通过铁电极化和缺陷协同增强环境友好型(K0.52Na0.48)NbO3的压电催化性能

周敏; 梁来军; 卢定泽; 吕笑梅; 王政; 黄凤珍; 成鹏飞; 刘冬冬; 田孟琪; 王秋萍; 张云婕

doi:10.1007/s12613-023-2671-0

Volume 30 Issue 10

Oct. 2023

Turn off MathJax

图(8)

数据统计

计量

文章访问数: 441
HTML全文浏览量: 170
PDF下载量: 42
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2023 > 30(10): 2044-2054

Min Zhou, Laijun Liang, Dingze Lu, Xiaomei Lu, Zheng Wang, Fengzhen Huang, Pengfei Cheng, Dongdong Liu, Mengqi Tian, Qiuping Wang, and Yunjie Zhang, Synergically enhanced piezocatalysis performance of eco-friendly (K_0.52Na_0.48)NbO₃ through ferroelectric polarization and defects, Int. J. Miner. Metall. Mater., 30(2023), No. 10, pp. 2044-2054. https://doi.org/10.1007/s12613-023-2671-0

Cite this article as:

Min Zhou, Laijun Liang, Dingze Lu, Xiaomei Lu, Zheng Wang, Fengzhen Huang, Pengfei Cheng, Dongdong Liu, Mengqi Tian, Qiuping Wang, and Yunjie Zhang, Synergically enhanced piezocatalysis performance of eco-friendly (K0.52Na0.48)NbO3 through ferroelectric polarization and defects, Int. J. Miner. Metall. Mater., 30(2023), No. 10, pp. 2044-2054. https://doi.org/10.1007/s12613-023-2671-0

Citation:

PDF( 2669 KB)

引用本文 PDF XML SpringerLink

研究论文

通过铁电极化和缺陷协同增强环境友好型(K_0.52Na_0.48)NbO₃的压电催化性能

1)
西安工程大学理学院, 西安 710048, 中国
2)
南京大学物理学院和固体微结构物理国家重点实验室, 南京 210093, 中国
3)
南京大学先进微结构协同创新中心, 南京 210093, 中国
4)
西安电子科技大学先进材料与纳米技术学院, 西安 710126, 中国
5)
苏州大学纺织与服装工程学院现代丝绸国家工程实验室, 苏州 215213, 中国

通讯作者:
周敏 E-mail: zhmin@xpu.edu.cn

吕笑梅 E-mail: xiaomeil@nju.edu.cn

文章亮点

(1) KNNFC0.015较强的铁电剩余极化起源于适量单价氧空位钉扎效应，可提高电荷分离效率，减少电荷复合。

(2) KNNFC0.015中载流子较低的激活能加速了电子和空穴参与氧化还原反应。

(3) 铁电极化和有益缺陷的协同作用促进了压电催化性能的提高。

中文摘要

压电催化作为一种新兴的催化技术引起了广泛关注。然而，铁电材料本身具有的优异的绝缘特性导致其振动-电转换能力较差。本文报道了FeCo改性(K_0.52Na_0.48)NbO₃铁电陶瓷 (KNNFCx)。适量FeCo (x = 0.015) 取代Nb位，不仅优化了(K_0.52Na_0.48)NbO₃的铁电性，而且产生了有益的缺陷，显著提高了对罗丹明B的降解效率，最高可达95%。在相同功率的超声作用下，KNNFC0.015对罗丹明B的降解效率分别是纯的KNNFC0的4倍以及铁电极化最大的KNNFC1的2倍。研究表明，适量的一价氧空位对铁电畴的钉扎效应导致KNNFC0.015样品可保留优异的铁电剩余极化。这促进了载流子分离，减少载流子复合。重要的是，伴随产生的电子载流子具有较低的激活能，可以很容易地迁移到材料表面并参与氧化还原反应。因此，优异的铁电性和恰当的缺陷在提高压电催化性能方面起着协同作用。

关键词:

Research Article

Synergically enhanced piezocatalysis performance of eco-friendly (K_0.52Na_0.48)NbO₃ through ferroelectric polarization and defects

+ Author Affiliations

1)
School of Science, Xi’an Polytechnic University, Xi’an 710048, China
2)
National Laboratory of Solid State Microstructures and Physics School, Nanjing University, Nanjing 210093, China
3)
Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, China
4)
School of Advanced Materials and Nanotechnology, Xidian University, Xi’an 710126, China
5)
National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
The online version contains supplementary material available at https://doi.org/10.1007/s12613-023-2671-0.

Corresponding authors:
Min Zhou E-mail: zhmin@xpu.edu.cn

Xiaomei Lu E-mail: xiaomeil@nju.edu.cn
Received: 10 February 2023; Revised: 9 May 2023; Accepted: 11 May 2023; Available online: 12 May 2023

Abstract

Abstract

Piezocatalysis has attracted unprecedented research interest as a newly emerging catalysis technology. However, the inherent insulating property of ferroelectric materials ultimately leads to the poor vibration–electricity conversion ability. Herein, this work reports the (K_0.52Na_0.48)NbO₃ ferroelectric ceramics (KNNFCx), for which the FeCo modification strategy is proposed. The substitution of the moderate amount of FeCo (x = 0.015) at Nb site not only optimizes ferroelectricity but also produces beneficial defects, notably increasing Rhodamine B water purification efficiency to 95%. The pinning effect of monovalent oxygen vacancies on ferroelectric domains is responsible for the excellent ferroelectric polarization of KNNFC0.015 through the generation of an internal field to promote charge carriers separation and reduce nonradiative recombination. Importantly, the accompanying electron carriers can easily move to the material surface and participate in redox reactions because they have low activation energy. Therefore, ferroelectric polarization and defects play synergetic roles in enhancing piezocatalytic performance.
- piezocatalytic;
- water purification;
- ferroelectric polarization;
- beneficial defects

FullText(HTML)

Supplements(1)

Supplementary Information-10.1007s12613-023-2671-0.docx

References(33)

References

[1]	C.Y. Yu, M.X. Tan, Y. Li, et al., Ultrahigh piezocatalytic capability in eco-friendly BaTiO₃ nanosheets promoted by 2D morphology engineering, J. Colloid Interface Sci., 596(2021), p. 288. doi: 10.1016/j.jcis.2021.03.040
[2]	J.M. Wu, W.E. Chang, Y.T. Chang, and C.K. Chang, Piezo-catalytic effect on the enhancement of the ultra-high degradation activity in the dark by single- and few-layers MoS₂ nanoflowers, Adv. Mater., 28(2016), No. 19, p. 3718. doi: 10.1002/adma.201505785
[3]	Y. Zhang, H. Khanbareh, S. Dunn, et al., High efficiency water splitting using ultrasound coupled to a BaTiO₃ nanofluid, Adv. Sci., 9(2022), No. 9, art. No. e2105248. doi: 10.1002/advs.202105248
[4]	S. Li, Z.C. Zhao, J.Z. Zhao, Z.T. Zhang, X. Li, and J.M. Zhang, Recent advances of ferro-, piezo-, and pyroelectric nanomaterials for catalytic applications, ACS Appl. Nano Mater., 3(2020), No. 2, p. 1063. doi: 10.1021/acsanm.0c00039
[5]	L.L. Zhao, Y. Zhang, F.L. Wang, et al., BaTiO₃ nanocrystal-mediated micro pseudo-electrochemical cells with ultrasound-driven piezotronic enhancement for polymerization, Nano Energy, 39(2017), p. 461. doi: 10.1016/j.nanoen.2017.07.037
[6]	H. Mohapatra, M. Kleiman, and A.P. Esser-Kahn, Mechanically controlled radical polymerization initiated by ultrasound, Nat. Chem., 9(2017), No. 2, p. 135. doi: 10.1038/nchem.2633
[7]	A.W. Morawski, K. Ćmielewska, E. Ekiert, et al., Effective green ammonia synthesis from gaseous nitrogen and CO₂ saturated-water vapour utilizing a novel photocatalytic reactor, Chem. Eng. J., 446(2022), art. No. 137030. doi: 10.1016/j.cej.2022.137030
[8]	S.Z. Oener, M.J. Foster, and S.W. Boettcher, Accelerating water dissociation in bipolar membranes and for electrocatalysis, Science, 369(2020), No. 6507, p. 1099. doi: 10.1126/science.aaz1487
[9]	B.W. Yuan, J. Wu, N. Qin, E.Z. Lin, Z.H. Kang, and D.H. Bao, Sm-doped Pb(Mg_1/3Nb_2/3)O₃–xPbTiO₃ piezocatalyst: Exploring the relationship between piezoelectric property and piezocatalytic activity, Appl. Mater. Today, 17(2019), p. 183. doi: 10.1016/j.apmt.2019.07.015
[10]	H. Lin, Z. Wu, Y.M. Jia, W.J. Li, R.K. Zheng, and H.S. Luo, Piezoelectrically induced mechano-catalytic effect for degradation of dye wastewater through vibrating Pb(Zr_0.52Ti_0.48)O₃ fibers, Appl. Phys. Lett., 104(2014), No. 16, art. No. 162907. doi: 10.1063/1.4873522
[11]	J. Wu, N. Qin, and D.H. Bao, Effective enhancement of piezocatalytic activity of BaTiO₃ nanowires under ultrasonic vibration, Nano Energy, 45(2018), p. 44. doi: 10.1016/j.nanoen.2017.12.034
[12]	J. Wu, N. Qin, B.W. Yuan, E.Z. Lin, and D.H. Bao, Enhanced pyroelectric catalysis of BaTiO₃ nanowires for utilizing waste heat in pollution treatment, ACS Appl. Mater. Interfaces, 10(2018), No. 44, p. 37963. doi: 10.1021/acsami.8b11158
[13]	J.A. Wu, Q. Xu, E.Z. Lin, et al., Insights into the role of ferroelectric polarization in piezocatalysis of nanocrystalline BaTiO₃, ACS Appl. Mater. Interfaces, 10(2018), No. 21, p. 17842. doi: 10.1021/acsami.8b01991
[14]	K. Wang, F.Z. Yao, W. Jo, et al., Temperature-insensitive (K,Na)NbO₃-based lead-free piezoactuator ceramics, Adv. Funct. Mater., 23(2013), No. 33, p. 4079. doi: 10.1002/adfm.201203754
[15]	T.L. Zhao, A.A. Bokov, J.G. Wu, et al., Giant piezoelectricity of ternary perovskite ceramics at high temperatures, Adv. Funct. Mater., 29(2019), No. 12, art. No. 1807920. doi: 10.1002/adfm.201807920
[16]	F. Wu, Y.H. Yu, H.A. Yang, et al., Simultaneous enhancement of charge separation and hole transportation in a TiO₂–SrTiO₃ core–shell nanowire photoelectrochemical system, Adv. Mater., 29(2017), No. 28, art. No. 1701432. doi: 10.1002/adma.201701432
[17]	B. Yang, H.B. Chen, Y.D. Yang, et al., Insights into the tribo-/pyro-catalysis using Sr-doped BaTiO₃ ferroelectric nanocrystals for efficient water remediation, Chem. Eng. J., 416(2021), art. No. 128986. doi: 10.1016/j.cej.2021.128986
[18]	L.M. Tan, Q. Sun, and Y.Y. Wang, Outstanding piezoelectric properties of Al-substituted potassium–sodium niobate-based lead-free piezoceramics, J. Alloys Compd., 836(2020), art. No. 155419. doi: 10.1016/j.jallcom.2020.155419
[19]	X.C. Wang, C. Meng, and Y.Y. Wang, Insight for the construction of R–T phase boundary in KNN piezoceramics from the view of energy band structure and electron density, Ceram. Int., 47(2021), No. 20, p. 28500. doi: 10.1016/j.ceramint.2021.07.006
[20]	A. Zhang, Z.Y. Liu, B. Xie, et al., Vibration catalysis of eco-friendly Na_0.5K_0.5NbO₃-based piezoelectric: An efficient phase boundary catalyst, Appl. Catal. B, 279(2020), art. No. 119353. doi: 10.1016/j.apcatb.2020.119353
[21]	F.Z. Yao, E.A. Patterson, K. Wang, W. Jo, J. Rödel, and J.F. Li, Enhanced bipolar fatigue resistance in CaZrO₃-modified (K,Na)NbO₃ lead-free piezoceramics, Appl. Phys. Lett., 104(2014), No. 24, art. No. 242912. doi: 10.1063/1.4884826
[22]	M. Zhou, X.M. Lu, D.Y. Yang, et al., Induced core–shell structure and the electric properties of (K_0.48Na_0.52)_0.95Li_0.05Nb_0.95Sb_0.05O₃ ceramics, Phys. Chem. Chem. Phys., 19(2017), No. 3, p. 1868. doi: 10.1039/C6CP06111G
[23]	K. Wang, J.F. Li, and N. Liu, Piezoelectric properties of low-temperature sintered Li-modified (Na,K)NbO₃ lead-free ceramics, Appl. Phys. Lett., 93(2008), No. 9, art. No. 092904. doi: 10.1063/1.2977551
[24]	J. Kong, L.L. Li, J.E. Liu, F.P. Marlton, M.R.V. Jørgensen, and A. Pramanick, A local atomic mechanism for monoclinic–tetragonal phase boundary creation in Li-doped Na_0.5K_0.5NbO₃ ferroelectric solid solution, Inorg. Chem., 61(2022), No. 10, p. 4335. doi: 10.1021/acs.inorgchem.1c03501
[25]	H.J. Yu, F. Chen, X.W. Li, et al., Synergy of ferroelectric polarization and oxygen vacancy to promote CO₂ photoreduction, Nat. Commun., 12(2021), art. No. 4594. doi: 10.1038/s41467-021-24882-3
[26]	H.E. Mgbemere, M. Hinterstein, and G.A. Schneider, Structural phase transitions and electrical properties of (K_xNa_1−x)NbO₃-based ceramics modified with Mn, J. Eur. Ceram. Soc., 32(2012), No. 16, p. 4341. doi: 10.1016/j.jeurceramsoc.2012.07.033
[27]	M.A. Rafiq, M.E. Costa, A. Tkach, and P.M. Vilarinho, Impedance analysis and conduction mechanisms of lead free potassium sodium niobate (KNN) single crystals and polycrystals: A comparison study, Cryst. Growth Des., 15(2015), No. 3, p. 1289. doi: 10.1021/cg5016884
[28]	M. Zhou, X.M. Lu, L. Liu, et al., Room temperature multiferroic properties and polymorphic phase transition-induced noticeable magnetodielectric anomalies in Fe/Co co-doped (K_0.52Na_0.48)NbO₃ ceramics, J. Alloys Compd., 836(2020), art. No. 155519. doi: 10.1016/j.jallcom.2020.155519
[29]	L.S. Ewe and R. Abd-Shukor, Electrical transport properties of Pr_1–xSr_xMnO₃(x = 0 to 0.45), Adv. Appl. Ceram., 109(2010), No. 7, p. 426. doi: 10.1179/174367510X12722693956239
[30]	M. Zhou, X.M. Lu, X.Y. Xu, et al., Room temperature multiferroic behavior and magnetoelectric coupling in (K,Na)NbO₃-based ceramics, Ceram. Int., 44(2018), No. 12, p. 14169. doi: 10.1016/j.ceramint.2018.05.019
[31]	A. Kumar, J.N. Baker, P.C. Bowes, et al., Atomic-resolution electron microscopy of nanoscale local structure in lead-based relaxor ferroelectrics, Nat. Mater., 20(2021), No. 1, p. 62. doi: 10.1038/s41563-020-0794-5
[32]	B. Zhang, D. Lu, Z. Wang, et al., Highly efficient photocatalytic hydrogen production performance for 2D/0D g-C₃N₄/Zn_0.5Cd_0.5S with g-C₃N₄ as a transport medium for photogenerated charge carriers, J. Electrochem. Soc., 169(2022), No. 4, art. No. 046512. doi: 10.1149/1945-7111/ac6452
[33]	X.E. Ning, A.Z. Hao, Y.L. Cao, N. Lv, and D.Z. Jia, Boosting piezocatalytic performance of Ag decorated ZnO by piezo-electrochemical synergistic coupling strategy, Appl. Surf. Sci., 566(2021), art. No. 150730. doi: 10.1016/j.apsusc.2021.150730

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

通过铁电极化和缺陷协同增强环境友好型(K_0.52Na_0.48)NbO₃的压电催化性能

文章亮点

中文摘要

Synergically enhanced piezocatalysis performance of eco-friendly (K_0.52Na_0.48)NbO₃ through ferroelectric polarization and defects

Abstract

References

数据统计

Catalog