Jiquan Sun, Haibin Zhang, and Quancheng Yu, Analysis of bending on the front end of sheet during hot rolling, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 54-59. https://doi.org/10.1016/S1005-8850(06)60014-5
Cite this article as:
Jiquan Sun, Haibin Zhang, and Quancheng Yu, Analysis of bending on the front end of sheet during hot rolling, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 54-59. https://doi.org/10.1016/S1005-8850(06)60014-5
Jiquan Sun, Haibin Zhang, and Quancheng Yu, Analysis of bending on the front end of sheet during hot rolling, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 54-59. https://doi.org/10.1016/S1005-8850(06)60014-5
Citation:
Jiquan Sun, Haibin Zhang, and Quancheng Yu, Analysis of bending on the front end of sheet during hot rolling, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 54-59. https://doi.org/10.1016/S1005-8850(06)60014-5
The analysis of bending in finishing rolling was performed. An asymmetrical rolling force model was established, and the upper and lower neutral points were determined. The bending which resulted from the asymmetrical rolling force at the roll gap was studied and related flexibility equations were proposed according to elastic mechanics. Moreover, material mechanics was used to analyze the effects of temperature difference and self-weight on the bending out of the roll gap, and the flexibility equations were constructed. The main factors on bending were summed up, and the bending rule in the rolling could be obtained. In addition practical calculation was made with the production data of ribbon steel from Laiwu Iron & Steel Group Co. Ltd.
The analysis of bending in finishing rolling was performed. An asymmetrical rolling force model was established, and the upper and lower neutral points were determined. The bending which resulted from the asymmetrical rolling force at the roll gap was studied and related flexibility equations were proposed according to elastic mechanics. Moreover, material mechanics was used to analyze the effects of temperature difference and self-weight on the bending out of the roll gap, and the flexibility equations were constructed. The main factors on bending were summed up, and the bending rule in the rolling could be obtained. In addition practical calculation was made with the production data of ribbon steel from Laiwu Iron & Steel Group Co. Ltd.
下载: