Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8
Cite this article as:
Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8
Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8
Citation:
Guang Xu, Chushao Xu, Jiarong Zhao, and Xianjun Liu, Research on flow stress in ferrite deformation of a Ti-IF steel, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 34-36. https://doi.org/10.1016/S1005-8850(06)60010-8
The experiments of the ferrite warm deformation of ultra-low carbon (ULC) Ti-IF steel were carried out on a hot simulator and the influences of deformation temperature, strain, and strain rate on the flow stress were analyzed. New flow stress models suitable to ferrite warm forming of Ti-IF steel were given on the basis of analyzing the influence of deformation technology parameters on the flow stress.
The experiments of the ferrite warm deformation of ultra-low carbon (ULC) Ti-IF steel were carried out on a hot simulator and the influences of deformation temperature, strain, and strain rate on the flow stress were analyzed. New flow stress models suitable to ferrite warm forming of Ti-IF steel were given on the basis of analyzing the influence of deformation technology parameters on the flow stress.
下载: