TiO2和TiN夹杂物在CaO–SiO2–B2O3基无氟保护渣中的溶解行为

蔡大为; 张力; 王万林; 张磊; Il Sohn

doi:10.1007/s12613-023-2622-9

Volume 30 Issue 9

Sep. 2023

Turn off MathJax

图(9) / 表(1)

数据统计

计量

文章访问数: 635
HTML全文浏览量: 194
PDF下载量: 58
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2023 > 30(9): 1740-1747

Dawei Cai, Li Zhang, Wanlin Wang, Lei Zhang, and Il Sohn, Dissolution of TiO₂ and TiN inclusions in CaO–SiO₂–B₂O₃-based fluorine-free mold flux, Int. J. Miner. Metall. Mater., 30(2023), No. 9, pp. 1740-1747. https://doi.org/10.1007/s12613-023-2622-9

Cite this article as:

Dawei Cai, Li Zhang, Wanlin Wang, Lei Zhang, and Il Sohn, Dissolution of TiO2 and TiN inclusions in CaO–SiO2–B2O3-based fluorine-free mold flux, Int. J. Miner. Metall. Mater., 30(2023), No. 9, pp. 1740-1747. https://doi.org/10.1007/s12613-023-2622-9

Citation:

PDF( 20025 KB)

引用本文 PDF XML SpringerLink

研究论文

TiO₂和TiN夹杂物在CaO–SiO₂–B₂O₃基无氟保护渣中的溶解行为

1)
中南大学冶金与环境学院, 长沙 410083, 中国
2)
中南大学清洁冶金国际联合研究中心, 长沙 410083, 中国
3)
Materials Science and Engineering Department, Yonsei University, Seoul 120-749, Rep. of Korea

* 共同第一作者

通讯作者:
张磊 E-mail: truth.zhang009@gmail.com

文章亮点

(1) 在线原位研究了含钛夹杂物在高温熔渣中的动态溶解过程。

(2) 从夹杂物溶解过程微观结构转变的角度剖析了含钛夹杂物的溶解机理。

(3) 对比分析了TiO₂和TiN两种典型含钛钢夹杂物溶解行为和机理的差异。

中文摘要

保护渣作为钢铁连铸的冶金辅料，发挥着吸收夹杂物等重要冶金功能，直接影响了连铸的顺利进行和铸坯的质量。本文利用原位的单丝热电偶技术和X射线光电子能谱技术研究了TiO₂和TiN夹杂物在熔融CaO–SiO₂–B₂O₃基无氟保护渣中的溶解行为和机理。研究结果表明TiO₂夹杂物能够在76 s内有效地被熔渣溶解；在这过程中，TiO₂夹杂物中的[TiO₆]^8-八面体结构会被破坏、并转化成[TiO₄]^4-四面体结构。然而TiN夹杂物的溶解效率远远低于TiO₂的溶解效率。这是因为TiN颗粒需要先被氧化才能被缓慢溶解到熔渣中、转化成[TiO₆]^8-八面体和[TiO₄]^4-四面体结构，并且这反应伴随着大量的氮气生成。另外，在熔体中含有充足的[TiO₆]^8-八面体和Ca²⁺的情况下，高熔点的CaTiO₃晶体容易在氮气气泡表面形核、生长，导致熔渣最终成固液混熔的状态。

关键词:

Research Article

Dissolution of TiO₂ and TiN inclusions in CaO–SiO₂–B₂O₃-based fluorine-free mold flux

+ Author Affiliations

Abstract

Abstract

Mold flux serves the crucial metallurgical function of absorbing inclusions, directly impacting the smoothness of the casting process as well as the cast slab quality. In this study, the dissolution behavior and mechanism of TiO₂ and TiN inclusions in molten CaO–SiO₂–B₂O₃-based fluorine-free mold flux were explored by in situ single hot thermocouple technology combined with X-ray photoelectron spectroscopy. The results showed that TiO₂ inclusions are effectively dissolved by the molten slag within 76 s, during which the original octahedral [TiO₆]⁸⁻ structures are destroyed and convert to the networker tetrahedral [TiO₄]⁴⁻ structures. However, the dissolution rate is much lower for TiN inclusions than for TiO₂ inclusions. This can be attributed to the fact that the TiN particles need to be oxidized and then dissolved in the molten slag to form tetrahedral [TiO₄]⁴⁻ and octahedral [TiO₆]⁸⁻ structures during the TiN inclusion dissolution process, which is accompanied by the generation of a large amount of N₂ gas. Moreover, CaTiO₃ crystals tend to nucleate and grow on bubble surfaces with sufficient octahedral [TiO₆]⁸⁻ structures and Ca²⁺ ions, eventually resulting in the molten slag being in a solid–liquid mixed state.
- TiO₂ inclusion;
- TiN inclusion;
- mold flux;
- fluorine-free;
- continuous casting

FullText(HTML)

Supplements(0)

References(47)

References

[1]	H.W. Yen, C.Y. Chen, T.Y. Wang, C.Y. Huang, and J.R. Yang, Orientation relationship transition of nanometre sized interphase precipitated TiC carbides in Ti bearing steel, Mater. Sci. Technol., 26(2010), No. 4, p. 421. doi: 10.1179/026708309X12512744154207
[2]	L.D. Xing, J.L. Guo, X. Li, et al., Control of TiN precipitation behavior in titanium-containing micro-alloyed steel, Mater. Today Commun., 25(2020), art. No. 101292. doi: 10.1016/j.mtcomm.2020.101292
[3]	Y.F. Shen, C.M. Wang, and X. Sun, A micro-alloyed ferritic steel strengthened by nanoscale precipitates, Mater. Sci. Eng. A, 528(2011), No. 28, p. 8150. doi: 10.1016/j.msea.2011.07.065
[4]	Z. Chen, M. Li, X.F. Wang, S.P. He, and Q. Wang, Mechanism of floater formation in the mold during continuous casting of Ti-stabilized austenitic stainless steels, Metals, 9(2019), No. 6, art. No. 635. doi: 10.3390/met9060635
[5]	T.F. Zhao, X. Zheng, D.J. Huang, Z.H. Zhu, and Z.H. Yin, Thermodynamic research on the precipitation of Ti₂O₃, TiN and TiC in continuous casting of titanium microalloyed steel, J. Phys.: Conf. Ser., 2076(2021), No. 1, art. No. 012077. doi: 10.1088/1742-6596/2076/1/012077
[6]	J.Y. Li, G.G. Cheng, Q. Ruan, J.X. Pan, and X.R. Chen, Characteristics of nozzle clogging and evolution of oxide inclusion for Al-killed Ti-stabilized 18Cr stainless steel, Metall. Mater. Trans. B, 50(2019), No. 6, p. 2769. doi: 10.1007/s11663-019-01708-8
[7]	L.M. Cheng, L.F. Zhang, Y. Ren, and W. Yang, Clogging behavior of a submerged entry nozzle for the casting of Ca-treated Al-killed Ti-bearing steel, Metall. Mater. Trans. B, 52(2021), No. 3, p. 1186. doi: 10.1007/s11663-021-02110-z
[8]	H. Cui, Y.P. Bao, M. Wang, and W.S. Wu, Clogging behavior of submerged entry nozzles for Ti-bearing IF steel, Int. J. Miner. Metall. Mater., 17(2010), No. 2, p. 154. doi: 10.1007/s12613-010-0206-y
[9]	S. Basu, S.K. Choudhary, and N.U. Girase, Nozzle clogging behaviour of Ti-bearing Al-killed ultra low carbon steel, ISIJ Int., 44(2004), No. 10, p. 1653. doi: 10.2355/isijinternational.44.1653
[10]	L.J. Zhou, Z.H. Pan, W.L. Wang, et al., Interfacial interactions between inclusions comprising TiO₂ or TiN and the mold flux during the casting of titanium-stabilized stainless steel, Metall. Mater. Trans. B, 51(2020), No. 1, p. 85. doi: 10.1007/s11663-019-01746-2
[11]	Z.H. Pan, L.J. Zhou, and W.L. Wang, Study on the interaction process between mold flux and TiN/TiO₂ by sessile drop method, [in] TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series, Springer, Cham., 2020, p. 67.
[12]	W.L. Wang, D.X. Cai, L. Zhang, and I. Sohn, Effect of TiO₂ and TiN on the viscosity, fluidity, and crystallization of fluorine-free mold fluxes for casting Ti-bearing steels, Steel Res. Int., 92(2021), No. 2, art. No. 2000314. doi: 10.1002/srin.202000314
[13]	K.C. Mills, A.B. Fox, Z. Li, and R.P. Thackray, Performance and properties of mould fluxes, Ironmaking Steelmaking, 32(2005), No. 1, p. 26. doi: 10.1179/174328105X15788
[14]	W.L. Wang, D.X. Cai, and L. Zhang, A review of fluorine-free mold flux development, ISIJ Int., 58(2018), No. 11, p. 1957. doi: 10.2355/isijinternational.ISIJINT-2018-232
[15]	B. Ozturk, Solubility of TiN in continuous casting powders, Metall. Trans. B, 23(1992), No. 4, p. 523. doi: 10.1007/BF02649671
[16]	E.B. Pretorius and R.C. Nunnington, Stainless steel slag fundamentals: From furnace to tundish, Ironmaking Steelmaking, 29(2002), No. 2, p. 133. doi: 10.1179/030192302225003495
[17]	Z.S. Ren, X.J. Hu, X.M. Hou, X.X. Xue, and K.C. Chou, Dissolution and diffusion of TiO₂ in the CaO–Al₂O₃–SiO₂ slag, Int. J. Miner. Metall. Mater., 21(2014), No. 4, p. 345. doi: 10.1007/s12613-014-0915-8
[18]	H. Park, J.Y. Park, G.H. Kim, and I. Sohn, Effect of TiO₂ on the viscosity and slag structure in blast furnace type slags, Steel Res. Int., 83(2012), No. 2, p. 150. doi: 10.1002/srin.201100249
[19]	L.F. Sun, H.P. Wang, M.F. Jiang, Q.Z. Lin, C.L. Liu, and Y. Zou, Effects of TiO₂ on the viscocity and solidification temperature of mold fluxes for the stainless steel, Adv. Mater. Res., 189-193(2011), p. 107. doi: 10.4028/www.scientific.net/AMR.189-193.107
[20]	R.C. Nunnington and N. Sutcliffe, The steelmaking and casting of Ti stabilized stainless steels, [in] 59th Electric Furnace Conference and 19th Process Technology Conference, Arizona, 2001, p. 361.
[21]	M. Hasegawa, S. Maruhashi, Y. Muranaka, and F. Hoshi, Mechanism of formation of surface defects in continuously cast stainless steel slabs containing titanium, Tetsu-to-Hagane, 73(1987), No. 3, p. 505. doi: 10.2355/tetsutohagane1955.73.3_505
[22]	B.Y. Li, X. Geng, Z.H. Jiang, Y. Hou, and W. Gong, Effects of BaO and B₂O₃ on the absorption of Ti inclusions for high titanium steel, Metals, 11(2021), No. 1, art. No. 165. doi: 10.3390/met11010165
[23]	Z.S. Bi, K.J. Li, C.H. Jiang, et al., Effects of B₂O₃ on the structure and properties of blast furnace slag by molecular dynamics simulation, J. Non-Cryst. Solids, 551(2021), art. No. 120412. doi: 10.1016/j.jnoncrysol.2020.120412
[24]	F.F. Lai, W. Yao, and J.L. Li, Effect of B₂O₃ on structure of CaO–Al₂O₃–SiO₂–TiO₂–B₂O₃ glassy systems, ISIJ Int., 60(2020), No. 8, p. 1596. doi: 10.2355/isijinternational.ISIJINT-2019-679
[25]	L.T. Bian and Y.H. Gao, Influence of B₂O₃ and basicity on viscosity and structure of medium titanium bearing blast furnace slag, J. Chem., 2016(2016), art. No. 6754593
[26]	Y.Q. Sun, J.L. Liao, K. Zheng, X.D. Wang, and Z.T. Zhang, Effect of B₂O₃ on the structure and viscous behavior of Ti-bearing blast furnace slags, JOM, 66(2014), No. 10, p. 2168. doi: 10.1007/s11837-014-1087-8
[27]	L. Zhang and W.L. Wang, Growth mechanism and structure evolution during nucleation of calcium borosilicate crystal in CaO–SiO₂–B₂O₃ based fluorine-free mold flux, ISIJ Int., 59(2019), No. 6, p. 1041. doi: 10.2355/isijinternational.ISIJINT-2018-560
[28]	L. Zhang, W.L. Wang, and I. Sohn, Crystallization behavior and structure analysis for molten CaO–SiO₂–B₂O₃ based fluorine-free mold fluxes, J. Non-Cryst. Solids, 511(2019), p. 41. doi: 10.1016/j.jnoncrysol.2019.01.035
[29]	L. Zhang, W.L. Wang, B.Y. Zhai, and I. Sohn, The evolution of the mold flux melt structure during the process of fluorine replacement by B₂O₃, J. Am. Ceram. Soc., 103(2020), No. 1, p. 112. doi: 10.1111/jace.16714
[30]	J.J. Zhang, B.Y. Zhai, L. Zhang, and W.L. Wang, A comparison study on interfacial properties of fluorine-bearing and fluorine-free mold flux for casting advanced high-strength steels, J. Iron Steel Res. Int., 29(2022), No. 10, p. 1613. doi: 10.1007/s42243-021-00714-y
[31]	T.M. Yeo, J.W. Cho, M. Alloni, S. Casagrande, and R. Carli, Structure and its effect on viscosity of fluorine-free mold flux: Substituting CaF₂ with B₂O₃ and Na₂O, J. Non-Cryst. Solids, 529(2020), art. No. 119756. doi: 10.1016/j.jnoncrysol.2019.119756
[32]	The Materials Project. Materials Data Materials Project for TiO₂ (mp-2657) from Database Version v2021 [2022-10-28]. https://doi.org/10.17188/1184648
[33]	The Materials Project. Materials Data Materials Project for TiN (mp-492) from Database Version v2021 [2022-10-28]. https://doi.org/10.17188/1208488
[34]	X. Wu, S.X. Zhao, L. Wei, E.L. Zhao, J.W. Li, and C.W. Nan, Improved structural reversibility and cycling stability of Li₂MnSiO₄ cathode material by the pillar effect of [TiO_x] polyanions, ChemistrySelect, 3(2018), No. 15, p. 4047. doi: 10.1002/slct.201800036
[35]	S.Q. Jin, Z.D. Wang, G.J. Tao, et al., UV resonance Raman spectroscopic insight into titanium species and structure-performance relationship in boron-free Ti-MWW zeolite, J. Catal., 353(2017), p. 305. doi: 10.1016/j.jcat.2017.07.032
[36]	Z. Wang, Q.F. Shu, and K. Chou, Structure of CaO–B₂O₃–SiO₂–TiO₂ glasses: A Raman spectral study, ISIJ Int., 51(2011), No. 7, p. 1021. doi: 10.2355/isijinternational.51.1021
[37]	Z. Wang, Q.F. Shu, and K. Chou, Study on structure characteristics of B₂O₃ and TiO₂-bearing F-free mold flux by Raman spectroscopy, High Temp. Mater. Processes, 32(2013), No. 3, p. 265. doi: 10.1515/htmp-2012-0137
[38]	X.H. Zhang, Z. Du, H.T. Wu, and Y.L. Yue, Effect of TiO₂ on structure and dielectric properties of RO–Al₂O₃–B₂O₃–SiO₂ (R = Ca, Mg) glasses, Surf. Rev. Lett., 20(2013), No. 03n04, art. No. 1350030. doi: 10.1142/S0218625X13500303
[39]	E. Kleebusch, C. Patzig, T. Hoeche, and C. Russel, The evidence of phase separation droplets in the crystallization process of a Li₂O–Al₂O₃–SiO₂ glass with TiO₂ as nucleating agent – An X-ray diffraction and (S)TEM-study supported by EDX-analysis, Ceram. Int., 44(2018), No. 3, p. 2919. doi: 10.1016/j.ceramint.2017.11.040
[40]	G.S. Back, M.J. Yoon, and W.G. Jung, Effect of the Cr₂O₃ and TiO₂ as nucleating agents in SiO₂–Al₂O₃–CaO–MgO glass-ceramic system, Met. Mater. Int., 23(2017), No. 4, p. 798. doi: 10.1007/s12540-017-6714-9
[41]	Q. Wang, Y.J. Lu, S.P. He, K.C. Mills, and Z.S. Li, Formation of TiN and Ti(C,N) in TiO₂ containing, fluoride free, mould fluxes at high temperature, Ironmaking Steelmaking, 38(2011), No. 4, p. 297. doi: 10.1179/1743281210Y.0000000007
[42]	Y.H. Hua and B.J. Zhao, Phase equilibria in the system Al₂O₃–MnO–SiO₂: Thermodynamic and application, [in] 11th International Symposium on High-Temperature Metallurgical Processing, California, 2020, p. 183.
[43]	M. Wittmer, J. Noser, and H. Melchior, Oxidation kinetics of TiN thin films, J. Appl. Phys., 52(1981), No. 11, p. 6659. doi: 10.1063/1.328659
[44]	K. Kusabiraki, Infrared spectra of vitreous silica and sodium silicates containing titanium, J. Non-Cryst. Solids, 79(1986), No. 1-2, p. 208. doi: 10.1016/0022-3093(86)90048-7
[45]	D. Yang, H.H. Zhou, J. Wang, et al., Influence of TiO₂ on viscosity, phase composition and structure of chromium-containing high-titanium blast furnace slag, J. Mater. Res. Technol., 12(2021), p. 1615. doi: 10.1016/j.jmrt.2021.03.069
[46]	K. Yan and D.F. Che, A coupled model for simulation of the gas–liquid two-phase flow with complex flow patterns, Int. J. Multiphase Flow, 36(2010), No. 4, p. 333. doi: 10.1016/j.ijmultiphaseflow.2009.11.007
[47]	S.P. Gu, G.H. Wen, Z.Q. Ding, J.L. Guo, P. Tang, and Q. Liu, Effect of bubbles on crystallization behavior of CaO–SiO₂ based slags, Metals, 9(2019), No. 2, art. No. 193. doi: 10.3390/met9020193