, K. Higuchi, K. Kunitomo, and M. Naito, Reaction behavior of formed iron coke and its effect on decreasing thermal reserve zone temperature in blast furnace, ISIJ Int., 50(2010), No. 10, p. 1388. doi: 10.2355/isijinternational.50.1388
|
| [9] |
M. Naito, S. Nomura, and K. Kato, Development of production and utilization technology of coke with high strength and high reactivity, Tetsu-to-Hagané, 96(2010), No. 5, p. 17. doi: 10.2355/tetsutohagane.96.201
|
| [10] |
S. Nomura, H. Terashima, E. Sato, and M. Naito, Some fundamental aspects of highly reactive iron coke production, ISIJ Int., 47(2007), No. 6, p. 823. doi: 10.2355/isijinternational.47.823
|
| [11] |
T. Anyashiki, H. Fujimoto, T. Yamamoto, T. Sato, H. Matsuno, M. Sato, and K. Takeda, Basic examination of briquetting technology for ferro-coke process on 0.5 t/d bench scale plant, Tetsu-to-Hagané, 101(2015), No. 10, p. 515. doi: 10.2355/tetsutohagane.TETSU-2015-038
|
| [12] |
H.T. Wang, M.S. Chu, W. Zhao, R. Wang, Z.G. Liu, and J. Tang, Fundamental research on iron coke hot briquette − a new type burden used in blast furnace, Ironmaking Steelmaking, 43(2016), No. 8, p. 571. doi: 10.1080/03019233.2016.1152344
|
| [13] |
H.T. Wang, W. Zhao, M.S. Chu, Z.G. Liu, J. Tang, and Z.W. Ying, Effects of coal and iron ore blending on metallurgical properties of iron coke hot briquette, Powder Technol., 328(2018), p. 318. doi: 10.1016/j.powtec.2018.01.027
|
| [14] |
A. Uchida, Y.Yamazaki, S. Matsuo, Y. Saito, Y. Matsushita, H. Aoki, and M. Hamaguchi, Effect of iron ore reduction on ferro-coke strength with hyper-coal addition, ISIJ Int., 105(2016), No. 12, p. 2132. doi: 10.2355/isijinternational.ISIJINT-2016-339
|
| [15] |
K. Nishioka, Y. Ujisawa, and T. Inada, Effect of large quantity of ferrocoke charging on reduction of reducing agent rate of blast furnace, Tetsu-to-Hagané, 100(2014), No. 11, p. 1347. doi: 10.2355/tetsutohagane.100.1347
|
| [16] |
S.Z. Shi, Q. Zheng, X.G. Bi, Y.G. Mao, G.E. Wang, and Y.H. Luo, Model-based ferro-coke strength prediction and analysis of its control measures, J. Taiyuan Univ. Technol., 48(2017), No. 1, p. 36.
|
| [17] |
E. Hosseini, F. Rashchi, and A. Ataie, Ti leaching from activated ilmenite-Fe mixture at different milling energy levels, Int. J. Miner. Metall. Mater., 25(2018), No. 11, p. 1263. doi: 10.1007/s12613-018-1679-3
|
| [18] |
N. Vieceli, C.A. Nogueira, M.F.C. Pereira, F.O. Durao, C. Guimaraes, and F. Margarido, Optimization of an innovative approach involving mechanical activation and acid digestion for the extraction of lithium from lepidolite, Int. J. Miner. Metall. Mater., 25(2018), No. 1, p. 11. doi: 10.1007/s12613-018-1541-7
|
| [19] |
Y.T. Wang, S.L. Jiang, H.L. Wang, and H.Y. Bie, A mucoadhesive, thermoreversible in situ nasal gel of geniposide for neurodegenerative diseases, Plos One, 12(2017), No. 12, p. 1. doi: 10.1371/journal.pone.0189478
|
| [20] |
Z.J. Yang, K.K. Wang, and Y. Yang, Optimization of ECAP−RAP process for preparing semisolid billet of 6061 aluminum alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 6, p. 792. doi: 10.1007/s12613-019-1895-5
|
| [21] |
M. Mondal, A. Ghosh, K. Gayen, G. Halder, and O.N. Tiwari, Carbon dioxide bio-fixation by Chlorella sp. BTA 9031 towards biomass and lipid production: Optimization using Central Composite Design approach, J. CO2 Util., 22(2017), p. 317.
|
| [22] |
L. Kun, L.L. Zhang, L. Wei, C.S. Okinda, and M.X. Shen, Optimization of compression formulation and load of food-grade tracers for grain traceability using central composite design, Int. J. Agric. Biol. Eng., 10(2017), No. 6, p. 221.
|
| [23] |
M.D. Turan, Optimization of selective copper extraction from chalcopyrite concentrate in presence of ammonium persulfate and ammonium hydroxide, Int. J. Miner. Metall. Mater., 26(2019), No. 8, p. 946. doi: 10.1007/s12613-019-1804-y
|
| [24] |
S.N.A.M. Hassan, M.A.M. Ishak, and K. Ismail, Optimizing the physical parameters to achieve maximum products from co-liquefaction using response surface methodology, Fuel, 207(2017), p. 102. doi: 10.1016/j.fuel.2017.06.077
|
| [25] |
D. Singh, P.M. Pandey, and D. Kalyanasundaram, Optimization of pressure-less microwave sintering of Ti6Al4V by response surface methodology, Mater. Manuf. Process., 33(2018), No. 16, p. 1835. doi: 10.1080/10426914.2018.1476765
|
| [26] |
China National Standardization Administration Committee, Chinese National Standard GB/T 4000-2017: Determination of Coke Reactivity Index (CRI) and Coke Strength after Reaction (CSR), Standards Press of China, 2017.
|
| [27] |
S.K. Singh, P. Singha, and K. Muthukumarappan, Modeling and optimizing the effect of extrusion processing parameters on nutritional properties of soy white flakes-based extrudates using response surface methodology, Anim. Feed. Sci. Technol., 254(2019), art. No. 114197. doi: 10.1016/j.anifeedsci.2019.06.001
|
| [28] |
S. Kim, S.C. Ko, Y.S. Kim, S.K. Ha, H.Y. Park, Y. Park, and S.H. Lee, Determination of Curcuma longa L. (Turmeric) leaf extraction conditions using response surface methodology to optimize extraction yield and antioxidant content, J. Food Quality, 2019(2019), p. 1. doi: 10.1155/2019/7575206
|
| [29] |
X.R. Zhang, Z.H. Liu, X. Fan, X. Lian, and C.Y. Tao, Optimization of reaction conditions for the electroleaching of manganese from low-grade pyrolusite, Int. J. Miner. Metall. Mater., 22(2015), No. 11, p. 1121. doi: 10.1007/s12613-015-1176-x
|
| [30] |
J.Jiang, Y.P. Chen, J.Z. Cao, and C.T. Mei, Improved hydrophobicity and dimensional stability of wood treated with paraffin/acrylate compound emulsion through response surface methodology optimization, Polymers, 12(2020), No. 1, art. No. 86. doi: 10.3390/polym12010086
|
| [31] |
B.D. Flores, A. Guerrero, I.V. Flores, A.G. Borrego, M.A. Diez, E. Osorio, and A.C.F. Vilela, On the reduction behavior, structural and mechanical features of iron ore-carbon briquettes, Fuel Process. Technol., 155(2017), p. 238. doi: 10.1016/j.fuproc.2016.07.004
|
| [32] |
China National Standardization Administration Committee, Chinese National Standard GB/T 1996―2017: Coke for Metallurgy, Standards Press of China, 2017.
|
本系统由
北京仁和汇智信息技术有限公司
开发
下载:
