Haoqiang Yang, Shuisheng Xie, and Lei Li, Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method, J. Univ. Sci. Technol. Beijing, 14(2007), No. 5, pp. 443-448. https://doi.org/10.1016/S1005-8850(07)60087-5
Cite this article as:
Haoqiang Yang, Shuisheng Xie, and Lei Li, Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method, J. Univ. Sci. Technol. Beijing, 14(2007), No. 5, pp. 443-448. https://doi.org/10.1016/S1005-8850(07)60087-5
Haoqiang Yang, Shuisheng Xie, and Lei Li, Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method, J. Univ. Sci. Technol. Beijing, 14(2007), No. 5, pp. 443-448. https://doi.org/10.1016/S1005-8850(07)60087-5
Citation:
Haoqiang Yang, Shuisheng Xie, and Lei Li, Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method, J. Univ. Sci. Technol. Beijing, 14(2007), No. 5, pp. 443-448. https://doi.org/10.1016/S1005-8850(07)60087-5
State Key Laboratory for Fabrication and Processing of Nonferrous Metals, Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China
In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method (DCT), to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.
State Key Laboratory for Fabrication and Processing of Nonferrous Metals, Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China
In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method (DCT), to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.