铝替代对合成的Mg<sub>2</sub>Cu纳米颗粒相演变的影响

Elham Mohseni-Sohi; Farshid Kashani Bozorg

doi:10.1007/s12613-021-2368-1

Volume 30 Issue 1

Jan. 2023

Turn off MathJax

图(17)

数据统计

计量

文章访问数: 582
HTML全文浏览量: 210
PDF下载量: 35
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2023 > 30(1): 63-71

Elham Mohseni-Sohiand Farshid Kashani Bozorg, Effect of Al substitution on phase evolution in synthesized Mg₂Cu nanoparticles, Int. J. Miner. Metall. Mater., 30(2023), No. 1, pp. 63-71. https://doi.org/10.1007/s12613-021-2368-1

Cite this article as:

Elham Mohseni-Sohiand Farshid Kashani Bozorg, Effect of Al substitution on phase evolution in synthesized Mg2Cu nanoparticles, Int. J. Miner. Metall. Mater., 30(2023), No. 1, pp. 63-71. https://doi.org/10.1007/s12613-021-2368-1

Citation:

PDF( 2888 KB)

引用本文 PDF XML SpringerLink

研究论文

铝替代对合成的Mg₂Cu纳米颗粒相演变的影响

School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, PO Box 11155/4563, Iran

通讯作者:
Elham Mohseni-Sohi E-mail: elham.mohseni@stud.tu-darmstadt.de

中文摘要

研究了用Al替代Mg对Mg₂Cu粉末混合物的放电能力的影响。通过机械合金化（MA）技术，用高能行星式球磨机制备纳米晶体粉末的混合物。此外，不同摩尔数的Al（0.05, 0.1, 0.15, 0.2和0.3 M）被替换到Mg₂Cu粉末中。利用X射线衍射（XRD）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）分析结构、形态和晶粒大小的变化。获得的粉末用作镍金属氢化物电池（Ni–MH）的阳极。在铝含量为0.05 M的试样中，经过5 h的研磨，出现了Mg₂Cu的正方体结构。结果显示，超过0.1 M的Al替代会导致MgCu₂峰的出现。铝的替代并不影响微观结构的均匀性；然而，它导致晶体尺寸和晶格参数的减少。选区衍射（SAD）图表明具有Mg_1.9Al_0.1Cu化学成分和20 h研磨的电极具有最大的放电容量。

关键词:

Research Article

Effect of Al substitution on phase evolution in synthesized Mg₂Cu nanoparticles

+ Author Affiliations

Abstract

Abstract

The effect of Mg replacement with Al on the discharge capacity of Mg₂Cu powder mixture was investigated. The mixture of nanocrystalline powder was prepared via mechanical alloying (MA) technique with a high energy planetary ball mill. In addition, different moles of Al (0.05, 0.1, 0.15, 0.2, and 0.3 M) were substituted to Mg₂Cu powder. X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze changes in structure, morphology, and grain size. The obtained powder was utilized as an anode in a nickel–metal hydride battery (Ni–MH). In the specimens with 0.05 M Al content, the orthorhombic structure of Mg₂Cu is emerged after 5 h milling. The results reveal that more than 0.1 M Al substitution leads to an appearance of MgCu₂ peaks. Al substitution does not affect microstructure uniformity; however, it causes a decrease in crystalline size and lattice parameters. The selected area diffraction (SAD) pattern elucidates that the electrode with the Mg_1.9Al_0.1Cu chemical composition and 20 h milling has the maximum discharge capacity.
- Mg₂Cu;
- mechanical alloying;
- nanocrystalline;
- discharge capacity

FullText(HTML)

Supplements(0)

References(48)

References

[1]	V.V. Goidin, V.V. Molchanov, and R.A. Buyanov, Mechanochemical synthesis of intermetallic hydrides at elevated hydrogen pressures, Inorg. Mater., 40(2004), No. 11, p. 1165. doi: 10.1023/B:INMA.0000048215.08698.ba
[2]	Y.M. Dergachev, I.G. Gorichev, and N.T. Kuznetsov, Kinetics of aluminum hydride thermal decomposition, Inorg. Mater., 36(2000), No. 5, p. 458. doi: 10.1007/BF02758047
[3]	J.Z. Song, Z.Y. Zhao, X. Zhao, R.D. Fu, and S.M. Han, Hydrogen storage properties of MgH₂ co-catalyzed by LaH₃ and NbH, Int. J. Miner. Metall. Mater., 24(2017), No. 10, p. 1183. doi: 10.1007/s12613-017-1509-z
[4]	S.R. Ovshinsky, M.A. Fetcenko, and J. Ross, A nickel metal hydride battery for electric vehicles, Science, 260(1993), No. 5105, p. 176. doi: 10.1126/science.260.5105.176
[5]	W.L. Mi, Z.S. Liu, T. Kimura, A. Kamegawa, and H.L. Wang, Crystal structure and hydrogen storage properties of (La, Ce)Ni_5−xM_x (M = Al, Fe, or Co) alloys, Int. J. Miner. Metall. Mater., 26(2019), No. 1, p. 108. doi: 10.1007/s12613-019-1714-z
[6]	A. Taniguchi, N. Fujioka, M. Ikoma, and A. Ohta, Development of nickel/metal-hydride batteries for EVs and HEVs, J. Power Sources, 100(2001), No. 1-2, p. 117. doi: 10.1016/S0378-7753(01)00889-8
[7]	T. Ozaki, M. Kanemoto, T. Kakeya, Y. Kitano, M. Kuzuhara, M. Watada, S. Tanase, and T. Sakai, Stacking structures and electrode performances of rare earth-Mg-Ni-based alloys for advanced nickel-metal hydride battery, J. Alloys Compd., 446-447(2007), p. 620. doi: 10.1016/j.jallcom.2007.03.059
[8]	Y. Li, Y. Tao, and Q. Huo, Effect of stoichiometry and Cu-substitution on the phase structure and hydrogen storage properties of Ml-Mg-Ni-based alloys, Int. J. Miner. Metall. Mater., 22(2015), No. 1, p. 86. doi: 10.1007/s12613-015-1047-5
[9]	N.N. Yazvinskaya, N.E. Galushkin, D.N. Galushkin, and I.A. Galushkina, Analysis of thermal runaway aftereffects in nickel-cadmium batteries, Int. J. Electrochem. Sci., 11(2016), No. 12, p. 10287. doi: 10.20964/2016.12.44
[10]	N.N. Yazvinskaya, N.E. Galushkin, D.N. Galushkin, and I.A. Galushkina, Hydrogen amount estimation in electrodes of nickel-cadmium batteries depending on their operating life, Int. J. Electrochem. Sci., 11(2016), p. 7843. doi: 10.20964/2016.09.49
[11]	Z.T. Dong, Y. Li, K.L. Ren, S.Q. Yang, Y.M. Zhao, Y.J. Yuan, L. Zhang, and S.M. Han, Enhanced electrochemical properties of LaFeO₃ with Ni modification for MH-Ni batteries, Int. J. Miner. Metall. Mater., 25(2018), No. 10, p. 1201. doi: 10.1007/s12613-018-1672-x
[12]	T. Tojo, I. Yamamoto, Q.W. Zhang, and F. Saito, Discharge properties of Mg₂Ni-Ni alloy synthesized by mechanical alloying, Adv. Powder Technol., 16(2005), No. 6, p. 649. doi: 10.1163/156855205774483299
[13]	A. Gasiorowski, W. Iwasieczko, D. Skoryna, H. Drulis, and M. Jurczyk, Hydriding properties of nanocrystalline Mg_2−xM_xNi alloys synthesized by mechanical alloying (M=Mn, Al), J. Alloys Compd., 364(2004), No. 1-2, p. 283. doi: 10.1016/S0925-8388(03)00544-9
[14]	A. Szajek, M. Jurczyk, I. Okońska, K. Smardz, E. Jankowska, and L. Smardz, Electrochemical and electronic properties of nanocrystalline Mg-based hydrogen storage materials, J. Alloys Compd., 436(2007), No. 1-2, p. 345. doi: 10.1016/j.jallcom.2006.07.043
[15]	K. Tanaka, N. Takeichi, H. Tanaka, N. Kuriyama, T. Ueda, M. Tsukahara, H. Miyamura, and S. Kikuchi, TEM investigation of micro/nano-structures and hydrogen storage properties of Mg/Cu super-laminates and Mg₂Cu powder, Microsc. Microanal., 13(2007), No. S02, p. 1098. doi: 10.1017/S1431927607073175
[16]	X. Yao, S.D. McDonald, A.K. Dahle, C.J. Davidson, and D.H. StJohn, Modeling of grain refinement: Part III. Al−7Si−0.3Mg aluminum alloy, J. Mater. Res., 23(2008), No. 5, p. 1301. doi: 10.1557/JMR.2008.0155
[17]	L.S. Volkova, G.V. Kalinnikov, A.V. Ivanov, and S.P. Shilkin, Synthesis of Mg₂Cu and MgCu₂ nanoparticles In a KCl−NaCl−MgCl₂ melt, Inorg. Mater., 48(2012), No. 11, p. 1078. doi: 10.1134/S0020168512110179
[18]	V.N. Fokin, P.V. Fursikov, E.E. Fokina, and B.P. Tarasov, Hydrogenation of eutectic alloy in the Mg–Al system, Inorg. Mater., 57(2021), No. 3, p. 234. doi: 10.1134/S0020168521030043
[19]	M. Anik, F. Karanfil, and N. Küçükdeveci, Development of the high performance magnesium based hydrogen storage alloy, Int. J. Hydrogen Energy, 37(2012), No. 1, p. 299. doi: 10.1016/j.ijhydene.2011.09.057
[20]	N. Cui, B. Luan, H.K. Liu, H.J. Zhao, and S.X. Dou, Characteristics of magnesium-based hydrogen-storage alloy electrodes, J. Power Sources, 55(1995), No. 2, p. 263. doi: 10.1016/0378-7753(95)02195-M
[21]	N. Cui, P. He, and J.L. Luo, Magnesium-based hydrogen storage materials modified by mechanical alloying, Acta Mater., 47(1999), No. 14, p. 3737. doi: 10.1016/S1359-6454(99)00249-9
[22]	J.J. Reilly and R.H. Wiswall, Reaction of hydrogen with alloys of magnesium and copper, Inorg. Chem., 6(1967), No. 12, p. 2220. doi: 10.1021/ic50058a020
[23]	M. Jurczyk, L. Smardz, and A. Szajek, Nanocrystalline materials for Ni-MH batteries, Mater. Sci. Eng. B, 108(2004), No. 1-2, p. 67. doi: 10.1016/j.mseb.2003.10.050
[24]	P. Novák, D. Vojtěch, F. Průša, J. Šerák, and T. Fabián, Structure and properties of magnesium-based hydrogen storage alloys, Mater. Sci. Forum, 567-568(2007), p. 217. doi: 10.4028/www.scientific.net/MSF.567-568.217
[25]	L. Lu and Y.F. Zhang, Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying, J. Alloys Compd., 290(1999), No. 1-2, p. 279. doi: 10.1016/S0925-8388(99)00221-2
[26]	M. Jurczyk, L. Smardz, I. Okonska, E. Jankowska, M. Nowak, and K. Smardz, Nanoscale Mg-based materials for hydrogen storage, Int. J. Hydrogen Energy, 33(2008), No. 1, p. 374. doi: 10.1016/j.ijhydene.2007.07.022
[27]	X.D. Yao and G.Q. Lu, Magnesium-based materials for hydrogen storage: Recent advances and future perspectives, Chin. Sci. Bull., 53(2008), No. 16, p. 2421. doi: 10.1007/s11434-008-0325-2
[28]	M. Jurczyk, I. Okonska, W. Iwasieczko, E. Jankowska, and H. Drulis, Thermodynamic and electrochemical properties of nanocrystalline Mg₂Cu-type hydrogen storage materials, J. Alloys Compd., 429(2007), No. 1-2, p. 316. doi: 10.1016/j.jallcom.2006.04.024
[29]	G. Mulas, M. Varga, I. Bertóti, Á. Molnár, G. Cocco, and J. Szépvölgyi, Cu₄₀Mg₆₀ and Cu-MgO powders prepared by ball-milling: Characterization and catalytic tests, Mater. Sci. Eng., A, 267(1999), No. 2, p. 193. doi: 10.1016/S0921-5093(99)00091-X
[30]	G. Mulas, S. Deledda, and G. Cocco, The mechanochemical conversion of acetone to methyl isobutyl ketone over Cu-Mg based substrates, Mater. Sci. Eng., A, 267(1999), No. 2, p. 214. doi: 10.1016/S0921-5093(99)00094-5
[31]	Z. Ma, Y. Liu, L. Yu, and Q. Cai, Investigation of phase composition and nanoscale microstructure of high-energy ball-milled MgCu sample, Nanoscale Res. Lett., 7(2012), No. 1, p. 390. doi: 10.1186/1556-276X-7-390
[32]	R. Wiswall, Hydrogen storage in metals., [in] G. Alefeld and J. Völkl, eds., Hydrogen in Metals II. Topics in Applied Physics, Springer-Verlag Berlin, Heidelberg, 1978, p. 201.
[33]	S. Rousselot, M.P. Bichat, D. Guay, and L. Roué, Structure and electrochemical hydrogen storage properties of mg-ti based materials prepared by mechanical alloying, ECS Trans., 16(2019), No. 42, p. 91. doi: 10.1149/1.3112733
[34]	L.Z. Ouyang, T.H. Yang, M. Zhu, D. Min, T.Z. Luo, H. Wang, F.M. Xiao, and R.H. Tang, Hydrogen storage and electrochemical properties of Pr, Nd and Co-free La_13.9Sm_24.7Mg_1.5Ni₅₈Al_1.7Zr_0.14Ag_0.07 alloy as a nickel-metal hydride battery electrode, J. Alloys Compd., 735(2018), p. 98. doi: 10.1016/j.jallcom.2017.10.268
[35]	S. Bliznakov, E. Lefterova, N. Dimitrov, K. Petrov, and A. Popov, A study of the Al content impact on the properties of MmNi_4.4−xCo_0.6Al_x alloys as precursors for negative electrodes in NiMH batteries, J. Power Sources, 176(2008), No. 1, p. 381. doi: 10.1016/j.jpowsour.2007.10.028
[36]	E.C. Souza, and E.A. Ticianelli, On the properties of LaNi₅-type metal hydride alloys, J. Brazalian Chem. Soc., 14(2003), p. 544. doi: 10.1590/S0103-50532003000400009
[37]	R.C. Zeng, Z.G. Liu, F. Zhang, S.Q. Li, Q.K. He, H.Z. Cui, and E.H. Han, Corrosion resistance of in situ Mg−Al hydrotalcite conversion film on AZ31 magnesium alloy by one-step formation, Trans. Nonferrous Met. Soc. China, 25(2015), No. 6, p. 1917. doi: 10.1016/S1003-6326(15)63799-2
[38]	A. Wagih, Effect of Mg addition on mechanical and thermoelectrical properties of Al-Al₂O₃ nanocomposite, Trans. Nonferrous Met. Soc. China, 26(2016), No. 11, p. 2810. doi: 10.1016/S1003-6326(16)64409-6
[39]	N. Mani and S. Ramaprabhu, Effect of substitutional elements on hydrogen absorption properties in Mm-based AB₅ alloys, J. Alloys Compd., 363(2004), No. 1-2, p. 275. doi: 10.1016/S0925-8388(03)00487-0
[40]	T. Sakai, H. Miyamura, N. Kuriyama, A. Kato, K. Oguro, H. Ishikawa, and C. Iwakura, The influence of small amounts of added elements on various anode performance characteristics for LaNi_2.5Co_2.5-based alloys, J. Less Common Met., 159(1990), p. 127. doi: 10.1016/0022-5088(90)90140-F
[41]	D. Shin and Z.K. Liu, Enthalpy of mixing for ternary fcc solid solutions from special quasirandom structures, Calphad, 32(2008), No. 1, p. 74. doi: 10.1016/j.calphad.2007.09.002
[42]	M.X. Tanaka, N. Takeichi, H.T. Takeshita, and T. Kiyobayashi, Effect of ball-milling on the properties of Mg₂Cu hydrogen storage alloy, Mater. Trans., 49(2008), No. 11, p. 2698. doi: 10.2320/matertrans.MRA2008183
[43]	Z.Q. Ma, Y.C. Liu, L.M. Yu, and Q. Cai, Correction: Investigation of phase composition and nanoscale microstructure of high-energy ball-milled MgCu sample, Nanoscale Res. Lett., 8(2013), No. 1, p. 186. doi: 10.1186/1556-276X-8-186
[44]	J. Gilbert Kaufman, Introduction to Aluminium Alloys and Tempers, ASM International, 2000.
[45]	C.C. Koch, The synthesis and structure of nanocrystalline materials produced by mechanical attrition: A review, Nanostruct. Mater., 2(1993), No. 2, p. 109. doi: 10.1016/0965-9773(93)90016-5
[46]	M. Mohri and S.F. Kashani Bozorg, An electrochemical investigation of nanocrystalline Mg₂Ni_0.75Nb_0.25 compound synthesized by mechanical alloying, Int. J. Mod. Phys. B, 22(2008), No. 18n19, p. 2939. doi: 10.1142/S021797920804778X
[47]	J. Chen, P. Yao, D.H. Bradhurst, S.X. Dou, and H.K. Liu, Mg₂Ni-based hydrogen storage alloys for metal hydride electrodes, J. Alloys Compd., 293-295(1999), p. 675. doi: 10.1016/S0925-8388(99)00429-6
[48]	R. Abbasi and S.F. Kashani-Bozorg, Electrochemical and kinetic performance of amorphous/nanostructured TiNi-based intermetallic compound with Nb substitution synthesized by mechanical alloying, J. Mater. Res., 33(2018), No. 22, p. 3774. doi: 10.1557/jmr.2018.231

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

铝替代对合成的Mg₂Cu纳米颗粒相演变的影响

中文摘要

Effect of Al substitution on phase evolution in synthesized Mg₂Cu nanoparticles

Abstract

References

数据统计

Catalog

留言板

数据统计

分享

计量

铝替代对合成的Mg2Cu纳米颗粒相演变的影响

中文摘要

Effect of Al substitution on phase evolution in synthesized Mg2Cu nanoparticles

Abstract

References

数据统计

Catalog

铝替代对合成的Mg₂Cu纳米颗粒相演变的影响

Effect of Al substitution on phase evolution in synthesized Mg₂Cu nanoparticles