Bo Wang, Ziquan Liu, Yuan Gao, Shangzhou Zhang, and Xiaoyan Wang, Microstructural evolution during aging of Ti-10V-2Fe-3Al titanium alloy, J. Univ. Sci. Technol. Beijing, 14(2007), No. 4, pp. 335-340. https://doi.org/10.1016/S1005-8850(07)60066-8
Cite this article as:
Bo Wang, Ziquan Liu, Yuan Gao, Shangzhou Zhang, and Xiaoyan Wang, Microstructural evolution during aging of Ti-10V-2Fe-3Al titanium alloy, J. Univ. Sci. Technol. Beijing, 14(2007), No. 4, pp. 335-340. https://doi.org/10.1016/S1005-8850(07)60066-8
Bo Wang, Ziquan Liu, Yuan Gao, Shangzhou Zhang, and Xiaoyan Wang, Microstructural evolution during aging of Ti-10V-2Fe-3Al titanium alloy, J. Univ. Sci. Technol. Beijing, 14(2007), No. 4, pp. 335-340. https://doi.org/10.1016/S1005-8850(07)60066-8
Citation:
Bo Wang, Ziquan Liu, Yuan Gao, Shangzhou Zhang, and Xiaoyan Wang, Microstructural evolution during aging of Ti-10V-2Fe-3Al titanium alloy, J. Univ. Sci. Technol. Beijing, 14(2007), No. 4, pp. 335-340. https://doi.org/10.1016/S1005-8850(07)60066-8
The development of microstructure during the aging of Ti-10V-2Fe-3A1 alloy in the 13 and (α+β) solution-treated and quenched conditions was investigated. The results showed that the isothermal holding below 400℃ yielded homogeneously distributed, spherical ω-phase particles. Fine α aggregates are formed uniformly within 13 grains by nucleating at at particles or β/ω interfaces. At higher temperatures, thin martensite plates decomposed in water-quenched condition. The formation of ω phase was avoided and coarse coarse α-phase plates directly precipitated from the 13 matrix. The highest hardness values were found when the alloys were aged at 400℃ for 8 h. The significance of the observations was discussed in terms of the effect of aging on the precipitations and property.
The development of microstructure during the aging of Ti-10V-2Fe-3A1 alloy in the 13 and (α+β) solution-treated and quenched conditions was investigated. The results showed that the isothermal holding below 400℃ yielded homogeneously distributed, spherical ω-phase particles. Fine α aggregates are formed uniformly within 13 grains by nucleating at at particles or β/ω interfaces. At higher temperatures, thin martensite plates decomposed in water-quenched condition. The formation of ω phase was avoided and coarse coarse α-phase plates directly precipitated from the 13 matrix. The highest hardness values were found when the alloys were aged at 400℃ for 8 h. The significance of the observations was discussed in terms of the effect of aging on the precipitations and property.
下载: