H. Arabi, S. H. Seyedein, A. Mehryab, and B. Tolaminejad, Mathematical modeling and simulation of the interface region of a tri-layer composite material,brass-steel-brass,produced by cold rolling, Int. J. Miner. Metall. Mater., 16(2009), No. 2, pp. 189-196. https://doi.org/10.1016/S1674-4799(09)60032-7
Cite this article as:
H. Arabi, S. H. Seyedein, A. Mehryab, and B. Tolaminejad, Mathematical modeling and simulation of the interface region of a tri-layer composite material,brass-steel-brass,produced by cold rolling, Int. J. Miner. Metall. Mater., 16(2009), No. 2, pp. 189-196. https://doi.org/10.1016/S1674-4799(09)60032-7
H. Arabi, S. H. Seyedein, A. Mehryab, and B. Tolaminejad, Mathematical modeling and simulation of the interface region of a tri-layer composite material,brass-steel-brass,produced by cold rolling, Int. J. Miner. Metall. Mater., 16(2009), No. 2, pp. 189-196. https://doi.org/10.1016/S1674-4799(09)60032-7
Citation:
H. Arabi, S. H. Seyedein, A. Mehryab, and B. Tolaminejad, Mathematical modeling and simulation of the interface region of a tri-layer composite material,brass-steel-brass,produced by cold rolling, Int. J. Miner. Metall. Mater., 16(2009), No. 2, pp. 189-196. https://doi.org/10.1016/S1674-4799(09)60032-7
The object of this study was to find the optimum conditions for the production of a sandwich composite from the sheets of brass-steel-brass. The experimental data obtained during the production process were used to validate the simulation program, which was written to establish the relation between the interface morphology and the thickness reduction amount of the composite. For this purpose, two surfaces of a steel sheet were first prepared by scratching brushing before inserting it between two brass sheets with smooth surfaces. Three sheets were then subjected to a cold rolling process for producing a tri-layer composite with various thick- nesses. The sheet interface after rolling was studied by different techniques, and the bonding strength for each rolling condition was determined by peeling test. Moreover, a relation between interfacial bonding strength and thickness reduction was found. The simulation results were compared with the experimental data and the available theoretical models to modify the original simulation program with high application efficiency used for predicting the behavior of the interface under different pressures.
The object of this study was to find the optimum conditions for the production of a sandwich composite from the sheets of brass-steel-brass. The experimental data obtained during the production process were used to validate the simulation program, which was written to establish the relation between the interface morphology and the thickness reduction amount of the composite. For this purpose, two surfaces of a steel sheet were first prepared by scratching brushing before inserting it between two brass sheets with smooth surfaces. Three sheets were then subjected to a cold rolling process for producing a tri-layer composite with various thick- nesses. The sheet interface after rolling was studied by different techniques, and the bonding strength for each rolling condition was determined by peeling test. Moreover, a relation between interfacial bonding strength and thickness reduction was found. The simulation results were compared with the experimental data and the available theoretical models to modify the original simulation program with high application efficiency used for predicting the behavior of the interface under different pressures.
下载: