软锰矿氢基矿相转化精准调控机制研究

王若枫; 袁帅; 李艳军; 高鹏; 李儒

doi:10.1007/s12613-023-2819-y

Volume 31 Issue 11

Nov. 2024

Turn off MathJax

图(14) / 表(3)

数据统计

计量

文章访问数: 499
HTML全文浏览量: 171
PDF下载量: 33
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2024 > 31(11): 2445-2457

Ruofeng Wang, Shuai Yuan, Yanjun Li, Peng Gao, and Ru Li, Hydrogen-based mineral phase transformation mechanism investigation of pyrolusite ore, Int. J. Miner. Metall. Mater., 31(2024), No. 11, pp. 2445-2457. https://doi.org/10.1007/s12613-023-2819-y

Cite this article as:

Ruofeng Wang, Shuai Yuan, Yanjun Li, Peng Gao, and Ru Li, Hydrogen-based mineral phase transformation mechanism investigation of pyrolusite ore, Int. J. Miner. Metall. Mater., 31(2024), No. 11, pp. 2445-2457. https://doi.org/10.1007/s12613-023-2819-y

Citation:

PDF( 3679 KB)

引用本文 PDF XML SpringerLink

研究论文

软锰矿氢基矿相转化精准调控机制研究

1)
东北大学资源与土木工程学院, 沈阳 110819, 中国
2)
难采选铁矿资源高效开发利用技术国家地方联合工程研究中心, 沈阳 110819, 中国

通讯作者:
袁帅 E-mail: yuanshuai_neu@163.com

文章亮点

(1) 论文提出了软锰矿氢基矿相转化新技术

(2) 阐明了软锰矿还原反应历程及反应机理

(3) 探究了软锰矿微观结构演化规律并建立了反应动力学模型

中文摘要

为实现复杂氧化锰矿资源高效清洁利用，论文提出氢基矿相转化技术处理软锰矿，以期高效转化为高活性方锰矿，为后续高效利用奠定基础。论文系统研究了氢基矿相转化过程中矿物物相转变机理并建立了锰矿物等温反应动力学模型。研究表明软锰矿在焙烧温度650°C，焙烧时间25 min，氢气浓度20%的反应条件下，可获得二价锰的占有率96.44%的转化产品，锰矿物主要以方锰矿的形式存在。通过研究软锰矿还原动力学及微观结构演变规律，揭示了方锰矿的生成机制，明确了最优反应动力学模型为随机成核与随后生长模型（n = 3/2），软锰矿的还原从颗粒表面到内核逐步进行，氢基矿相转化过程软锰矿反应主要历程为MnO₂ → Mn₂O₃ → Mn₃O₄ → MnO。研究成果为复杂氧化锰矿资源高效清洁利用提供理论基础。

关键词:

Research Article

Hydrogen-based mineral phase transformation mechanism investigation of pyrolusite ore

+ Author Affiliations

Abstract

Abstract

Pyrolusite comprises the foremost manganese oxides and is a major source of manganese production. An innovative hydrogen-based mineral phase transformation technology to pyrolusite was proposed, where a 96.44% distribution rate of divalent manganese (Mn²⁺) was observed at an optimal roasting temperature of 650°C, a roasting time of 25 min, and an H₂ concentration of 20vol%; under these conditions. The manganese predominantly existed in the form of manganosite. This study investigated the generation mechanism of manganosite based on the reduction kinetics, phase transformation, and structural evolution of pyrolusite and revealed that high temperature improved the distribution rate, and the optimal kinetic model for the reaction was the random nucleation and growth model (reaction order, n = 3/2) with an activation energy (E_a) of 24.119 kJ·mol⁻¹. Throughout the mineral phase transformation, manganese oxide from the outer layer of particles moves inward to the core. In addition, pyrolusite follows the reduction sequence of MnO₂ → Mn₂O₃ → Mn₃O₄ → MnO, and the reduction of manganese oxides in each valence state simultaneously proceeds. These findings provide significant insight into the efficient and clean utilization of pyrolusite.
- reduction;
- pyrolusite;
- phase transformation;
- microstructural evolution

FullText(HTML)

Supplements(0)

References(49)

References

[1]	M.J. Shi, H.T. Zhu, C. Chen, J.T. Jiang, L.P. Zhao, and C. Yan, Synergistically coupling of graphene quantum dots with Zn-intercalated MnO₂ cathode for high-performance aqueous Zn-ion batteries, Int. J. Miner. Metall. Mater., 30(2023), No. 1, p. 25. doi: 10.1007/s12613-022-2441-4
[2]	W. Chen, G.D. Li, A. Pei, et al., A manganese–hydrogen battery with potential for grid-scale energy storage, Nat. Energy, 3(2018), p. 428. doi: 10.1038/s41560-018-0147-7
[3]	T. Keller and I. Baker, Manganese-based permanent magnet materials, Prog. Mater. Sci., 124(2022), art. No. 100872. doi: 10.1016/j.pmatsci.2021.100872
[4]	D.Y. Chung, P.J. Heaney, J.E. Post, J.E. Stubbs, and P.J. Eng, Synchrotron X-ray diffraction of pyrolusite (MnO₂) and rutile (TiO₂) during heating to ~1000°C, J. Phys. Chem. Solids, 177(2023), art. No. 111284. doi: 10.1016/j.jpcs.2023.111284
[5]	B.B. Liu, L. Zhang, Y.B. Zhang, G.H. Han, and B. Zhang, Innovative methodology for co-treatment of mill scale scrap and manganese ore via oxidization roasting-magnetic separation for preparation of ferrite materials, Ceram. Int., 47(2021), No. 5, p. 6139. doi: 10.1016/j.ceramint.2020.10.193
[6]	X.Y. Deng, Y.L. Feng, H.R. Li, Z.W. Du, J.X. Kang, and C.L. Guo, Preparation of sodium manganate from low-grade pyrolusite by alkaline predesilication–fluidized roasting technique, Trans. Nonferrous Met. Soc. China, 28(2018), No. 5, p. 1045. doi: 10.1016/S1003-6326(18)64742-9
[7]	K.Q. Li, J. Chen, J.H. Peng, M. Omran, and G. Chen, Efficient improvement for dissociation behavior and thermal decomposition of manganese ore by microwave calcination, J. Cleaner Prod., 260(2020), art. No. 121074. doi: 10.1016/j.jclepro.2020.121074
[8]	H.M. Baioumy, M.Z. Khedr, and A.H. Ahmed, Mineralogy, geochemistry and origin of Mn in the high-Mn iron ores, Bahariya Oasis, Egypt, Ore Geol. Rev., 53(2013), p. 63. doi: 10.1016/j.oregeorev.2012.12.009
[9]	J. Liu, R. He, X. Xing, Z. Wang, and T. Xiong, Insight into mineralogy of a low-grade manganese ore for separation, J. Min. Sci., 57(2021), No. 6, p. 1049. doi: 10.1134/S1062739121060181
[10]	B.B. Liu, Y.B. Zhang, M.M. Lu, Z.J. Su, G.H. Li, and T. Jiang, Extraction and separation of manganese and iron from ferruginous manganese ores: A review, Miner. Eng., 131(2019), p. 286. doi: 10.1016/j.mineng.2018.11.016
[11]	D.J. Liu, L. Gao, G. Chen, et al., Enhancement effects of distiller’s dried grains as reducing agents on the kinetics and leaching of pyrolusite from manganese ore, J. Mater. Res. Technol., 19(2022), p. 4270. doi: 10.1016/j.jmrt.2022.07.005
[12]	C. Yang, X.X. Duan, X.F. Zhang, et al., Acid-free extraction of manganese from pyrolusite tailings by in situ redox interaction with waste copperas, Process. Saf. Environ. Prot., 169(2023), p. 149. doi: 10.1016/j.psep.2022.11.026
[13]	S. Keshavarz, F. Faraji, F. Rashchi, and M. Mokmeli, Bioleaching of manganese from a low-grade pyrolusite ore using Aspergillus Niger: Process optimization and kinetic studies, J. Environ. Manage., 285(2021), art. No. 112153. doi: 10.1016/j.jenvman.2021.112153
[14]	J.X. Kang, Y.L. Feng, H.R. Li, Z.W. Du, X.Y. Deng, and H.J. Wang, New understanding of the reduction mechanism of pyrolusite in the Acidithiobacillus ferrooxidans bio-leaching system, Electrochim. Acta, 297(2019), p. 443. doi: 10.1016/j.electacta.2018.12.031
[15]	J.R. Lan, Y. Sun, L. Guo, Z.M. Li, D.Y. Du, and T.C. Zhang, A novel method to recover ammonia, manganese and sulfate from electrolytic manganese residues by bio-leaching, J. Cleaner Prod., 223(2019), p. 499. doi: 10.1016/j.jclepro.2019.03.098
[16]	K.Q. Li, J. Chen, J.H. Peng, R. Ruan, C. Srinivasakannan, and G. Chen, Pilot-scale study on enhanced carbothermal reduction of low-grade pyrolusite using microwave heating, Powder Technol., 360(2020), p. 846. doi: 10.1016/j.powtec.2019.11.015
[17]	J. Chen, F. He, L. Gao, S.H. Guo, M. Omran, and G. Chen, Rapid preparation of manganese monoxide by microwave-enhanced selective carbothermal reduction, Front. Energy Res., 10(2022), art. No. 845303. doi: 10.3389/fenrg.2022.845303
[18]	J.R. Ju, R.Y. Ma, Y.H. Li, et al., An efficient and clean method for the selective extraction and recovery of manganese from pyrolusite using ammonium sulfate roasting-water leaching and carbonate precipitation, Miner. Eng., 203(2023), art. No. 108356. doi: 10.1016/j.mineng.2023.108356
[19]	Y.L. Feng, Z.L. Cai, H.R. Li, Z.W. Du, and X.W. Liu, Fluidized roasting reduction kinetics of low-grade pyrolusite coupling with pretreatment of stone coal, Int. J. Miner. Metall. Mater., 20(2013), No. 3, p. 221. doi: 10.1007/s12613-013-0716-5
[20]	K.D. Yang, X.J. Ye, J. Su, et al., Response surface optimization of process parameters for reduction roasting of low-grade pyrolusite by bagasse, Trans. Nonferrous Met. Soc. China, 23(2013), No. 2, p. 548. doi: 10.1016/S1003-6326(13)62498-X
[21]	K.Q. Li, G. Chen, X.T. Li, et al., High-temperature dielectric properties and pyrolysis reduction characteristics of different biomass-pyrolusite mixtures in microwave field, Bioresour. Technol., 294(2019), art. No. 122217. doi: 10.1016/j.biortech.2019.122217
[22]	H. Wu, Y.L. Feng, H.R. Li, H.J. Wang, and J.R. Ju, Co-recovery of manganese from pyrolusite and gold from carbonaceous gold ore using fluidized roasting coupling technology, Chem. Eng. Process., 147(2020), art. No. 107742. doi: 10.1016/j.cep.2019.107742
[23]	B. Zhao, X.Y. Kong, Y.S. Sun, Y.X. Han, and Y.J. Li, Novel metallic Fe recovery from copper smelting slag by the deep reduction method with renewable biochar reducing agent: Phase transformation process and Fe particle growth optimization, Process. Saf. Environ. Prot., 175(2023), p. 303. doi: 10.1016/j.psep.2023.05.036
[24]	J.Y. Zhu, Q. Liu, Z. Zou, Q.S. Zhu, H.Z. Li, and H.R. Li, CFD simulation for reduction of pyrolusite in fluidized beds, Particuology, 79(2023), p. 109. doi: 10.1016/j.partic.2022.10.011
[25]	J.G. Li and B.L. Yang, Multi-scale CFD simulations of bubbling fluidized bed methanation process, Chem. Eng. J., 377(2019), art. No. 119818. doi: 10.1016/j.cej.2018.08.204
[26]	D. Ngoy, D. Sukhomlinov, and M. Tangstad, Pre-reduction behaviour of manganese ores in H₂ and CO containing gases, ISIJ Int., 60(2020), No. 11, p. 2325. doi: 10.2355/isijinternational.ISIJINT-2020-120
[27]	C.H. Eom and D.J. Min, Kinetics of the formation reaction of manganese carbide under various gases, Met. Mater. Int., 22(2016), No. 1, p. 129. doi: 10.1007/s12540-015-5419-1
[28]	X.D. Mao, P. Garg, X.J. Hu, et al., Kinetic analysis of iron ore powder reaction with hydrogen–carbon monoxide, Int. J. Miner. Metall. Mater., 29(2022), No. 10, p. 1882. doi: 10.1007/s12613-022-2512-6
[29]	A. Cheraghi, H. Yoozbashizadeh, and J. Safarian, Gaseous reduction of manganese ores: A review and theoretical insight, Miner. Process. Extr. Metall. Rev., 41(2020), No. 3, p. 198. doi: 10.1080/08827508.2019.1604523
[30]	B.B. Liu, Y.B. Zhang, Z.J. Su, Z.W. Peng, G.H. Li, and T. Jiang, Thermodynamic analysis and reduction of MnO₂ by methane–hydrogen gas mixture, JOM, 69(2017), No. 9, p. 1669. doi: 10.1007/s11837-017-2456-x
[31]	N. Anacleto, O. Ostrovski, and S. Ganguly, Reduction of manganese oxides by methane-containing gas, ISIJ Int., 44(2004), No. 9, p. 1480. doi: 10.2355/isijinternational.44.1480
[32]	L. Wang, P.M. Guo, L.B. Kong, and P. Zhao, Industrial application prospects and key issues of the pure-hydrogen reduction process, Int. J. Miner. Metall. Mater., 29(2022), No. 10, p. 1922. doi: 10.1007/s12613-022-2478-4
[33]	H. Zheng, O. Daghagheleh, T. Wolfinger, B. Taferner, J. Schenk, and R.S. Xu, Fluidization behavior and reduction kinetics of pre-oxidized magnetite-based iron ore in a hydrogen-induced fluidized bed, Int. J. Miner. Metall. Mater., 29(2022), No. 10, p. 1873. doi: 10.1007/s12613-022-2511-7
[34]	J.R. Lan, Y. Sun, Y.G. Du, D.Y. Du, T.C. Zhang, and J. Li, Environmentally-friendly bioleaching of manganese from pyrolusite: Performance and mechanisms, J. Cleaner Prod., 249(2020), art. No. 119354. doi: 10.1016/j.jclepro.2019.119354
[35]	K.J. Laidler, The development of the Arrhenius equation, J. Chem. Educ., 61(1984), No. 6, art. No. 494. doi: 10.1021/ed061p494
[36]	X. Liu, P. Gao, S. Yuan, Y. Lv, and Y.X. Han, Clean utilization of high-iron red mud by suspension magnetization roasting, Miner. Eng., 157(2020), art. No. 106553. doi: 10.1016/j.mineng.2020.106553
[37]	S. Yuan, X. Wang, H. Zhang, Y.J. Li, and X. Liu, Experimental and mechanism research of the effects of alkali on the reduction reaction of hematite during roasting reduction reaction, Adv. Powder Technol., 33(2022), No. 6, art. No. 103592. doi: 10.1016/j.apt.2022.103592
[38]	S. Yuan, Y.H. Qin, Y.P. Jin, and Y.J. Li, Suspension roasting process of vanadium-bearing stone coal: Characterization, kinetics and thermodynamics, Trans. Nonferrous Met. Soc. China, 32(2022), No. 11, p. 3767. doi: 10.1016/S1003-6326(22)66056-4
[39]	X.J. Xie, C. Lu, R. Xu, X.Q. Yang, L. Yan, and C.L. Su, Arsenic removal by manganese-doped mesoporous iron oxides from groundwater: Performance and mechanism, Sci. Total Environ., 806(2022), art. No. 150615. doi: 10.1016/j.scitotenv.2021.150615
[40]	F.X. Tian, M.H. Zhu, X.L. Liu, W.F. Tu, and Y.F. Han, Dynamic structure of highly disordered manganese oxide catalysts for low-temperature CO oxidation, J. Catal., 401(2021), p. 115. doi: 10.1016/j.jcat.2021.07.016
[41]	D.X. Gong, H. Tong, J.P. Xiao, et al., Self-standing manganese dioxide/graphene carbon nanotubes film electrode for symmetric supercapacitor with high energy density and superior long cycling stability, Ceram. Int., 47(2021), No. 23, p. 33020. doi: 10.1016/j.ceramint.2021.08.202
[42]	A. Derri, M. Guezzoul, A. Mokadem, et al., Insight into the photoluminescence and morphological characteristics of transition metals (TM = Mn, Ni, Co, Cu)-doped ZnO semiconductor: A comparative study, Opt. Mater., 145(2023), art. No. 114467. doi: 10.1016/j.optmat.2023.114467
[43]	N. Abinaya, M.C. Robert, N. Srinivasan, and S. Saravanakumar, Electron density mapping and bonding in Mn doped CoFe₂O₄ using XRD, and its correlation with room temperature optical and magnetic properties, J. Magn. Magn. Mater., 580(2023), art. No. 170938. doi: 10.1016/j.jmmm.2023.170938
[44]	C.S. Shao, C.Y. Ding, S.S. Wu, et al., Ultrahigh concentration surface oxygen vacancies in ferrite foams for broadened electromagnetic absorption bandwidth, Mater. Res. Bull., 167(2023), art. No. 112411. doi: 10.1016/j.materresbull.2023.112411
[45]	J.W. Yu, Y.X. Han, Y.J. Li, P. Gao, and W.B. Li, Mechanism and kinetics of the reduction of hematite to magnetite with CO–CO₂ in a micro-fluidized bed, Minerals, 7(2017), No. 11, art. No. 209. doi: 10.3390/min7110209
[46]	S. Yuan, Q. Zhang, H. Yin, and Y.J. Li, Efficient iron recovery from iron tailings using advanced suspension reduction technology: A study of reaction kinetics, phase transformation, and structure evolution, J. Hazard. Mater., 404(2021), art. No. 124067. doi: 10.1016/j.jhazmat.2020.124067
[47]	S. Vyazovkin and C.A. Wight, Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data, Thermochim. Acta, 340(1999), p. 53.
[48]	S. Vyazovkin, A.K. Burnham, J.M. Criado, L.A. Pérez-Maqueda, C. Popescu, and N. Sbirrazzuoli, ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data, Thermochim. Acta, 520(2011), No. 1-2, p. 1. doi: 10.1016/j.tca.2011.03.034
[49]	K.Q. Li, Q. Jiang, G. Chen, et al., Kinetics characteristics and microwave reduction behavior of walnut shell-pyrolusite blends, Bioresour. Technol., 319(2021), art. No. 124172. doi: 10.1016/j.biortech.2020.124172