元素粉末反应合成制备多孔TiFe<sub>2</sub>金属间化合物

赵乾; 何真丽; 贺跃辉; 邱悦; 王重贺; 江垚

doi:10.1007/s12613-023-2748-9

Volume 31 Issue 4

Apr. 2024

Turn off MathJax

图(8) / 表(2)

数据统计

计量

文章访问数: 1382
HTML全文浏览量: 178
PDF下载量: 23
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2024 > 31(4): 764-772

Qian Zhao, Zhenli He, Yuehui He, Yue Qiu, Zhonghe Wang, and Yao Jiang, Porous TiFe₂ intermetallic compound fabricated via elemental powder reactive synthesis, Int. J. Miner. Metall. Mater., 31(2024), No. 4, pp. 764-772. https://doi.org/10.1007/s12613-023-2748-9

Cite this article as:

Qian Zhao, Zhenli He, Yuehui He, Yue Qiu, Zhonghe Wang, and Yao Jiang, Porous TiFe2 intermetallic compound fabricated via elemental powder reactive synthesis, Int. J. Miner. Metall. Mater., 31(2024), No. 4, pp. 764-772. https://doi.org/10.1007/s12613-023-2748-9

Citation:

PDF( 4373 KB)

引用本文 PDF XML SpringerLink

研究论文

元素粉末反应合成制备多孔TiFe₂金属间化合物

中南大学粉末冶金研究院, 粉末冶金国家重点实验室, 长沙 410083, 中国

* 共同第一作者

通讯作者:
江垚 E-mail: jiangyao@csu.edu.cn

文章亮点

(1) 通过元素粉末反应合成法制备了多孔TiFe₂金属间化合物。

(2) 阐明了多孔TiFe₂金属间化合物反应合成过程中的物相演变和孔隙形成机理。

(3) 多孔TiFe₂金属间化合物比多孔316L不锈钢具有更好的抗腐蚀性能。

中文摘要

金属间化合物兼具了陶瓷和传统金属的特点，表现出良好的抗腐蚀性和结构稳定性，在过滤分离领域以及催化领域具有一定的应用潜力。本文通过元素粉末反应合成法制备了多孔TiFe₂金属间化合物，研究了反应合成过程中的物相演变和孔隙形成机理，以及在碱性溶液中的析氢反应。研究结果表明，通过Ti、Fe元素粉末的扩散反应合成了孔隙度为34.4%–56.4%的多孔TiFe₂金属间化合物，孔隙主要是由拱桥效应和Kirkendall效应共同作用产生。多孔TiFe₂金属间化合物比316L不锈钢具有更好的抗腐蚀性能。多孔TiFe₂金属间化合物作为阴极在10 mA⸱cm⁻²和100 mA⸱cm⁻²电流密度下的过电位分别为220.6 mV和295.6 mV，具有较好的催化性能。因此，合成具有可控孔结构和优异抗腐蚀性能的多孔Fe基金属间化合物在过滤分离领域具有一定的应用潜力。

关键词:

Research Article

Porous TiFe₂ intermetallic compound fabricated via elemental powder reactive synthesis

+ Author Affiliations

Abstract

Abstract

Porous intermetallics show potential in the field of filtration and separation as well as in the field of catalysis. Herein, porous TiFe₂ intermetallics were fabricated by the reactive synthesis of elemental powders. The phase transformation and pore formation of porous TiFe₂ intermetallics were investigated, and its corrosion behavior and hydrogen evolution reaction (HER) performance in alkali solution were studied. Porous TiFe₂ intermetallics with porosity in the range of 34.4%–56.4% were synthesized by the diffusion reaction of Ti and Fe elements, and the pore formation of porous TiFe₂ intermetallic compound is the result of a combination of the bridging effect and the Kirkendall effect. The porous TiFe₂ samples exhibit better corrosion resistance compared with porous 316L stainless steel, which is related to the formation of uniform nanosheets on the surface that hinder further corrosion, and porous TiFe₂ electrode shows the overpotential of 220.6 and 295.6 mV at 10 and 100 mA·cm⁻², suggesting a good catalytic performance. The synthesized porous Fe-based intermetallic has a controllable pore structure as well as excellent corrosion resistance, showing its potential in the field of filtration and separation.
- TiFe₂ intermetallic compound;
- porous materials;
- reactive synthesis;
- corrosion behavior;
- hydrogen evolution reaction

FullText(HTML)

Supplements(0)

References(39)

References

[1]	Y. Jiang, Y.H. He, and H.Y. Gao, Recent progress in porous intermetallics: Synthesis mechanism, pore structure, and material properties, J. Mater. Sci. Technol., 74(2021), p. 89. doi: 10.1016/j.jmst.2020.10.007
[2]	J.J. Wan, Z.M. Zhang, Y.M. Wang, et al., Synergistic covalent-and-supramolecular polymers connected by [2]pseudorotaxane moieties, Chem. Commun., 57(2021), No. 60, p. 7374. doi: 10.1039/D1CC02873A
[3]	Y.L. Zhang, A.H. Feng, S.J. Qu, J. Shen, and D.L. Chen, Microstructure and low cycle fatigue of a Ti₂AlNb-based lightweight alloy, J. Mater. Sci. Technol., 44(2020), p. 140. doi: 10.1016/j.jmst.2020.01.032
[4]	Z.C. Shang, X.P. Cai, H. Wang, et al., High temperature anti-oxidation and filtration behavior of micro/nano-scale porous CoAl intermetallic synthesized via rapid thermal explosion, Corros. Sci., 219(2023), art. No. 111216. doi: 10.1016/j.corsci.2023.111216
[5]	Z.C. Shang, X.P. Cai, X.Y. Jiao, et al., 3D microstructure and anti-oxidation behavior of porous CoAl intermetallic fabricated by rapid thermal explosion, Corros. Sci., 208(2022), art. No. 110715. doi: 10.1016/j.corsci.2022.110715
[6]	X.Y. Jiao, P.Z. Feng, J.Z. Wang, X.R. Ren, and F. Akhtar, Exothermic behavior and thermodynamic analysis for the formation of porous TiAl₃ intermetallics sintering with different heating rates, J. Alloys Compd., 811(2019), art. No. 152056. doi: 10.1016/j.jallcom.2019.152056
[7]	Y.H. He, Y. Jiang, N.P. Xu, et al., Fabrication of Ti–Al micro/nanometer-sized porous alloys through the Kirkendall effect, Adv. Mater., 19(2007), No. 16, p. 2102. doi: 10.1002/adma.200602398
[8]	G.L. Hao, H. Wang, and X.Y. Li, Novel double pore structures of TiAl produced by powder metallurgy processing, Mater. Lett., 142(2015), p. 11. doi: 10.1016/j.matlet.2014.11.135
[9]	H. Sina, J. Corneliusson, K. Turba, and S. Iyengar, A study on the formation of iron aluminide (FeAl) from elemental powders, J. Alloys Compd., 636(2015), p. 261. doi: 10.1016/j.jallcom.2015.02.132
[10]	G. Chen, K.D. Liss, C. Chen, Y.H. He, X.H. Qu, and P. Cao, Porous FeAl alloys via powder sintering: Phase transformation, microstructure and aqueous corrosion behavior, J. Mater. Sci. Technol., 86(2021), p. 64. doi: 10.1016/j.jmst.2021.01.029
[11]	Y.M. Shu, A. Suzuki, N. Takata, and M. Kobashi, Fabrication of porous NiAl intermetallic compounds with a hierarchical open-cell structure by combustion synthesis reaction and space holder method, J. Mater. Process. Technol., 264(2019), p. 182. doi: 10.1016/j.jmatprotec.2018.09.010
[12]	T. Ide, M. Tane, and H. Nakajima, Fabrication of lotus-type porous NiAl and Ni₃Al intermetallic compounds, Solid State Phenom., 124-126(2007), p. 1721. doi: 10.4028/www.scientific.net/SSP.124-126.1721
[13]	L. Wu, Y.H. He, T. Lei, et al., The stability of hydrogen evolution activity and corrosion behavior of porous Ni₃Al–Mo electrode in alkaline solution during long-term electrolysis, Energy, 67(2014), p. 19. doi: 10.1016/j.energy.2014.02.033
[14]	B.T. Shen, Y.H. He, Z.H. Wang, L.P. Yu, Y. Jiang, and H.Y. Gao, Reactive synthesis of porous FeSi intermetallic compound, J. Alloys Compd., 826(2020), art. No. 154227. doi: 10.1016/j.jallcom.2020.154227
[15]	B.T. Shen, Y.H. He, W.H. Li, et al., Insight into electrochemical performance of porous Fe_xSi_y intermetallic anode for zinc electrowinning, Mater. Des., 191(2020), art. No. 108645. doi: 10.1016/j.matdes.2020.108645
[16]	B.T. Shen, Y.H. He, Z.L. He, Z.H. Wang, Y. Jiang, and H.Y. Gao, Porous Fe₅Si₃ intermetallic anode for the oxygen evolution reaction in acidic electrolytes, J. Colloid Interface Sci., 605(2022), p. 637. doi: 10.1016/j.jcis.2021.07.127
[17]	S. Malik, S. Kishore, S. Prasad, and M.P. Shah, A comprehensive review on emerging trends in industrial wastewater research, J. Basic Microbiol., 62(2022), No. 3-4, p. 296. doi: 10.1002/jobm.202100554
[18]	V. Kumar and S.K. Dwivedi, A review on accessible techniques for removal of hexavalent Chromium and divalent Nickel from industrial wastewater: Recent research and future outlook, J. Cleaner Prod., 295(2021), art. No. 126229. doi: 10.1016/j.jclepro.2021.126229
[19]	A.V. Baskar, N. Bolan, S.A. Hoang, et al., Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review, Sci. Total Environ., 822(2022), art. No. 153555. doi: 10.1016/j.scitotenv.2022.153555
[20]	R.M. Jain, K.H. Mody, J. Keshri, and B. Jha, Biological neutralization and biosorption of dyes of alkaline textile industry wastewater, Mar. Pollut. Bull., 84(2014), No. 1-2, p. 83. doi: 10.1016/j.marpolbul.2014.05.033
[21]	J.H. Jeon, A.B.C. Sola, J.Y. Lee, and R.K. Jyothi, Hydrometallurgical process development to recycle valuable metals from spent SCR deNO_X catalyst, Sci. Rep., 11(2021), No. 1, art. No. 22131. doi: 10.1038/s41598-021-01726-0
[22]	A.V. Boyarintsev, S.I. Stepanov, G.V. Kostikova, V.I. Zhilov, A.M. Safiulina, and A.Y. Tsivadze, Separation and purification of elements from alkaline and carbonate nuclear waste solutions, Nucl. Eng. Technol., 55(2023), No. 2, p. 391. doi: 10.1016/j.net.2022.09.030
[23]	A.A. Chichirov, N.D. Chichirova, A.A. Filimonova, A.I. Minibaev, and R.V. Buskin, Laboratory investigations of processing highly mineralized alkali solutions by means of electromembrane technology, Therm. Eng., 66(2019), No. 7, p. 527. doi: 10.1134/S0040601519070036
[24]	T. Hua, R.J. Haynes, and Y.F. Zhou, Removal of Al, Ga, As, V and Mo from alkaline wastewater using pilot-scale constructed wetlands, Environ. Sci. Pollut. Res. Int., 26(2019), No. 34, p. 35121. doi: 10.1007/s11356-019-06490-3
[25]	G. Tranchida, M. Clesi, F. Di Franco, F. Di Quarto, and M. Santamaria, Electronic properties and corrosion resistance of passive films on austenitic and duplex stainless steels, Electrochim. Acta, 273(2018), p. 412. doi: 10.1016/j.electacta.2018.04.058
[26]	N. Jeyaprakash, C.H. Yang, S.S. Karuppasamy, and M. Duraiselvam, Stellite 6 cladding on AISI type 316L stainless steel: Microstructure, nanohardness and corrosion resistance, Trans. Indian Inst. Met., 76(2023), No. 2, p. 491. doi: 10.1007/s12666-022-02731-1
[27]	A. Sharma, S. Shukla, M. Thombre, A. Bansod, and S. Untawale, An investigation of the effect of sensitization on the metallurgical characteristics of dissimilarly welded austenitic–ferritic stainless steel, Anti-Corros. Meth. Mater., 70(2023), No. 6, p. 361. doi: 10.1108/ACMM-04-2023-2797
[28]	R.R. Song, J.H. Han, M. Okugawa, et al., Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production, Nat. Commun., 13(2022), No. 1, art. No. 5157. doi: 10.1038/s41467-022-32768-1
[29]	Y. Qiu, Z.L. He, Y.H. He, Q. Zhao, Z.H. Wang, and Y. Jiang, Porous TiNi₃-based intermetallics as active and robust monolith catalysts for hydrogen evolution, Chem. Commun., 58(2022), No. 100, p. 13943. doi: 10.1039/D2CC05574K
[30]	J. Sun, N.K. Guo, T.S. Song, et al., Revealing the interfacial electron modulation effect of CoFe alloys with CoC_X encapsulated in N-doped CNTs for superior oxygen reduction, Adv. Powder Mater., 1(2022), No. 3, art. No. 100023. doi: 10.1016/j.apmate.2021.11.009
[31]	J. Abed, S. Ahmadi, L. Laverdure, et al. , In situ formation of nano Ni–Co oxyhydroxide enables water oxidation electrocatalysts durable at high current densities, Adv. Mater., 33(2021), No. 45, art. No. 2103812. doi: 10.1002/adma.202103812
[32]	A.I. Zhevnovatyi and G.F. Shenberg, Study of the production technology of porous titanium tubes, Sov. Powder Metall. Met. Ceram., 4(1965), No. 2, p. 95. doi: 10.1007/BF00777009
[33]	P.S. Liu and K.M. Liang, Review Functional materials of porous metals made by P/M, electroplating and some other techniques, J. Mater. Sci., 36(2001), No. 21, p. 5059. doi: 10.1023/A:1012483920628
[34]	Z.D. Lin, K.J. Song, and X.H. Yu, A review on wire and arc additive manufacturing of titanium alloy, J. Manuf. Process., 70(2021), p. 24. doi: 10.1016/j.jmapro.2021.08.018
[35]	J.Z. Niu, G.Q. Dai, Y.H. Guo, et al., Microstructure and mechanical properties of B modified Ti–Fe alloy manufactured by casting, forging and laser melting deposition, Composites Part B, 216(2021), art. No. 108854. doi: 10.1016/j.compositesb.2021.108854
[36]	J.J. Noël, N. Ebrahimi, and D.W. Shoesmith, Corrosion of titanium and titanium alloys, [in] K. Wandelt, ed., Encyclopedia of Interfacial Chemistry : Surface Science and Electrochemistry, Elsevier, Amsterdam, 2018, p. 192.
[37]	Y. Xu, Y.L. Huang, F.F. Cai, D.Z. Lu, and X.T. Wang, Study on corrosion behavior and mechanism of AISI 4135 steel in marine environments based on field exposure experiment, Sci. Total Environ., 830(2022), art. No. 154864. doi: 10.1016/j.scitotenv.2022.154864
[38]	C.X. Yi and B.F. Zhu, Corrosion inhibition effect of 2-hydroxy phosphonoacetic acid and pyrophosfate on Q235 steel, electrochemical noise and EIS analysis, Int. J. Electrochem. Sci., 14(2019), No. 7, p. 6759. doi: 10.20964/2019.07.28
[39]	Y. Zhao, L. Bai, Y.H. Sun, et al., Low-temperature alkali corrosion induced growth of nanosheet layers on NiTi alloy and their corrosion behavior and biological responses, Corros. Sci., 190(2021), art. No. 109654. doi: 10.1016/j.corsci.2021.109654

Relative Articles

Cited By

Proportional views

数据统计

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

数据统计

分享

计量

元素粉末反应合成制备多孔TiFe₂金属间化合物

文章亮点

中文摘要

Porous TiFe₂ intermetallic compound fabricated via elemental powder reactive synthesis

Abstract

References

数据统计

Catalog

留言板

数据统计

分享

计量

元素粉末反应合成制备多孔TiFe2金属间化合物

文章亮点

中文摘要

Porous TiFe2 intermetallic compound fabricated via elemental powder reactive synthesis

Abstract

References

数据统计

Catalog

元素粉末反应合成制备多孔TiFe₂金属间化合物

Porous TiFe₂ intermetallic compound fabricated via elemental powder reactive synthesis