基于自组装二氧化钛空穴阻挡层的高效钙钛矿太阳能电池

却中保; 楚亮; 翟帅博; 冯奕霏; 陈晨; 刘维; 胡瑞媛; 胡静; 李兴鳌

doi:10.1007/s12613-021-2361-8

Volume 29 Issue 6

Jun. 2022

Turn off MathJax

图(5) / 表(1)

数据统计

计量

文章访问数: 992
HTML全文浏览量: 377
PDF下载量: 18
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2022 > 29(6): 1280-1285

Zhongbao Que, Liang Chu, Shuaibo Zhai, Yifei Feng, Chen Chen, Wei Liu, Ruiyuan Hu, Jing Hu, and Xing’ao Li, Self-assembled TiO₂ hole-blocking layers for efﬁcient perovskite solar cells, Int. J. Miner. Metall. Mater., 29(2022), No. 6, pp. 1280-1285. https://doi.org/10.1007/s12613-021-2361-8

Cite this article as:

Zhongbao Que, Liang Chu, Shuaibo Zhai, Yifei Feng, Chen Chen, Wei Liu, Ruiyuan Hu, Jing Hu, and Xing’ao Li, Self-assembled TiO2 hole-blocking layers for efﬁcient perovskite solar cells, Int. J. Miner. Metall. Mater., 29(2022), No. 6, pp. 1280-1285. https://doi.org/10.1007/s12613-021-2361-8

Citation:

PDF( 1686 KB)

引用本文 PDF XML SpringerLink

研究论文

基于自组装二氧化钛空穴阻挡层的高效钙钛矿太阳能电池

南京邮电大学江苏省新能源技术工程实验室 & 理学院 & 材料科学与工程学院& 电子与光学工程学院，南京 210023，中国

通讯作者:
楚亮 E-mail: chuliang@njupt.edu.cn

文章亮点

(1) 开发了免退火的自组装室温工艺制备TiO₂致密层并应用于钙钛矿太阳能电池。

(2) 阐述了室温沉积TiO₂的机理。

(3) 基于自组装TiO₂的全低温钙钛矿太阳能电池的能力转化效率为16.41%。

中文摘要

器件兼容功能层的自组装工艺是一种简单、可行和节能的策略。在介孔钙钛矿太阳能电池(perovskite solar cells, PSCs)中，致密的TiO₂膜起到空穴阻挡层的作用，而介孔的TiO₂膜起到电子传输层的作用。然而，这两层通常都要通过高温退火法获得。在此，我们通过室温自组装工艺沉积了致密的TiO₂薄膜，以作为PSCs有效的空穴阻挡层。通过沉积时间控制致密TiO₂薄膜的厚度。优化致密TiO₂薄膜的厚度(80 nm)，有无空穴传输层的介孔PSCs的能量转化效率分别为17.95%和10.66%。值得注意的是，基于自组装TiO₂的全低温PSCs显示出16.41%的能量转化效率。

关键词:

Research Article

Self-assembled TiO₂ hole-blocking layers for efﬁcient perovskite solar cells

+ Author Affiliations

Abstract

Abstract

The self-assembly process for compatible functional layers of devices is a simple, feasible, and energy-saving strategy. In mesoporous perovskite solar cells (PSCs), compact and scaffold TiO₂ films generally function as the hole-blocking and electron-transporting layers, respectively. However, both of these layers are usually generated through a high-temperature annealing process. Here, we deposited TiO₂ compact films through a room-temperature self-assembly process as effective hole-blocking layers for PSCs. The thickness of TiO₂ compact films can be easily controlled by the deposition time. Through the optimization of TiO₂ compact films (80 nm), the power conversion efficiency (PCE) of mesoporous PSCs without and with hole conductor layers increases up to 10.66% and 17.95%, respectively. Notably, an all-low-temperature planar PSC with the self-assembled TiO₂ layer exhibits a PCE of 16.41%.
- perovskite solar cells;
- titanium dioxide;
- self-assembly;
- power conversion efficiency

FullText(HTML)

Supplements(0)

References(36)

References

[1]	A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc., 131(2009), No. 17, p. 6050. doi: 10.1021/ja809598r
[2]	L. Chu and L.M. Ding, Self-assembled monolayers in perovskite solar cells, J. Semicond., 42(2021), No. 9, art. No. 090202. doi: 10.1088/1674-4926/42/9/090202
[3]	L. Chu, Pseudohalide anion engineering for highly efficient and stable perovskite solar cells, Matter, 4(2021), No. 6, p. 1762. doi: 10.1016/j.matt.2021.05.007
[4]	J. Yang, L. Chu, R.Y. Hu, W. Liu, N.J. Liu, Y.H. Ma, W. Ahmad, and X.A. Li, Work function engineering to enhance open-circuit voltage in planar perovskite solar cells by g-C₃N₄ nanosheets, Nano Res., 14(2021), No. 7, p. 2139. doi: 10.1007/s12274-021-3408-x
[5]	X.C. Zhang, Strain control for halide perovskites, Matter, 2(2020), No. 2, p. 294. doi: 10.1016/j.matt.2020.01.010
[6]	National Renewable Energy Laboratory, Best Research Cell Efficiency [2020-09-19]. https://www.nrel.gov/pv/cell-efficiency.html.
[7]	W.E.I. Sha, H. Zhang, Z.S. Wang, H.L. Zhu, X.G. Ren, F. Lin, A.K.Y. Jen, and W.C.H. Choy, Quantifying efficiency loss of perovskite solar cells by a modified detailed balance model, Adv. Energy Mater., 8(2018), No. 8, art. No. 1701586. doi: 10.1002/aenm.201701586
[8]	M.M. Lee, J. Teuscher, T. Miyasaka, T.N. Murakami, and H.J. Snaith, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites, Science, 338(2012), No. 6107, p. 643. doi: 10.1126/science.1228604
[9]	G.C. Xing, N. Mathews, S.Y. Sun, S.S. Lim, Y.M. Lam, M. Grätzel, S. Mhaisalkar, and T.C. Sum, Long-range balanced electron- and hole-transport lengths in organic–inorganic CH₃NH₃PbI₃, Science, 342(2013), No. 6156, p. 344. doi: 10.1126/science.1243167
[10]	S.D. Stranks, G.E. Eperon, G. Grancini, C. Menelaou, M.J.P. Alcocer, T. Leijtens, L.M. Herz, A. Petrozza, and H.J. Snaith, Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber, Science, 342(2013), No. 6156, p. 341. doi: 10.1126/science.1243982
[11]	P.F. Fu, S. Hu, J. Tang, and Z.W. Xiao, Material exploration via designing spatial arrangement of octahedral units: A case study of lead halide perovskites, Front. Optoelectron., 14(2021), No. 2, p. 252. doi: 10.1007/s12200-021-1227-z
[12]	J.H. Zheng, L.X. Zhu, Z.T. Shen, F.M. Li, L.Y. Ling, H.L. Li, and C. Chen, Effects of the incorporation amounts of CdS and Cd(SCN₂H₄)₂Cl₂ on the performance of perovskite solar cells, Int. J. Miner. Metall. Mater., 29(2022), No. 2, p. 283. doi: 10.1007/s12613-021-2316-0
[13]	Y. Xie, J. Yin, J. Zheng, Y. Fan, J. Wu, and X. Zhang, Facile RbBr interface modification improves perovskite solar cell efficiency, Mater. Today Chem., 14(2019), art. No. 100179. doi: 10.1016/j.mtchem.2019.07.001
[14]	W. Liu, N.J. Liu, S.L. Ji, H.F. Hua, Y.H. Ma, R.Y. Hu, J. Zhang, L. Chu, X.A. Li, and W. Huang, Perfection of perovskite grain boundary passivation by rhodium incorporation for efficient and stable solar cells, Nano Micro Lett., 12(2020), No. 1, art. No. 119. doi: 10.1007/s40820-020-00457-7
[15]	J. Wang, M.C. Qin, H. Tao, W.J. Ke, Z. Chen, J.W. Wan, P.L. Qin, L.B. Xiong, H.W. Lei, H.Q. Yu, and G.J. Fang, Performance enhancement of perovskite solar cells with Mg-doped TiO₂ compact film as the hole-blocking layer, Appl. Phys. Lett., 106(2015), No. 12, art. No. 121104. doi: 10.1063/1.4916345
[16]	J. Burschka, N. Pellet, S.J. Moon, R. Humphry-Baker, P. Gao, M.K. Nazeeruddin, and M. Grätzel, Sequential deposition as a route to high-performance perovskite-sensitized solar cells, Nature, 499(2013), No. 7458, p. 316. doi: 10.1038/nature12340
[17]	T.S. Su, T.Y. Hsieh, C.Y. Hong, and T.C. Wei, Electrodeposited ultrathin TiO₂ blocking layers for efficient perovskite solar cells, Sci. Rep., 5(2015), art. No. 16098. doi: 10.1038/srep16098
[18]	W.J. Ke, G.J. Fang, J. Wang, P.L. Qin, H. Tao, H.W. Lei, Q. Liu, X. Dai, and X.Z. Zhao, Perovskite solar cell with an efficient TiO₂ compact film, ACS Appl. Mater. Interfaces, 6(2014), No. 18, p. 15959. doi: 10.1021/am503728d
[19]	F. Di Giacomo, V. Zardetto, A. D'Epifanio, S. Pescetelli, F. Matteocci, S. Razza, A. Di Carlo, S. Licoccia, W.M.M. Kessels, M. Creatore, and T.M. Brown, Flexible perovskite photovoltaic modules and solar cells based on atomic layer deposited compact layers and UV-irradiated TiO₂ scaffolds on plastic substrates, Adv. Energy Mater., 5(2015), No. 8, art. No. 1401808. doi: 10.1002/aenm.201401808
[20]	S. Aharon, S. Gamliel, B. El Cohen, and L. Etgar, Depletion region effect of highly efficient hole conductor free CH₃NH₃PbI₃ perovskite solar cells, Phys. Chem. Chem. Phys., 16(2014), No. 22, p. 10512. doi: 10.1039/C4CP00460D
[21]	Y.T. Fang, S.B. Zhai, L. Chu, and J.S. Zhong, Advances in halide perovskite memristor from lead-based to lead-free materials, ACS Appl. Mater. Interfaces, 13(2021), No. 15, p. 17141. doi: 10.1021/acsami.1c03433
[22]	K. Domanski, J.P. Correa-Baena, N. Mine, M.K. Nazeeruddin, A. Abate, M. Saliba, W. Tress, A. Hagfeldt, and M. Grätzel, Not all that glitters is gold: Metal-migration-induced degradation in perovskite solar cells, ACS Nano, 10(2016), No. 6, p. 6306. doi: 10.1021/acsnano.6b02613
[23]	A.Y. Mei, X. Li, L.F. Liu, Z.L. Ku, T.F. Liu, Y.G. Rong, M. Xu, M. Hu, J.Z. Chen, Y. Yang, M. Grätzel, and H.W. Han, A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability, Science, 345(2014), No. 6194, p. 295. doi: 10.1126/science.1254763
[24]	H. Hu, B.H. Dong, H.T. Hu, F.X. Chen, M.Q. Kong, Q.P. Zhang, T.Y. Luo, L. Zhao, Z.G. Guo, J. Li, Z.X. Xu, S.M. Wang, D. Eder, and L. Wan, Atomic layer deposition of TiO₂ for a high-efficiency hole-blocking layer in hole-conductor-free perovskite solar cells processed in ambient air, ACS Appl. Mater. Interfaces, 8(2016), No. 28, p. 17999. doi: 10.1021/acsami.6b02701
[25]	L. Chu, W. Liu, Z.F. Qin, R. Zhang, R.Y. Hu, J. Yang, J.P. Yang, and X.A. Li, Boosting efficiency of hole conductor-free perovskite solar cells by incorporating p-type NiO nanoparticles into carbon electrodes, Sol. Energy Mater. Sol. Cells, 178(2018), p. 164. doi: 10.1016/j.solmat.2018.01.010
[26]	J.Y. Du, M.Q. Zhang, and J.J. Tian, Controlled crystal orientation of two-dimensional Ruddlesden-Popper halide perovskite films for solar cells, Int. J. Miner. Metall. Mater., 29(2022), No. 1, p. 49. doi: 10.1007/s12613-021-2341-z
[27]	H.Y. Zhang, R. Li, W.W. Liu, M. Zhang, and M. Guo, Research progress in lead-less or lead-free three-dimensional perovskite absorber materials for solar cells, Int. J. Miner. Metall. Mater., 26(2019), No. 4, p. 387. doi: 10.1007/s12613-019-1748-2
[28]	J.H. Lee, I.C. Leu, M.C. Hsu, Y.W. Chung, and M.H. Hon, Fabrication of aligned TiO₂ one-dimensional nanostructured arrays using a one-step templating solution approach, J. Phys. Chem. B, 109(2005), No. 27, p. 13056. doi: 10.1021/jp052203l
[29]	C.K. Xu, J.M. Wu, U.V. Desai, and D. Gao, High-efficiency solid-state dye-sensitized solar cells based on TiO₂-coated ZnO nanowire arrays, Nano Lett., 12(2012), No. 5, p. 2420. doi: 10.1021/nl3004144
[30]	B. Erdem, R.A. Hunsicker, G.W. Simmons, E.D. Sudol, V.L. Dimonie, and M.S. El-Aasser, XPS and FTIR surface characterization of TiO₂ particles used in polymer encapsulation, Langmuir, 17(2001), No. 9, p. 2664. doi: 10.1021/la0015213
[31]	A. Orendorz, J. Wüsten, C. Ziegler, and H. Gnaser, Photoelectron spectroscopy of nanocrystalline anatase TiO₂ films, Appl. Surf. Sci., 252(2005), No. 1, p. 85. doi: 10.1016/j.apsusc.2005.02.002
[32]	E. McCafferty and J.P. Wightman, Determination of the concentration of surface hydroxyl groups on metal oxide films by a quantitative XPS method, Surf. Interface Anal., 26(1998), No. 8, p. 549. doi: 10.1002/(SICI)1096-9918(199807)26:8<549::AID-SIA396>3.0.CO;2-Q
[33]	K. Cao, Z.X. Zuo, J. Cui, Y. Shen, T. Moehl, S.M. Zakeeruddin, M. Grätzel, and M.K. Wang, Efficient screen printed perovskite solar cells based on mesoscopic TiO₂/Al₂O₃/NiO/carbon architecture, Nano Energy, 17(2015), p. 171. doi: 10.1016/j.nanoen.2015.08.009
[34]	N.J. Liu, L. Chu, W. Ahmad, R.Y. Hu, R.F. Luan, W. Liu, J. Yang, Y.H. Ma, and X.A. Li, Low-pressure treatment of CuSCN hole transport layers for enhanced carbon-based perovskite solar cells, J. Power Sources, 499(2021), art. No. 229970. doi: 10.1016/j.jpowsour.2021.229970
[35]	Y.Z. Wu, X.D. Yang, H. Chen, K. Zhang, C.J. Qin, J. Liu, W.Q. Peng, A. Islam, E.B. Bi, F. Ye, M.S. Yin, P. Zhang, and L.Y. Han, Highly TiO2 compact films for efficient hole-blocking in perovskite solar cells, Appl. Phys. Express, 7(2014), No. 5, art. No. 052301. doi: 10.7567/APEX.7.052301
[36]	P.J. Wang, Z.P. Shao, M. Ulfa, and T. Pauporté, Insights into the hole blocking layer effect on the perovskite solar cell performance and impedance response, J. Phys. Chem. C, 121(2017), No. 17, p. 9131. doi: 10.1021/acs.jpcc.7b00979