The effects of slurry temperature, injection pressure, and piston velocity on the rheo-filling ability of semisolid A356 alloys were studied by the reho-diecasting methods. The results show that the slurry temperature of the semi-solid A356 aluminum alloy has an important effect on the filling ability; the higher the slurry temperature, the better is the filling ability, and the appropriate slurry temperature for rheo-filling is in the range of 585-595℃. The injection pressure also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the injection pressure is in the range of 15-25 MPa. The piston velocity also has a great effect on the filling ability, and it is appropriate to the rheo-filling when the piston velocity is in the range of 0.072-0.12 m/s. The filling ability of the slurry prepared by low superheat pouring with weak electromagnetic stirring is very good and the microstructural distribution in the rheo-formed die castings is homogeneous, which is advantageous to the high quality die casting.