留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 13 Issue 6
Dec.  2006
数据统计

分享

计量
  • 文章访问数:  282
  • HTML全文浏览量:  85
  • PDF下载量:  9
  • 被引次数: 0
Zhengzhi Zhao, Yonglin Kang,  and Hao Yu, Microstructure and mechanical properties of automobile beam steels produced by EAF-CSP process, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 508-511. https://doi.org/10.1016/S1005-8850(06)60103-5
Cite this article as:
Zhengzhi Zhao, Yonglin Kang,  and Hao Yu, Microstructure and mechanical properties of automobile beam steels produced by EAF-CSP process, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 508-511. https://doi.org/10.1016/S1005-8850(06)60103-5
引用本文 PDF XML SpringerLink
Materials

Microstructure and mechanical properties of automobile beam steels produced by EAF-CSP process

  • 通讯作者:

    Zhengzhi Zhao    E-mail: zhaozhengzhi@sina.com

  • The microstructure, mechanical properties, and misorientation of automobile beam steels produced by EAF-CSP process were studied using optical microscopy (OM) and electron back-scattered diffraction (EBSD). It is shown that the microstructure of strips is mainly polygonal ferrite, and the average grain size is about 5-8 μm. The electron back-scattered diffraction results show that grain boundaries in ferrite are basically high-angle grain boundaries without remarkable preferred orientation. Hot strips of automobile beam steels possess a good combination of strength and plasticity because of their fine microstructures and low quantity of impurities.
  • Materials

    Microstructure and mechanical properties of automobile beam steels produced by EAF-CSP process

    + Author Affiliations
    • The microstructure, mechanical properties, and misorientation of automobile beam steels produced by EAF-CSP process were studied using optical microscopy (OM) and electron back-scattered diffraction (EBSD). It is shown that the microstructure of strips is mainly polygonal ferrite, and the average grain size is about 5-8 μm. The electron back-scattered diffraction results show that grain boundaries in ferrite are basically high-angle grain boundaries without remarkable preferred orientation. Hot strips of automobile beam steels possess a good combination of strength and plasticity because of their fine microstructures and low quantity of impurities.
    • loading

    Catalog


    • /

      返回文章
      返回