留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 29 Issue 9
Sep.  2022
Turn off MathJax
目录

图(11)  / 表(3)

数据统计

分享

计量
  • 文章访问数:  1282
  • HTML全文浏览量:  513
  • PDF下载量:  99
  • 被引次数: 0
文章导航 >  矿物冶金与材料学报（英文）  > 2022  >  29(9): 1705-1714
Long Wang, Liang Chen, Weizao Liu, Guoquan Zhang, Shengwei Tang, Hairong Yue, Bin Liang, and Dongmei Luo, Recovery of titanium, aluminum, magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing–leaching, Int. J. Miner. Metall. Mater., 29(2022), No. 9, pp. 1705-1714. https://doi.org/10.1007/s12613-021-2293-3
Cite this article as:
Long Wang, Liang Chen, Weizao Liu, Guoquan Zhang, Shengwei Tang, Hairong Yue, Bin Liang, and Dongmei Luo, Recovery of titanium, aluminum, magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing–leaching, Int. J. Miner. Metall. Mater., 29(2022), No. 9, pp. 1705-1714. https://doi.org/10.1007/s12613-021-2293-3
shu
引用本文 PDF XML SpringerLink
研究论文

硫酸固化–浸出含钛高炉渣回收钛、铝、镁并分离硅

  • 1)

    四川大学化学工程学院, 成都 610065, 中国

  • 2)

    重庆大学材料科学与工程学院, 重庆 400044, 中国

  • 通讯作者:

    罗冬梅    E-mail: dmluo@scu.edu.cn

  • 本研究采用了一种节能路线处理含钛高炉渣，即低温硫酸固化，低浓度硫酸溶液浸出的方法同时提取钛、铝、镁。系统地研究了硫酸固化–浸出含钛高炉渣的工艺参数，在最佳条件下钛、铝、镁的回收率分别达到85.96%、81.17%、93.82%。采用快速浸出模型，限制硅的溶解和聚合，硅的溶出率仅3.18%。研究了硫酸固化-浸出的机理。在硫酸固化过程中反应快速发生并急剧放热，在氢离子的进攻下，渣的结构被破坏，硅酸盐解聚形成可滤性二氧化硅，钛、铝、镁、钙离子被置换形成硫酸盐包裹在无定型二氧化硅颗粒表面。浸出液中钛、铝、镁得到回收，浸出残渣中富集硫酸钙和二氧化硅。该方法有效避免浸出过程硅溶胶的形成，固液分离得到加速。
    • Research Article

    Recovery of titanium, aluminum, magnesium and separating silicon from titanium-bearing blast furnace slag by sulfuric acid curing–leaching

    + Author Affiliations
      Abstract
    • An energy-efficient route was adopted to treat titanium-bearing blast furnace slag (TBBFS) in this study. Titanium, aluminum, and magnesium were simultaneously extracted and silicon was separated by low temperature sulfuric acid curing and low concentration sulfuric acid leaching. The process parameters of sulfuric acid curing TBBFS were systematically studied. Under the optimal conditions, the recovery of titanium, aluminum, and magnesium reached 85.96%, 81.17%, and 93.82%, respectively. The rapid leaching model was used to limit the dissolution and polymerization of silicon, and the dissolution of silicon was only 3.18%. The mechanism of sulfuric acid curing–leaching was investigated. During the curing process, the reaction occurred rapidly and released heat massively. Under the attack of hydrogen ions, the structure of TBBFS was destroyed, silicate was depolymerized to form filterable silica, and titanium, magnesium, aluminum, and calcium ions were replaced to form sulfates and enriched on the surface of silica particles. Titanium, aluminum, and magnesium were recovered in the leaching solution, and calcium sulfate and silica were enriched in the residue after leaching. This method could effectively avoid the formation of silica sol during the leaching process and accelerate the solid–liquid separation.
      • FullText(HTML)
    • loading
      • Supplements(0)
      • References(41)
    • [1]
      U. Srivastava and S.K. Kawatra, Strategies for processing low-grade iron ore minerals, Miner. Process. Extr. Metall. Rev., 30(2009), No. 4, p. 361. doi: 10.1080/08827500903185208
      [2]
      U. Srivastava, S.K. Kawatra, and T.C. Eisele, Production of pig iron by utilizing biomass as a reducing agent, Int. J. Miner. Process., 119(2013), p. 51. doi: 10.1016/j.minpro.2012.12.008
      [3]
      Y.M. Zhang, L.N. Wang, D.S. Chen, W.J. Wang, Y.H. Liu, H.X. Zhao, and T. Qi, A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite, Int. J. Miner. Metall. Mater., 25(2018), No. 2, p. 131. doi: 10.1007/s12613-018-1556-0
      [4]
      B. Das, S. Prakash, P.S.R. Reddy, and V.N. Misra, An overview of utilization of slag and sludge from steel industries, Resour. Conserv. Recycl., 50(2007), No. 1, p. 40. doi: 10.1016/j.resconrec.2006.05.008
      [5]
      E. Özbay, M. Erdemir, and H.İ. Durmuş, Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review, Constr. Build. Mater., 105(2016), p. 423. doi: 10.1016/j.conbuildmat.2015.12.153
      [6]
      S.K. Tripathy, J. Dasu, Y.R. Murthy, G. Kapure, A.R. Pal, and L.O. Filippov, Utilisation perspective on water quenched and air-cooled blast furnace slags, J. Cleaner Prod., 262(2020), art. No. 121354. doi: 10.1016/j.jclepro.2020.121354
      [7]
      Y.L. Zhen, G.H. Zhang, and K.C. Chou, Mechanism and kinetics of the carbothermic reduction of titanium-bearing blast furnace slag, Metall. Res. Technol., 113(2016), No. 5, art. No. 507. doi: 10.1051/metal/2016039
      [8]
      P. Lu, Progress and prospect of industrialization of comprehensive utilization of pangang blast furnace slag (high titanium content), Iron Steel Vanadium Titanium, 34(2013), No. 3, p. 33.
      [9]
      F. Valighazvini, F. Rashchi, and R. Khayyam Nekouei, Recovery of titanium from blast furnace slag, Ind. Eng. Chem. Res., 52(2013), No. 4, p. 1723. doi: 10.1021/ie301837m
      [10]
      F. Yan, C. Li, and B. Liang, A two-step sulfuric acid leaching process of Ti-bearing blast furnace slag, Chin. J. Process Eng., (2006), No. 3, p. 413.
      [11]
      S.Q. Zhang, W.Q. Wang, Y. Zheng, P.K. Ren, W. Yan, and J. Deng, Study on the flotation separation of modified Ti-bearing blast furnace slag, Iron Steel Vanadium Titanium, 38(2017), No. 3, p. 71.
      [12]
      M.Z. Wu, H.H. Lü, M.C. Liu, Z.L. Zhang, X.R. Wu, W.M. Liu, P. Wang, and L.S. Li, Direct extraction of perovskite CaTiO3 via efficient dissociation of silicates from synthetic Ti-bearing blast furnace slag, Hydrometallurgy, 167(2017), p. 8. doi: 10.1016/j.hydromet.2016.10.026
      [13]
      S.Q. He, H.J. Sun, D.Y. Tan, and T.J. Peng, Recovery of titanium compounds from Ti-enriched product of alkali melting Ti-bearing blast furnace slag by dilute sulfuric acid leaching, Procedia Environ. Sci., 31(2016), p. 977. doi: 10.1016/j.proenv.2016.03.003
      [14]
      D. Wang, J.L. Chu, Y.H. Liu, J. Li, T.Y. Xue, W.J. Wang, and T. Qi, Novel process for titanium dioxide production from titanium slag: NaOH–KOH binary molten salt roasting and water leaching, Ind. Eng. Chem. Res., 52(2013), No. 45, p. 15756. doi: 10.1021/ie400701g
      [15]
      P. Liu, L.B. Zhang, B.G. Liu, G.J. He, J.H. Peng, and M.Y. Huang, Determination of dielectric properties of titanium carbide fabricated by microwave synthesis with Ti-bearing blast furnace slag, Int. J. Miner. Metall. Mater., 28(2021), No. 1, p. 88. doi: 10.1007/s12613-020-1985-4
      [16]
      X.F. Lei and X.X. Xue, Preparation, characterization and photocatalytic activity of sulfuric acid-modified titanium-bearing blast furnace slag, Trans. Nonferrous Met. Soc. China, 20(2010), No. 12, p. 2294. doi: 10.1016/S1003-6326(10)60643-7
      [17]
      C.H. Chen, K.Q. Feng, Y. Zhou, and H.L. Zhou, Effect of sintering temperature on the microstructure and properties of foamed glass-ceramics prepared from high-titanium blast furnace slag and waste glass, Int. J. Miner. Metall. Mater., 24(2017), No. 8, p. 931. doi: 10.1007/s12613-017-1480-8
      [18]
      L. Wang, W.Z. Liu, J.P. Hu, Q. Liu, H.R. Yue, B. Liang, G.Q. Zhang, D.M. Luo, H.P. Xie, and C. Li, Indirect mineral carbonation of titanium-bearing blast furnace slag coupled with recovery of TiO2 and Al2O3, Chin. J. Chem. Eng., 26(2018), No. 3, p. 583. doi: 10.1016/j.cjche.2017.06.012
      [19]
      S. Yin, T. Aldahri, S. Rohani, C. Li, D.M. Luo, G.Q. Zhang, H.R. Yue, B. Liang, and W.Z. Liu, Insights into the roasting kinetics and mechanism of blast furnace slag with ammonium sulfate for CO2 mineralization, Ind. Eng. Chem. Res., 58(2019), No. 31, p. 14026. doi: 10.1021/acs.iecr.9b03109
      [20]
      W.Z. Liu, L.M. Teng, S. Rohani, Z.F. Qin, B. Zhao, C.C. Xu, S. Ren, Q.C. Liu, and B. Liang, CO2 mineral carbonation using industrial solid wastes: A review of recent developments, Chem. Eng. J., 416(2021), art. No. 129093. doi: 10.1016/j.cej.2021.129093
      [21]
      W.Z. Liu, T. Aldahri, C.B. Xu, C. Li, and S. Rohani, Synthesis of sole gismondine-type zeolite from blast furnace slag during CO2 mineralization process, J. Environ. Chem. Eng., 9(2021), No. 1, art. No. 104652. doi: 10.1016/j.jece.2020.104652
      [22]
      Y.J. Xiong, T. Aldahri, W.Z. Liu, G.R. Chu, G.Q. Zhang, D.M. Luo, H.R. Yue, B. Liang, and C. Li, Simultaneous preparation of TiO2 and ammonium alum, and microporous SiO2 during the mineral carbonation of titanium-bearing blast furnace slag, Chin. J. Chem. Eng., 28(2020), No. 9, p. 2256. doi: 10.1016/j.cjche.2020.03.020
      [23]
      Y. Hua, Z. Lin, and Z. Yan, Application of microwave irradiation to quick leach of zinc silicate ore, Miner. Eng., 15(2002), No. 6, p. 451. doi: 10.1016/S0892-6875(02)00050-X
      [24]
      H.S. Xu, C. Wei, C.X. Li, G. Fan, Z.G. Deng, M.T. Li, and X.B. Li, Sulfuric acid leaching of zinc silicate ore under pressure, Hydrometallurgy, 105(2010), No. 1-2, p. 186. doi: 10.1016/j.hydromet.2010.07.014
      [25]
      W.L. Nie, S.M. Wen, Q.C. Feng, D. Liu, and Y.W. Zhou, Mechanism and kinetics study of sulfuric acid leaching of titanium from titanium-bearing electric furnace slag, J. Mater. Res. Technol., 9(2020), No. 2, p. 1750. doi: 10.1016/j.jmrt.2019.12.006
      [26]
      R.E. Dufresne, Quick leach of siliceous zinc ores, JOM, 28(1976), No. 2, p. 8. doi: 10.1007/BF03354269
      [27]
      Y.D. Zhang, Y.X. Hua, X.B. Gao, C.Y. Xu, J. Li, Y. Li, Q.B. Zhang, L. Xiong, Z.L. Su, M.M. Wang, and J.J. Ru, Recovery of zinc from a low-grade zinc oxide ore with high silicon by sulfuric acid curing and water leaching, Hydrometallurgy, 166(2016), p. 16. doi: 10.1016/j.hydromet.2016.08.010
      [28]
      D.M. Kazadi, D.R. Groot, J.D. Steenkamp, and H. Pöllmann, Control of silica polymerisation during ferromanganese slag sulphuric acid digestion and water leaching, Hydrometallurgy, 166(2016), p. 214. doi: 10.1016/j.hydromet.2016.06.024
      [29]
      T. Jiang, H.G. Dong, Y.F. Guo, G.H. Li, and Y.B. Yang, Study on leaching Ti from Ti bearing blast furnace slag by sulphuric acid, Miner. Process. Extr. Metall., 119(2010), No. 1, p. 33. doi: 10.1179/037195509X12585446038807
      [30]
      Z.H. Wang, L. Chen, T. Aldahrib, C. Li, W.Z. Liu, G.Q. Zhang, Y.H. Yang, and D.M. Luo, Direct recovery of low valence vanadium from vanadium slag—Effect of roasting on vanadium leaching, Hydrometallurgy, 191(2020), art. No. 105156. doi: 10.1016/j.hydromet.2019.105156
      [31]
      P.R. Aravind, P. Mukundan, P. Krishna Pillai, and K.G.K. Warrier, Mesoporous silica-alumina aerogels with high thermal pore stability through hybrid sol–gel route followed by subcritical drying, Microporous Mesoporous Mater., 96(2006), No. 1-3, p. 14. doi: 10.1016/j.micromeso.2006.06.014
      [32]
      A. Matsuda, Y. Higashi, K. Tadanaga, and M. Tatsumisago, Hot-water treatment of sol–gel derived SiO2-TiO2 microparticles and application to electrophoretic deposition for thick films, J. Mater. Sci., 41(2006), No. 24, p. 8101. doi: 10.1007/s10853-006-0419-7
      [33]
      L. Wen, Mineral Infrared Spectroscopy, Chongqing University Press, Chongqing, 1989, p. 71.
      [34]
      W. Yan, B.L. Zeng, J. Meng, S.M. Wang, and S.W. Liang, Study on the identification of gypsum fibrosum with FTIR, Spectroscopy Spectal Anal., 36(2016), No. 7, p. 2098.
      [35]
      A. Hamoudi, L. Khouchaf, C. Depecker, B. Revel, L. Montagne, and P. Cordier, Microstructural evolution of amorphous silica following alkali–silica reaction, J. Non-Cryst. Solids, 354(2008), No. 45-46, p. 5074. doi: 10.1016/j.jnoncrysol.2008.07.001
      [36]
      J. Higl, D. Hinder, C. Rathgeber, B. Ramming, and M. Lindén, Detailed in situ ATR-FTIR spectroscopy study of the early stages of C–S–H formation during hydration of monoclinic C3S, Cem. Concr. Res., 142(2021), art. No. 106367. doi: 10.1016/j.cemconres.2021.106367
      [37]
      G.W. Sun, J.J. Zhang, and N. Yan, Microstructural evolution and characterization of ground granulated blast furnace slag in variant pH, Constr. Build. Mater., 251(2020), art. No. 118978. doi: 10.1016/j.conbuildmat.2020.118978
      [38]
      K. Zheng, J.L. Liao, X.D. Wang, and Z.T. Zhang, Raman spectroscopic study of the structural properties of CaO–MgO–SiO2–TiO2 slags, J. Non-Cryst. Solids, 376(2013), p. 209. doi: 10.1016/j.jnoncrysol.2013.06.003
      [39]
      R.G. Duan, K.M. Liang, and S.R. Gu, The effect of Ti4+ on the site of Al3+ in the structure of CaO–Al2O3–SiO2–TiO2 system glass, Mater. Sci. Eng. A, 249(1998), No. 1-2, p. 217. doi: 10.1016/S0921-5093(98)00570-X
      [40]
      C. Feng, L.H. Gao, J. Tang, Z.G. Liu, and M.S. Chu, Effects of MgO/Al2O3 ratio on viscous behaviors and structures of MgO–Al2O3–TiO2–CaO–SiO2 slag systems with high TiO2 content and low CaO/SiO2 ratio, Trans. Nonferrous Met. Soc. China, 30(2020), No. 3, p. 800. doi: 10.1016/S1003-6326(20)65255-4
      [41]
      S. Ren, T. Aldahri, W.Z. Liu, and B. Liang, CO2 mineral sequestration by using blast furnace slag: From batch to continuous experiments, Energy, 214(2021), art. No. 118975. doi: 10.1016/j.energy.2020.118975
      • Relative Articles
      Cited By

    Catalog


    • /

      返回文章
      返回

      版权所有 ©《矿物冶金与材料学报（英文）》编辑部

      地址：北京市海淀区学院路30号邮政编码：100083

      电子邮箱：journal@ustb.edu.cn电话：+86-10-62332875

      本系统由 北京仁和汇智信息技术有限公司 开发    百度统计