Xia Yang, Shiju Guo, and Farid Akhtar, Lubrication effectiveness of composite lubricants during P/M electrostatic die wall lubrication and warm compaction, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 528-531. https://doi.org/10.1016/S1005-8850(06)60107-2
Cite this article as:
Xia Yang, Shiju Guo, and Farid Akhtar, Lubrication effectiveness of composite lubricants during P/M electrostatic die wall lubrication and warm compaction, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 528-531. https://doi.org/10.1016/S1005-8850(06)60107-2
Xia Yang, Shiju Guo, and Farid Akhtar, Lubrication effectiveness of composite lubricants during P/M electrostatic die wall lubrication and warm compaction, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 528-531. https://doi.org/10.1016/S1005-8850(06)60107-2
Citation:
Xia Yang, Shiju Guo, and Farid Akhtar, Lubrication effectiveness of composite lubricants during P/M electrostatic die wall lubrication and warm compaction, J. Univ. Sci. Technol. Beijing, 13(2006), No. 6, pp. 528-531. https://doi.org/10.1016/S1005-8850(06)60107-2
The lubrication effectiveness of the composite lubricants, 50wt% ethylene bis-stearamide (EBS) wax + 50wt% graphite and 50wt% EBS wax + 50wt% BN, during the powder metallurgy (P/M) electrostatic die wall lubrication and warm compaction was studied. The results show that the combination of 50wt% EBS wax and 50wt% graphite has excellent lubrication performance, resulting in fairly high green densities, but the mixture of 50wt% EBS wax and 50wt% BN has less beneficial effect. In addition, corresponding die temperatures should be applied when different die wall lubricants are used to achieve the highest green densities.
The lubrication effectiveness of the composite lubricants, 50wt% ethylene bis-stearamide (EBS) wax + 50wt% graphite and 50wt% EBS wax + 50wt% BN, during the powder metallurgy (P/M) electrostatic die wall lubrication and warm compaction was studied. The results show that the combination of 50wt% EBS wax and 50wt% graphite has excellent lubrication performance, resulting in fairly high green densities, but the mixture of 50wt% EBS wax and 50wt% BN has less beneficial effect. In addition, corresponding die temperatures should be applied when different die wall lubricants are used to achieve the highest green densities.